Postcard "shirt and tie"

DIY card-shirt for February 23rd: step-by-step master class

A DIY shirt postcard for February 23 will be a special gift for any man. To create an unusual gift, you don’t need to look for complex templates or expensive materials. Even a child can make such a colorful shirt for February 23rd from any available materials.

What is needed for making

To make the simplest version of a postcard-shirt for February 23, you need to prepare the following materials:

• double-sided colored or regular A4 office paper;
• a small piece of paper or cardboard 10x10 for making a tie;
• scissors, ruler, pencil;
• PVA glue (glue gun) for application;
• If necessary, you can use thread and a needle to attach buttons and other accessories.

If desired, the gift can be decorated with decorative elements:

• buttons;
• rhinestones;
• beads;
• satin ribbons.

Advice! To create an original present, you can also use other materials: velvet, textured cardboard, scrap paper, banknotes, fabric, whatman paper, even pieces of wallpaper.

How to make a shirt card for February 23rd with your own hands: step-by-step master class

In order to please your beloved man, dad, grandfather or colleague with a special gift, you don’t have to spend money on expensive gifts or give stamped cards. You can make an extraordinary gift for February 23rd with your own hands within 1 hour. With a minimum of effort and a little imagination, you can make a special gift from available materials and put a piece of your soul into it.

In origami technique - method one

A postcard for Defender of the Fatherland Day made using the origami technique seems complicated only at first glance. The process of making it is very exciting and simple.

detailed instructions for making an original gift step by step:

1. bend the prepared sheet in half lengthwise and open it.
2. Fold first the right and then the left part towards the center of the sheet (towards the fold line).
3. Fold the upper right corner as shown in the picture (step 3).
4. Fold the left corner in the same way.
5. turn the folded sheet over to the reverse side, bend the bottom edge of the workpiece by 8-10 mm.
6. turn the folded sheet over to the right side, fold the right corner as shown in the picture (step 6).
7. Fold the left corner in the same way to create a collar.
8. fold the workpiece in half crosswise, secure the lower edge under the collar.

Small buttons or stars can be attached to the shirt collar using glue or thread.

It turned out to be a neat shirt. to make a large postcard for February 23, you need to prepare a large rectangular sheet of paper or whatman paper.

To give a homemade shirt postcard a festive look, you need to decorate it with a neat tie, buttons, pockets, and a bow tie. You can also decorate the product with rhinestones and beads.

To make a tie, you can use the following simple scheme:

1. prepare a sheet of 10 x 10 cm, fold it diagonally.
2. Unfold the workpiece, bend the corners inward, as shown in the picture (step 2).
3. turn the leaf over again.
4. bend the corner of the resulting small triangle in the opposite direction, as shown in the picture (step 4).
5. Fold a trapezoid-like figure in half to the fold line.
6. turn the resulting workpiece over and bend the right and left parts towards the middle.
7. If desired, the finished tie can be decorated with stickers, drawings, and appliques.

important!
Postcards for February 23, made using the origami technique, always look impressive and unusual. A voluminous card-shirt can be attached as an appliqué to the base, placed in a small frame, or used separately, with money, tickets or a certificate inside, for example.

simple card-shirt - method two

Above is another option for making a shirt card for February 23rd with your own hands.

You can make an unusual and stylish gift with your own hands in just 5 minutes:

1. Fold a sheet of colored paper (preferably double-sided) or loose cardboard in half lengthwise and cut the sheet along the fold line.
2. bend the resulting workpiece in half again, as shown in the picture (step 2).
3. Departing 3 cm from the fold line, draw marks on both sides with a simple pencil, make 2 cuts 2-2.5 cm long.
4. bend the corners so that they form a collar.

The tie can be cut from any material or made using the origami technique. Buttons can be glued or sewn to the collar.

version with applique

applique is another simple option for making a holiday card for February 23rd with your own hands.

making such an unusual gift couldn’t be easier. To do this, you need to perform the following simple manipulations:

1. fold a rectangular piece of paper or thicker material crosswise.
2. Unfold the workpiece, and on the right side at the top, measure the middle and set it 3 cm down using a ruler.
3. Fold the corners outward to create a collar.
4. cut a tie to the size of the resulting shirt and glue it under the collar.
5. All you have to do is write your congratulations inside the card and the gift is ready.

