Do-it-yourself lace lingerie: sewing a lace sconce, work sequence

Selection of lace for women's panties

Women's lace panties can be sewn from various materials:
Guipure is beautiful, but practically does not stretch.

Natural lace on a tulle basis . Ideal, but extremely expensive. Luxury underwear is made from it.

Elastic polyester lace .
Not suitable for daily wear due to its synthetic nature. Another option is to use a cotton gusset in such panties.

How to make an organizer for underwear?

It is inconvenient to store linen in the closet. It is constantly mixed and you have to waste time to get the right set. Organizers are suitable for organizing storage. They will ensure order in your wardrobe.

What you will need:

Shoe box;
Wrapping paper;
Scissors;
Pencil;
Glue;
Stationery knife;
Double-sided tape;
White paper.

Step-by-step instructions on how to make an organizer for underwear:

From the bottom of the box up, measure the desired height. Trim off the excess with a utility knife.
Cut out the partitions from the lid. The height should match the height of the future organizer.
Cover the edges of the partitions with white paper.
Glue tape to one side of the partition and glue wrapping paper onto it, wrapping it around the partition.
Make slits in the partitions up to the middle, having previously marked the required cell size.
Inserting the partitions one into the other, assemble all the parts. The design should fit easily into the box.
Cover the inside of the box with white paper.
Cover the outside with wrapping paper.
The top can be decorated with lace braid.

Watch the video that clearly shows all the steps:

Types of lace panties for women

There is a strict classification of women's panties, there are main types, as well as their varieties.

Thongs are especially loved by young people:

G-string - the waist is low, there is a small amount of fabric along the back at the top of the panties.

V-thong – repeats the shape of the letter “V”.

T-thongs - almost all the material is in the front part of the panties, along the back there are only strings forming the letter “T”.

C-string – no sides or fastening at the waist. They are held in place due to their shape and special dense inserts.

Classic briefs.
Bikini.
Brasiliano.

Tanga.
Shorts.

Maxi briefs.
Shapewear.

Trousers.

Pattern

To make the bralette pattern neat and correct, you need to take measurements. It is worth using the following parameters:

Distance from the middle of the shoulder to the bottom of the chest.
Chest circumference under the bust.
Chest circumference at its widest part.
Distance between nipples.

Taking the necessary measurements
Only after this can you cut and sew a product that will definitely fit your figure perfectly.

Working with pencil and compass

First you need to build a base, which will then be adjusted in size and shape. The sconce pattern begins with the construction of a regular circle, which is then transformed into a “triangle”:

Transfer onto paper the measurements that correspond to half the girth of the torso under the chest.
Measure half of the line - this is the center of the product, relative to which future “cups” will be placed.
Then the centers of the breasts are determined on the line. To do this, move the length of the distance between the nipples so that the cm are divided in half by the central mark. Mark the position of the nipples.
Transfer the measurement that determines the distance from the nipple to the edge of the chest. Do this on both sides of the marks.
From the central points of the nipples, draw perpendiculars upward relative to the first line.

Bra sketch
Important ! It is advisable to transfer all measurements onto paper using a compass, which is first applied to the measuring tape. This will help avoid huge errors.

After making these marks, you can begin sketching the shapes of the cups. They are usually triangles, but there may be other variations in shape.

Rounding pattern lines

The lace sconce pattern will look more attractive and neat if you make the lines more rounded. It is necessary to smooth out the lines of the triangles, and divide the previous blanks and process them separately. You can use the following scheme:

Working on the pattern

The resulting parts need to be further adjusted to size and the ideal pattern is almost ready.

Adjusting the pattern to size

You need to cut out all the parts of the patterns from paper. When the bralette pattern seems almost ready for further processing, you need to check again the size of each part. It is worth rechecking every measurement taken previously. Sometimes you even have to try on a paper base.

You might be interested in Features of clothing patterns for a full-length Paola Reina doll

Latest additions

Otherwise, basic measurements and measurements are enough to build a suitable item.

Cut on fabric

We place it on the material, taking into account the elasticity of the material:
We also take into account the lace edge, as a rule, we place it on the top of the panties, or along the edge of the sides on the buttocks.

