Wire Christmas tree: the simplest models
In the simplest case, to create such an original Christmas tree, in addition to the wire itself, you only need garlands, a crown, tape and scissors. The idea is very simple:
We take a fairly strong wire and bend it into a spiral, constantly reducing the width of each subsequent turn. In this case, the lower turn should have the shape of a complete circle - you will need to fasten the ends of the thick wire with a rope or thinner wire.
When we reach the last tier, leave the tip of the wire pointing upward (it should be located exactly in the center) - this will be the top of the head.
Now let's align the wire at all ends. It is necessary to ensure that all the contours are smooth, and the first turn is also flat - the structure must stand confidently on the floor, table or any other surface.
We fasten the garland along the turns using transparent tape. The pieces of tape should be small so that they are invisible.
We put on the crown. You can hang other toys by hooking them onto light bulbs.
So we got such a simple and at the same time creative Christmas tree. Using this principle, you can make a New Year's beauty of any size - from very small (desktop version) to literally huge (for an apartment or office).
You can see the entire manufacturing process in practice here. As a matter of fact, the described principle is basic - with its help you can make any Christmas tree from wire.
To some, such a model will seem too “naked” and a bit empty. This deficiency can be corrected in 5 minutes. To do this, just attach tinsel along the coils, and also hang balls and other New Year's toys.
The wire can also be threaded in another pattern - for example, in the form of a coil, like in the bathroom.
It is also decorated with tinsel, garlands, and toys. If you make it small, you will get a Christmas tree toy, and if it is large, you can mount it on the wall and decorate it to your liking.
You can also make a Christmas tree from two turns of wire, which will go in opposite directions - one twists to the right, the other to the left. This is a very interesting option, since such a Christmas tree looks symmetrical and certainly does not look “naked.”
DIY miniature wire Christmas tree for your apartment or office
This craft option is perfect as a toy for a large, so to speak, main tree in an apartment or office. The principle of its manufacture is slightly different.
First, we take the main wire and make an outline out of it, and don’t forget to form a small loop on top for hanging. Then we take smaller wire (preferably light shades) and put on small beads, seed beads and other decorative elements. And then we fill the internal space in the contour with coils, periodically attaching it to the base.
Using the same principle, you can make with your own hands not only a Christmas tree from wire, but also any other toy in general - the same star, a ball (both flat and three-dimensional), an icicle, a cone, a snowman: there is limitless scope for imagination. And if you decorate it with a small LED garland, then the craft can be used as a desktop souvenir at home or at work.
But how great these toys look on the New Year's beauty.
Christmas tree made of ribbons
Making a Christmas tree from ribbons is easier and faster than other methods. For this you will need:
The main thing is this ribbon, one and a half centimeters wide, then large beads, thread and needle.
There are not many stages as such, but each one is necessary: the first is to thread the thread into the bead, then the whole process is alternating the ribbon with the remaining beads, this is done layer by layer, the width of the first is +- 6 centimeters.
Drawing master class: 95 photo and video training lessons for beginners and an overview of the most popular techniquesMaster class on postcards - 100 photos and videos of options for making beautiful postcard models with your own hands
- Master class on decoupage - 70 photo ideas for using decoupage with instructions for beginners and expert recommendations
The “higher,” the smaller the step span to obtain the shape of a Christmas tree. Thus, we got a beautiful wall tree.
Christmas tree with curls made of aluminum wire
And this is a small masterpiece that will perfectly decorate a large Christmas tree in an apartment or at work. To make such a Christmas tree, it is better to take aluminum wire (it has a pleasant silver tint) so that the toy stands out brightly against the contrast of the pine needles (artificial or natural).
We will act like this:
- First we make 4 identical turns. Both ends of them end with a pattern: a large and a small curl.
- Now we will make 4 more of the same parts, but smaller in size (about 2 times).
- We connect all the patterns together using thinner white or light gray wire.
- Decorate with small toys and tinsel. Or you can just hang it on a large Christmas tree and leave it as is.
Christmas craft made from chenille wire
And this wire is perfect for creating a Christmas tree with your own hands. It is fluffy, quite voluminous, multi-colored and bends easily - in a word, there are all the conditions for pleasant creativity.
You can make a model using the same schemes. Or make several blanks with the same spirals and connect them using regular wire.
Here is another option for making such a Christmas tree.
In general, you can achieve a fluffy Christmas tree in a variety of ways. For example, make it from fabric or even from pine cones. And if you want to make a perfectly fluffy tree, you can make a conical base out of cardboard, wrap it with wire, onto which you can attach a lot of tinsel, as well as garlands and New Year’s toys.
Photos of master classes on how to make a Christmas tree
Read here - Master class on snowmen - basic methods and step-by-step description of how to make a snowman figurine with your own hands (105 photos)
Did you like the article?
0
Glamorous wire Christmas tree “a la dress” for home and corporate events
This craft is perfect as a gift for lovely ladies. To make it, we will need the wire itself, as well as pink ribbon, a glue gun and organza ribbon (translucent).
We proceed like this:
First, wrap the spiral with a regular pink ribbon. It also comes in a tight spiral and, if necessary, is additionally fastened with a glue gun. This is a rather painstaking process, but the result is definitely worth it.
We roll the wire into a cone in a spiral - this is what the workpiece turns out to be, and this is what it looks like up close. Already interesting.
Now we take a satin ribbon and organza; we measure out the same length, which should be 2 times greater than the length of the wire. A thin ribbon is placed exactly in the middle of the organza and stitched.