To make a handmade card look more elegant and festive, you can cut a jacket or vest from a separate sheet, and also decorate it with pockets. a paper tie can be replaced with a bow tie made of satin ribbon, or a small handkerchief can be made from it.

shirt card ideas for February 23

A handmade postcard for Defender of the Fatherland Day will become even more interesting if you put your soul and a little imagination into it.

A laconic card made of colored cardboard in an official style.

Original shirt made using origami technique from banknotes.

• Elegant postcard-shirt made of scrap paper and textured cardboard.
• Volumetric postcard-shirt for February 23rd made of colored paper.
• 12
• Original postcard applique made of soft paper and cardboard.
• A touching card-shirt made using the origami technique with appliqué.

Volumetric work techniques

A beautiful handmade card for your beloved dad on February 23 can be voluminous. Think about how you or your child would like to add volume to the card - it could be quilling, voluminous appliqué, or even a card that becomes voluminous when unfolded.

I sometimes help children make cards using the scrapbooking technique, but much more I like to watch what they come up with themselves - so if the child is not averse to imagining, be sure to listen to his wishes.

This technique is the easiest way to make a three-dimensional card, especially since you don’t have to come up with any special plot, quilling in itself is very attractive, so it’s enough to simply depict the date of the holiday using this technique. However, if you want, you can schematically depict something .

To make greeting cards using the quilling technique, you will need to purchase or make a blank for the postcard, as well as strips of paper for quilling - you can buy them ready-made. You can choose colors to suit your taste - these can be classic khaki shades, symbolizing a military uniform, or any others that seem appropriate.

Paper cutting

Volumetric cards are always very impressive, and therefore it is not surprising that a child may want to make just such a card. A voluminous postcard for February 23 with your own hands can be quite complicated - if you chose this option, then it is better to watch the video tutorial.

Or you can use a sketch you made yourself - especially when you plan to make a folding card.

For example, you can draw on paper some plot that is not too difficult to cut out, and make a postcard that can be placed on a table or shelf. Another one is glued to the carved part - the back one, and you get a beautiful figured congratulation.

You can try to make a postcard with a three-dimensional structure in the middle - for example, cutting out a ship on the waves and gluing it together is not too difficult.

Or you can simply make a three-dimensional applique - the cut-out elements are glued not with glue, but with special adhesive pads and springs, and then the decorative elements will lag slightly behind the paper.

And a few more ideas for inspiration:

Now you know how to make a card that every father will be happy to receive!

Origami postcard “Shirt and tie”

Nowadays, handmade postcards are highly valued. And the person being congratulated will be especially pleased if you give him a postcard made by you yourself.

I present to your attention a postcard made using the origami technique “Shirt and tie”. This card is quite easy to make and all you need is colored paper, a sheet of cardboard and a little free time. If desired, you can add some decorative elements to such a card to suit your taste.

• Materials for the postcard:

1. a sheet of colored paper measuring 20x30 cm (I took black paper); 2. a square piece of paper measuring 9x9 cm (I took pink double-sided paper);3. sheet of cardboard;4. scissors, pencil;

5. PVA glue or thin double-sided tape.

1. Materials for decorating a postcard:

1. satin ribbon 0.6 cm olive color;2. decorative tape 1 cm;3. jute twine and metallic gold floss;4. a piece of white lace;5. a little satin ribbon 1 cm pink and green;

6. pink button and black thread.

• Work process
• Step 1: make the shirt

We take a sheet of double-sided colored paper measuring 20x30 cm. Crafts on paper with a pattern look very nice, but you can also take plain paper.

Fold the paper in half lengthwise. Let's expand.

Then we fold the paper lengthwise to the line in the middle, first on one side and then on the other side.