We shallow it, do not forget the seam allowances of 0.5 - 0.7 cm. If your material frays a lot, make a slightly larger allowance.

Equipment, stitches and seams

Patterning a lace bra is not the beginning of making a garment. It is advisable to immediately select the necessary equipment, set up the sewing machine and decide on seams and stitches. A few recommendations:

Before work, be sure to check the overlock settings on the lace from which the item will be made.
When using a regular needle when sewing lace and elastic, the machine may skip stitches. It is recommended to immediately insert the needle for knitwear.
The tails from the overlock seam should be hidden under the stitching, pulling it through with a special hook, and the remaining threads should be carefully trimmed.
According to sewing technology, only an overlocker is enough to join parts. But it is advisable to sew the allowance along the face with a machine stitch, slightly stretching the part during the sewing process so that the stitching retains its elasticity.
Elastic tape should be basted first. This is necessary in order, firstly, to stitch it evenly, and secondly, to check whether its tension corresponds to the required volume under the bust.
To sew the elastic, a multi-pierced zigzag is used. This gives additional seam strength and elasticity.
In difficult, thick places, for example, when sewing a side seam where there is two layers of elastic, the overlocker may begin to “slip.” To help him, you need to pull the part a little away from you.

You may be interested in this: The correct order of sewing shoulder straps on a tunic

Preliminary machine settings

This is enough to understand not only how to sew a bra correctly, but also to make the piece of underwear beautiful and comfortable.

How to sew women's lace panties?

Stages of work:

We sew the edges of the gusset with an overlock stitch.
We fold a “sandwich” of two parts of the gusset and the front part of the panties so that the cut of the main piece is between the folded gusset allowances.

Secure with pins.
Let's grind.
We fold the panties, and now our task is to insert the cut of the back part between the gusset parts in the same way.

We fix it.
Let's grind.
We process the edges around the legs in a convenient way. If you have a lace edge there, then leave it as is.
Sew the side seams of the panties.
Fold the top edge.
Sew an elastic band to match the lace.
Let's try it on.

Accessories and materials

Sewing underwear itself is not a complicated process, but there are several nuances. They consist in the fact that the work is painstaking and requires the needlewoman to be careful and attentive. The pattern can be taken either ready-made or purchased, or invented independently. Many options can be found freely available on the Internet if you can’t build it yourself.

The sewing process involves the use of additional accessories

Sewing tools, including threads, needles and other items, must also be selected carefully. Needles should be selected for sewing stretch or knitwear with a number from 70 to 80. It is recommended to use threads that are strong but thin so that they are not felt by the body and can withstand washing in a washing machine.

You may be interested in: Choosing a sewing machine for heavy fabric and leather

Pattern diagram for a classic medium bra

It is advisable to process the edges with a zigzag seam, and sew the remaining parts with a simple machine seam or process them using an overlocker. The stitch length for such products is from 2 to 2.5 mm, and for finishing lines - 3 mm. It is also worth remembering that bartacks are made after each stitch. Small decorations are attached in the same way as buttons.

A set that makes a beautiful bra in the final process

For beginners, a guipure set is ideal, which is usually made without pits and foam pads. This lingerie looks elegant and romantic. The guipure itself is durable, wear-resistant and lightweight. It does not require additional processing around the edges, as it contains coupons.

Underwear pattern technology requires responsibility and accuracy

How to sew a lace bodice with your own hands in a step-by-step tutorial

In order to sew such a thin part of the wardrobe, you will need:

silk or lace;
a piece of elastic lace;
scissors;
sewing needles;
sewing machine or needle and thread;
clasps or hooks (can be used from an old bra).

This model rather resembles a swimsuit top. It is soft, pitted and without cups. Comfortable to wear and pleasant to the body, this model of underwear is suitable for those with small breasts.

As a sample, you can use the top from an old swimsuit. You can rip the bodice open and see how the seams look, and then transfer the pattern to the fabric. You can attach paper and trace the outlines, which can be used as a basis for constructing a pattern.

To begin with, two small triangles are cut out of fabric of such a size that they cover the nipple and breast around it. The size of the triangle is chosen independently; instead of fabric, lace of a contrasting color is also used.

