How to make a wreath of autumn leaves on your head

Home Do it yourself

A beautiful wreath made of natural material serves not just as a spectacular decoration for the interior of a house, apartment or office. You can make wreaths from natural materials with your own hands for specific purposes, for example, to improve indoor air, cleanse it of harmful substances, etc. In some cases, a wreath made of autumn material becomes an attribute for the festive surroundings and the formation of scenery. We invite you to learn how to make a wreath from autumn material with your own hands and what can be used for these purposes.

• 2 How to make a wreath from natural materials and meadow herbs
• 3 Wreaths made from natural materials and flowers
• 4 Wreath “Herbs of Provence”
• 5 DIY “Wreath made from natural material” craft
• 6 Wreath of dried flowers and sisal

DIY autumn wreaths made from ears of corn and natural materials

Autumn wreaths made from natural materials are most often made from the ears of valuable and weedy cereal crops. You can make a spectacular autumn wreath with your own hands from the following natural materials: straw and ears of wheat and rye, oats and buckwheat, etc.

Materials:

• ready-made wicker wreath;
• dry ears of wheat and oats;
• lace braid;
• glue gun

Progress

1. Prepare the grains for use - group them into small bunches and trim. You can secure the bundles using tape of a suitable color.
2. The wreath is not very thick, the base will show through in places, so the ears are glued directly to the base. Try, if possible, to mask the places where the ears are glued to the base, since hot glue, when dry, becomes noticeable and may look unaesthetic. Alternatively, you can use thin fishing line instead of glue to secure the wheat and oats.
3. First glue bunches of wheat in a circle, then bunches of oats. Try to distribute the grains evenly over the surface of the wreath.
4. Tie a beautiful lace ribbon to the finished wreath for hanging.

Advice:

Such a wreath will organically fit into a country-style interior, the main elements of which are lace, wickerwork, natural materials, etc.

A wreath can be made from almost any grain. You can dry the grains you like yourself or buy ready-made ones.

It is possible to make a wreath from fresh ears of corn. Bunches of cereals are also glued with hot glue. But be prepared for the fact that as the plants dry out, they will lose their color. For example, ears of oats, initially green, become faded over time.

Crafts with children

Most often we go to the forest or park to admire the leaf fall with our children. We offer you a master class on how to simply make a beautiful wreath, involving your child in the creative process.

It all starts with the collection. Choose different colored leaves: red, yellow, green. Different types: maple, rowan, birch, etc.

Let's cut out the base from a disposable plate; how to do it is shown in the photo below.

Now it’s the turn of the child’s hands and his imagination. Let your child apply glue and place the leaves on the base in the order that his imagination tells him.

If the branches stick out, they need to be trimmed.

If you and your child have collected not only leaves, but also various cones, then make the next wreath.

Related article: Macrame knots: basic patterns for beginners with photos and videos

For it, you can also use a base from a disposable plate, or you can cut it out of cardboard. Leaves should be glued in several rows and in a checkerboard pattern. For convenience, you can draw several circles.

When you reach the inner circle, start gluing on the rest of the decor. To begin with, let these be large acorns, and between them small cones (for example, alder).

Place small acorns on top into the space between the large ones.

When all the additional materials have been glued or you are satisfied with the existing result, we will begin making the loop. To do this, cut out two rectangles from cardboard, and a loop from woolen thread, twine or ribbon. We place it between the cardboards and glue it together.

Glue the loop to the back of the wreath and that’s it, it’s ready.

How to make a wreath from natural materials and meadow herbs

Before making a wreath from natural material and meadow grasses, you need to prepare all the tools and materials:

• cardboard base made of corrugated cardboard;
• various dried meadow herbs;
• sisal;
• plaid material;
• tape;
• glue gun

Progress

1. Cut out 2 circles from cardboard and glue them together. Cut a strip of fabric and wrap it around the base, securing the tip of the fabric with glue.
2. Trim the herbs, leaving the stem length approximately 1-2 cm. Form small bunches, secure each bunch with tape.
3. Heat up the glue gun and start gluing the bunches in a circle in this order: first glue the longest ones, then the shorter ones and the shortest ones. Each subsequent bunch should slightly cover the previous one. In this way, you can disguise the places where the grass sticks to the base.
4. Use green sisal fiber to decorate the base. Sisal is also glued with hot glue.
5. Tear off a few fibers of sisal and twist them to form a rope. The rope should be quite strong, as it will be used as a hanger for the wreath.
6. Attach the pendant to the wreath.

Adviсe:

• For this wreath, it is better to use several types of herbs, then the wreath will turn out more impressive.
• The same plant, collected at different times, will have a different color when dry.
• Straw can be used instead of sisal.
• The base can be wrapped with linen cord or braid.

Wreaths made from natural materials and flowers

We continue to make wreaths from natural materials, using various plants harvested from the summer for the creative process. Elegant and fragrant wreaths made of natural flowers, which have been dried and properly prepared, improve the atmosphere in the apartment and free the air from unpleasant odors.

Materials:

• dried buttercup flowers;
• willow twigs;
• fishing line;
• glue gun;
• green tape;
• yellow lace trim.

Progress

1. Make a ring from willow branches and wrap it with fishing line for strength. Leave to dry for 2-3 days. Once dry, the branches will retain their ring shape.
2. Before starting work, you need to prepare the flowers. To do this, they need to be trimmed and divided into small bunches.
3. Using floral tape, wrap each bunch. The tape will securely fix the flowers.
4. Start gluing the bunches of buttercups prepared as described above using a heated glue gun. Moving in a circle, gradually fill the entire space of the base. Apply the bundles in layers, and the next bundle should only slightly cover the bundle lying below, masking the places where the flowers are glued to the base.
5. Choose a beautiful lace braid to hang the wreath on the wall.