On the left side, we wrap the corner from the center to the left side, approximately 5 cm from the top. Symmetrically fold the right corner to the right side.

Turn the craft over. On the opposite side of the folded collar, fold forward a strip of paper 1 cm wide. Turn the craft over again.

We wrap the paper with the folded strip forward to the line in the middle, approximately 1-1.5 cm from the top (as indicated in the photo).

We fold the paper in the middle and insert the outer edge into the formed collar.

To hold the shirt tighter, you can glue it with double-sided tape or PVA glue.

Step 2: forming a tie

To make a tie, take a square sheet of paper measuring 9x9 cm. Using a pencil, draw a diagonal line on the square. Fold the corner on the left side forward to the line in the middle. Symmetrically fold the right corner to the line in the middle. Turn the craft over. Fold the top sharp corner forward, approximately 2 cm.

Fold the top corner again, up to the middle. A trapezoid-shaped figure should form at the top. We wrap the resulting trapezoid up to the middle. Turn the craft over. Fold the outer left corner to the line in the middle. We symmetrically wrap the outer right corner to the line in the middle.

The tie is ready! Glue the tie under the collar of the shirt.

Step 3: Glue the shirt into cardboard

We cut out a cardboard blank for the postcard according to the size of the shirt.

Glue the shirt and tie into a cardboard blank.

Step 4: Add Decorative Elements

Since the card looked a little boring, I decided to decorate it. Initially, I covered the black paper of the shirt with gold glitter. Then she folded the protruding corners of the shirt, on one side inside the card, on the other - on the wrong side of the card.

I took a pink button and sewed it with black thread. Then I glued the button to the bottom of the shirt. I formed a bow from olive ribbon and glued it to the bottom corner of the craft. I used gold glitter to draw a treble clef on the tie.

I tied the card on the side with jute twine along with metallic gold floss. I cut two small pieces from a decorative olive ribbon with silver sparkles and glued them to the tie.

I formed a rose from 1 cm pink and green satin ribbons.

How to make a rose, see here. I formed a boutonniere scarf from white lace and glued a rose into it. I glued the boutonniere to my shirt.

DIY origami postcard “Shirt and tie” is ready.

19

Suitable for MK:

Information

Visitors in the
Guests
cannot leave comments on this publication.

Source: https://rukodelie.usamodelkina.ru/7006-otkrytka-origami-rubashka-s-galstukom.html

DIY postcard shirt with tie and jacket

• In this master class I will tell you how to make a postcard with a shirt with a tie and a jacket with your own hands, as an addition to your gift on Men's Day on February 23rd.
• To make it we will need:
• • white cardboard measuring 20x20 cm; • blue cardboard measuring 10x10 cm; • red and white cardboard separately; • two buttons; • glue gun; • ruler; • sharp scissors;
• • pencil.

Preparing the base for the postcard. The main part and the shirt will be made of white cardboard, and the jacket will be made of blue cardboard.

We cut out a strip measuring 2.5x7 cm from white cardboard and draw lines, retreating from the edge as indicated in the diagram. This will be the shirt collar.

Now our task is to make a neat fold when forming the collar. Therefore, we press along the drawn lines with the back of the scissors. We bend the side parts towards ourselves.

On the back side of the blue cardboard, which is intended for the jacket, we also draw lines.

We cut the middle line, and along the two oblique lines we also draw with scissors and bend them. Please note that if your cardboard has a front side, then the jacket collar should look directly at it.

We cut out a tie from red cardboard, having first made a drawing.

Now we glue the tie onto the inside of the collar, fixing it where the corners of the two sides of the white cardboard touch. That is, the tie should not interfere with them and will be hidden inside.

We glue only the tie in the middle of the white cardboard blank, placing the collar flush over the top edge. It turns out that the corners of the collar should hang over the cardboard.

We glue a cardboard jacket on top and decorate it with two buttons.

Source: https://do-crafts.ru/otkrytka-rubashka-s-galstukom-i-pidzhakom-svoimi-rukami/

Postcard-suit

What do you need

• scissors;
• blue, white and red paper;
• ruler;
• pencil;
• patterned paper;
• glue;
• 3 buttons.