Two strips are cut out of a ribbon of elastic lace (it should not be too tight and look like a bandage), one for each cup. The corners are cut at an angle of approximately 30 degrees and sewn together with a zigzag seam.

A ribbon is cut, the length of which is equal to the circumference under the chest.

The resulting triangles, trimmed with lace, are placed on a piece of tape so that the centers of the triangles fall on the nipple. At this stage, you can’t rush; you need to carefully measure and sweep away the parts.

When the measurements are taken, the tape, hooks, fasteners, and straps for the bodice are sewn together.

If desired, you can make straps with a cross on the neck; for this, their length should be much longer.

Construction of a pattern.

A well-constructed pattern is the guarantee that the bodice will fit perfectly. In order to draw a pattern correctly, it is necessary to take correct measurements.

To determine the size of the cups that will fit on the chest, two dimensional characteristics are required. The first, and the most important, is the girth under the chest. This measurement is taken directly under the base of the breast. This size is the universal European standard, which is taken into account when designing and labeling underwear.

The second size feature, no less important, is chest girth. To take this size, the centimeter is passed horizontally around the body along the most protruding points of the chest. It is worth noting that the centimeter should not sag or be too tight. In addition, its parallelism to the floor is very important.

It is the difference between these two sizes that determines your bra cup size:

12 cm – 14 cm = size A;
14cm – 16cm = size B;
16cm – 18cm = size C;
18 cm – 20 cm = size D.

Lace sconce.
A lace bra is one of the most sought-after and intimate items in a woman’s wardrobe. Bra is a translucent light lace that does not support the breasts or give them shape, but only hides the skin.

To sew a classic bra, you need to use a standard pattern, small changes in the shape of which will help fit the cup onto any chest shape.

It is very convenient to use existing linen to create patterns. To do this, a sheet of soft paper is applied to a bra that fits well and is comfortable in all respects and traced along the seams. It is very important to follow the directions of the seams, then the underwear will have a comfortable shape. When the parts of the bodice are ready and drawn, you need to decide how to sew them together. There are several options:

transfer the pattern to the fabric, making 5 mm allowances at the seams in such a way that the darts converge in the center, forming a triangle with the apex at the nipple;
cut out the parts of the sconce separately, using the same allowance, and then sew them together from the wrong side.

When the sewing method has been chosen, you can begin sewing the straps and elastic band under the chest. If desired, the sconce can be supplemented with decorative elements - ribbons, bows, rings for adjusting the length of the straps.

Each seamstress can choose the finishing method independently, inspired by modern fashion shows.

What is the advantage of lace underwear

masterpiece for yourself , we suggest you try to create a set with your own hands. Who knows, maybe your first experiment will be the start of a future career as a lingerie designer. But first, let’s figure out what the advantages of such a product are over others.

To create your set, you can choose the best lace. And you will be 100% confident in the quality of the material.
You can give free rein to your imagination and create something unique and inimitable. Or make an old dream come true and sew a copy of a fashion brand for a very reasonable price.
Sewing your own underwear makes it possible to take into account all the features of your figure, which means that such a set will fit you perfectly.

Well, are you convinced?
A do-it-yourself set of underwear is not only a cost-saver, but also an opportunity to unleash your creative potential. Above all else, luxurious lace lingerie transforms a woman. Wearing such a handmade set, a woman will always feel sensual and sexy.

Shall we start the master class?

What measurements are needed for men's briefs?

To sew men's family briefs, you need to think through the entire construction of the pattern. The product should be comfortable and hygienic. Usually for men's underwear the base is chintz. But you can sew a good and comfortable thing to wear only after taking certain measurements:

Half waist circumference (ST).
Half-circumference of the hips, namely at the widest point of the buttocks (SB).
Thigh circumference at the highest point.

Pattern option with parameters for men
These measurements are suitable for sewing family shorts or boxers, as well as swimming trunks. You just need to take into account the features of the model and, if necessary, take additional measurements.

Important! To prevent the finished product from being too tight, allowances for a loose fit are used when creating patterns. Usually + 5 cm allowance for each measurement is enough.

After taking measurements, you can determine the size of the product itself. You can also create a pattern taking into account all the features of the figure.