Adviсe:

• The flowers do not need to be glued; you can use thin wire and attach each bunch of wire to the base.
• The wreath can not only be hung on the wall or door, you can simply place it on a shelf, leaning it against a support.
• Dried ranunculus flowers are completely harmless, but you can replace them with other flowers. Try drying and then making a wreath from small inflorescences of bird cherry, apple tree, lilac, daisies, etc. The wreath will turn out not only beautiful, natural, but also very fragrant.
• Similar wreaths of dried flowers will fit perfectly into country-style interiors. Country style is a rustic style, which is distinguished by simplicity, naturalness and natural materials.

Wreath “Herbs of Provence”

Materials:

• wreath made of vines;
• 3 artificial lavender sprigs;
• fishing line;
• glue gun;
• ribbon.

Progress

1. Disassemble the branches into small inflorescences; if necessary, use wire cutters to cut through the wire.
2. Using a heated glue gun, glue the branches to the base, moving in a circle. Do not apply too much glue to the branches, otherwise the work will look sloppy.
3. Tie a matching ribbon to the wreath.

Adviсe:

• If you want to get a thicker and more magnificent wreath, use 5-6 artificial branches.
• The branches can be attached using thin colored bead wire. It comes in different colors, so it won’t be difficult to choose the right color.
• A wreath can be made using natural lavender sprigs. You can weave a wreath using live twigs and dry the lavender in the wreath, or you can make a wreath from already dried lavender flowers.
• By applying a drop of lavender essential oil to artificial sprigs, you will also be infused with the subtle aroma of blooming lavender.
• Such a wreath can be made for an interior in the Provence style, which is associated with the bright summer sun, the sea and huge fields of blooming lavender. Provence is a southern region of France. The word “Provence” itself translates as “province,” and interiors created in this style correspond to the style of provincial houses in the south of France.

paper decoration

Well, what if, for example, the weather does not allow you to collect live leaves or you live far from the park? What now, give up the idea of ​​​​creating an autumn wreath? Don't despair, colored paper will come to your aid. Here you can also involve children, this will certainly develop not only their imagination, but also fine motor skills. After all, we will make leaves using the origami technique.

Prepare:

• colored paper;
• scissors and stationery knife;
• glue;
• cardboard, preferably thick;
• stapler

We cut out squares with sides of 10 centimeters from paper. We will need 10 pieces for each sheet. The number of leaves will depend on the size of the base.

Take six squares and fold them diagonally. Next, we fold both corners to the fold line. We have formed corners at the bottom, we also bend them towards the center. For the other three squares, we will perform only the first stage of adding the right and left corners. But the tenth one will serve as a cutting for the leaves.

When we have prepared all the parts, we begin to glue them together in threes, as shown below.

Then we connect all threes together. We overlap them.

Glue the tenth square onto the back side, trim it along the edge of the sheet, but not the end. We fold this protruding part into a stalk.

Now we cut out the base from cardboard and begin to place our leaves. We overlap one on top of the other with the cuttings inward.

Related article: Tunic with one-piece sleeves: master class on sewing without a pattern

Our autumn wreath is ready. These are the various wreaths that can decorate your home in the fall.

DIY “Wreath made from natural material” craft

The craft “Wreath made of natural material” can be made with your own hands together with children of different ages. The creative process develops thinking and fine motor skills. We recommend choosing crafts such as a wreath made from natural materials for creativity with children and interior decoration. Below are some ideas.

Material:

• willow twigs.
• mimosa sprigs;
• yellow and blue feathers;
• decorative small blue eggs;
• thin wire;
• yellow checkered ribbon;
• glue gun

Progress

1. Tie the willow branches into a ring, tie the ring with wire.
2. Glue the mimosa branches to the willow base. Place mimosas at an equal distance from each other.
3. Glue the feathers first yellow, then blue.
4. Make several bows from checkered braid and glue them to the testicles.
5. Glue the eggs to the wreath, placing them between the feathers.
6. Make a wreath hanger from the same ribbon you used to make the bows.

Your original wreath is ready!

Adviсe:

• Such a wreath will look beautiful not only on the wall, but also on the festive Easter table.
• A wreath can be made from both live and dry willow and mimosa branches.
• If you cannot find ready-made eggs for decoration, then you can make them yourself (from clay, plastic, salt dough, papier-mâché) and paint them.

From leaves and berries of rowan

To create it you will need:

• leaves, it is better to take birch or similar ones;
• rowan berries;
• dried flowers to choose from;
• thin branches;
• cardboard;
• newspapers;
• twine or ribbon;
• masking tape;
• glue.

Cut a circle out of cardboard and cover it with several layers of newspaper using masking tape. We add as much paper until we get the desired thickness.

Using the same tape, we begin to cover the surface of the base with overlapping leaves. You can also use glue.

In principle, such a wreath looks beautiful in itself, but let's continue to decorate it. To do this, distribute twigs with berries and sprigs of dried flowers throughout the wreath.

Now put the wreath aside and cut out four hearts from cardboard.

You can make them the same size, or you can make one of the pairs a little smaller than the others, as you decide.

Glue them in pairs, not forgetting to put a loop of twine (or ribbon) between them.

Now we cover each side of the hearts with leaves. We cut off the excess.

Related article: DIY modeling clay: a simple recipe for crafts

Next, take the branches and chop them finely.

Apply glue to the edges of the hearts and sprinkle these places with crumbs from twigs.

We decorate the central part with rowan berries.

Attach the hearts to the wreath, hiding the loops under the leaves.

This wreath can become a decoration for your home. And since it was made with your own hands and labor and warmth were put into it, it will become a kind of amulet for your family.