How to do

Cut a rectangle measuring 31 x 18 cm from blue paper. Draw lines on the two narrow sides at a distance of 8 cm from the edges of the sheet. Fold the paper along the marked lines. You will get a jacket.

Cut a rectangle measuring 34 x 14 cm from white paper and fold it in half crosswise. This will be the shirt for the suit. Insert it into the jacket with the fold down and glue the patterned paper on top.

For the collar, cut out a piece measuring 11 × 5 cm from white paper. Draw a line on the long side, 1 cm from the edge, and bend the piece to it. Cut off the top as shown in the video. Glue the remaining part on the collar to the top of the shirt, and attach it to the jacket. The shirt sheet should open downwards. All the details are in the video.

Close the jacket and make lapels by folding the paper diagonally at the top. Direct the ends of the white strip towards each other and form a collar. Cut a square out of red paper and make a tie as shown in the video. Glue it to your shirt.

From above, run a little scissors along the ends of the shirt so that they become semicircular. Cut two small long rectangles from blue paper. Twist them slightly and glue them to the bottom of the jacket on both sides. These are pockets. Attach buttons and a small handkerchief made of red paper. Sign the card on the inside of the shirt.

The design allows for variations. For example, you can add a vest and bow tie:

Or make a retractable shirt instead of an opening one:

Postcards for men for February 23

You need to congratulate your beloved men, grandfathers and fathers on Defender of the Fatherland Day in a special way. A handmade postcard will perfectly express love and respect. Some of them will require a mother’s painstaking work, others can be made even by a child. Choose according to your taste!

A postcard in the form of a men's suit, shirt, tie is a classic option that is suitable for congratulating the father of the family not only on February 23, but also on his birthday and any other holiday.

You can make a complicated card with many details that your imagination suggests. Or you can limit yourself to a simple scheme that children can handle quite well under the guidance of an adult. So, let’s stock up on colored paper and get to work!

You can put a congratulation inside the card on a separate sheet, or write it on the card itself.

A shirt made using the origami technique can be glued onto a regular postcard.

The simplest option for making a shirt postcard: make cuts on the sides and fold the edges of the “collar” towards the middle.

It is somewhat more difficult to make a postcard in the shape of a man's jacket. Below is a diagram of how to fold the paper.

Another folding pattern - this time you will end up with a shirt-shaped envelope. You can put your own baked cookies inside.

A real man looks great in a tie. Here is a diagram for folding a tie from colored paper.

• The tie can be secured under the collar of a paper shirt.

The green shirt makes one think of a military uniform. After all, the holiday is dedicated to the Defender of the Fatherland!

The symbolism of the holiday on February 23 suggests a military theme. Therefore, stars, ribbons, weapons and military equipment would be appropriate. Khaki color and colorful camouflage will complete the look.

1. With the help of the proposed scan it will be easier to make this spectacular postcard.

Postcards-shirts for February 23 – postcard shirt

The most accessible homemade gift for a child on Defender of the Fatherland Day to his beloved father or grandfather remains a postcard. This master class on making postcards-shirts will help you make this gift original, and at the same time give your child room for creativity in its design.

Paper, scissors, a little glue – that’s probably all you and your baby will need to make a unique themed gift and please your loved ones.

Origami postcard

Making such a postcard is not difficult, the main thing is to choose a sufficiently large and thin sheet of paper for it, since it will shrink many times during the process.

This card is essentially an envelope in which you can put a note of congratulations or a small gift (like movie tickets). You can decorate the finished craft with a tie or bow tie, pockets or buttons - in a word, make the shirt even more like a real one.

Cardboard postcard

Similar postcards-shirts can be made even simpler - from cardboard:

Postcard jacket

And this postcard-shirt is also complemented by a jacket:

Postcard for fisherman

You can make such a postcard with your own hands for February 23rd for those dads and grandfathers who are passionate about fishing:

There are many options for implementing this idea: it can be a flat or three-dimensional card, decorated with appliqués, drawings or sewn buttons - this is where a child’s imagination can really unfold!