Gradually the base gradually tightens.
And this is what happens as a result.
We also glue this lena onto the base using a gun.
Instead of the top of the head, you can attach a bow - it is more than appropriate here. And we get such a glamorous beauty.
Of course, you can take other colors as a basis - for example, the classic version with any green shade is appropriate. Additionally, you can decorate a wire Christmas tree with beads and other decorative elements, attach a garland, hang New Year's toys - again, let's trust our imagination and sense of beauty.
These crafts are approximately 15-20 cm in height. An excellent option for home or corporate events. You can also use these Christmas trees to decorate your holiday table. Just don’t forget to illuminate them with a small garland - then the effect will be simply magical.
Knitted Christmas tree: how to make it yourself
Why not knit a strip and thread it onto a wire? This craft looks much more interesting, and most importantly, more comfortable.
Take a hook, a thick white thread and knit a strip of the given size. But first we will make a wire frame. Of course, you can make both a large and a small Christmas tree this way. However, a miniature product will look better, since the turns will be much closer to each other.
Now let’s dress up the New Year’s beauty with beads, beads or even small Christmas tree decorations. The crown can also be cut from fabric. If you make a loop, such a Christmas tree can again be hung on a large tree.
Or you can simply leave it on the table, illuminate it with garlands, surround it with tinsel, or even plant a doll next to it. But it’s better to have a pig, because it is the symbol of 2021.
Happy holiday!
How to make a tinsel tree with your own hands: from whatman paper, wire and sweets
A Christmas tree is a traditional attribute of a celebration; it is not always possible or desirable to use a real live spruce and its images from various materials are quite capable of replacing the original, creating a festive mood. There are several options for making a tinsel tree with your own hands. We will look below at how to make a tinsel Christmas tree with your own hands.
Christmas tree on the wall
Wall applique can be done quickly using a few push pins or a furniture stapler.
Having outlined the outline, simply attach the tinsel at the main points to the wall, so that the material sags just at the bends. Decorate the Christmas tree with a paper star and rain.
Thus, in 10 minutes the interior of the office office becomes more elegant and festive. The size and color of the tinsel are selected according to the location on the wall.
Volumetric application on the wall will require a little more time and materials. First you need to make a frame. The easiest way is to use regular cardboard, suitable in size, or assemble a base from several pieces of thick paper, fastened with fabric or the same paper using a stapler.
On the back of the craft you need to provide loops so that you can hang the Christmas tree anywhere you want. They secure the tinsel with threads, glue or a stapler, first around the perimeter of the frame, and then fill the space inside with it.
A voluminous Christmas tree on a rigid paper frame can support a small garland and several Christmas tree decorations.
Souvenir Christmas trees
How would you like a Christmas tree as a souvenir or decoration on your desktop? Volumetric tabletop trees are made on a cone-shaped frame made of whatman paper, wallpaper or thick paper.
Cut out a quarter or half of a circle with a radius equal to the height of the planned craft and twist it around the center, gluing the edges.
Next, the tinsel is secured with paper clips at the base of the cone and wound, secured with glue, to the very top, where it is fixed with thread or a paper clip. You can stick decorations made of paper, beads, and small Christmas tree decorations on the Christmas tree.
Candy tree is a great gift
You can also sweeten the souvenir tree by sticking various candies onto the frame cone in advance using tape. A candy tree will delight any child and adult with a sweet tooth. You can make such a gift in a few simple steps:
- Prepare the conical frame as shown in the pictures above.
- Secure the first row of tinsel with PVA glue or transparent tape.
- Use sticky tape to hang a garland of sweets.
4-7. Row by row, attach tinsel alternately with garlands of candies
- Secure the last row of tinsel with thread or a paper clip
You can choose the color of the wrappers and the size of the candies and create a completely original candy tree, decorating it with tinsel. The basis of such a Christmas tree can be a piece of rolled wire.
Using a needle and thread, tie the candies in rows and secure them to the wire. Please note that you will have to tie some candies inside the tree to give volume to the craft. The top rows of candies can simply be strung on a wire, having previously made holes in the candy wrappers with a needle, scissors or an awl.
The top of the wire must be covered with some kind of cap; it is best to secure a small decorative New Year's star with plasticine. Place multi-colored tinsel in several rows between the candies to give the tree additional splendor and shine.
It is advisable to place a Christmas tree made in this way on a stand so that the candies do not hang down.
wire frame
The version of a Christmas tree made of wire and tinsel will require a little skill and the presence of the wire itself of the required rigidity and diameter. A trunk made of thick, strong wire is attached to a stand made of wood or plywood. A thinner wire in the form of a funnel in a spiral is attached to it.
Building such a funnel is not difficult; you just need to carefully wrap the wire in a spiral on a solid base, for example, on a table, and then pull out the center to give it a voluminous conical shape. From long thick wire you can prepare a frame without a stand and a barrel, as shown in the figure.
Tinsel, toys and other decorations are attached to such a wire skeleton.
Christmas tree made of pine cones
Christmas trees made from natural materials have been very popular lately. It’s easy to make an original holiday gift with your own hands from fir and pine cones framed with tinsel.
Video compilation
- The principle of making such trees is similar to those described above; you can also get a detailed master class on making tinsel trees in the video selection below.
Source: https://potta.ru/sami-s-usami/kak-sdelat-elku-iz-mishury-svoimi-rukami-iz-vatmana-provoloki-i-konfet