Let these simple crafts not only give your child the pleasure of making them, but also help him please his loved ones, as well as understand the importance of such a holiday as Defender of the Fatherland Day! Happy upcoming February 23rd!

Source: https://www.BabyBlog.ru/community/post/fiesta/1707883

Postcard for February 23rd in the form of a shirt and tie » DIY Design & Decor

Postcard for February 23rd in the form of a shirt and tie

• For those who have not yet decided how they will congratulate a man on Defender of the Fatherland Day - the process of creating a cheerful decoration for a postcard in the shape of a shirt and tie (origami technique).
• To create a shirt with a tie you will need:
• — double-sided colored paper (two colors);
• - scissors, glue.
• Postcard for February 23rd in the form of a shirt and tie step by step:

Initially, you need to select material to create a postcard. In addition to the paper from the list of required materials, you can use single-sided paper with a pattern or, for example, bright colored foil.

A shirt will be made from paper of one color, and a tie from the second. Take a sheet of colored paper and cut out a rectangle from it, half the width of the length (photo 1). In this case, the dimensions of the workpiece are 22 by 11 cm (the dimensions of the finished shirt for the postcard will be 9.7 cm by 5.6 cm).

Fold this rectangle of colored paper in half along the long side (photo 2). After that, each half needs to be folded one more time, with the edge of the paper facing the first fold (photo 3). Unfold the sheet as in photo 4.

Next, the sheet needs to be turned over so that it faces up (in this case, the paper is double-sided and has the same color on both sides). Make sleeves for your future shirt.

To do this, bend the corners to the fold line in the middle, as in photo 5. Then straighten the corners again (photo 6). Turn the sheet face down. Fold the corners of the paper towards the newly formed fold lines (photo 7).

Next, the top of the workpiece needs to be bent, as in photo 8, along the line of intersection of small bent corners.

As a result, you should get a workpiece, as in photo 9. Next, bend two ribs along the existing fold lines (photo 10). Hold the connected “ribs” with one hand and straighten the top of the sheet with the other hand, as in photo 11. There is no need to straighten the small inner corners. Fold their top along the fold line (photo 12-13).

Turn the sheet over to the other side. You will receive sleeves (photo 14). Now make the collar. To do this, turn the shirt upside down and fold the free tip of the sheet onto the “face” of the shirt. The length of this bend should be equal to 1/2 the length of the sleeve. Here the sleeve size is 1.9 cm, the fold for the collar = 1 cm (photo 15). Turn the shirt over to the other side (photo 16).

Fold each side as in photo 17. This is how you form the collar (photo 18-19). Then fold the sheet so that the edge with the sleeves tucks under the collar (photo 20-21).

Flatten the bottom edge of the shirt (photo 22). Can be secured with glue (at your discretion). So you have a finished shirt base. Now start creating the tie.

Cut a square (with a side of 5 cm) from colored paper of a different shade (photo 23.1). As a result, the tie turned out to be 4.7 centimeters long (photo 23.2). Fold the square in half until you get a diamond shape with a longitudinal fold (photo 24.

1) Turn the sheet over so that the fold is on the inside. Each corner must be bent, as in photo 24.2.

Fold the sheet onto its “face” so (for convenience, it is advisable to turn the diamond upside down) so that the corner falls on the inside of the folded edges. (photo 25.2).

Fold the edge of the corner (approximately 1/3 of the entire folded sheet) (photo 26.1). The next bend is at the tip of the small corner (photo 26.2). Turn the inside side over and fold the two edges so that their edges meet at the center line of the rhombus fold (Photo 27). Attach it to the shirt by tucking a small corner of the tie inside (photo 28).

Use glue to stop the tie from bristling. But you also don’t have to use glue, but be sure to put the shirt under a press for a while (photo 29). When using plain colored paper, you can decorate the shirt with stickers of various shapes (stars here) (photo 30).

Postcard "shirt and tie"

A postcard in the shape of a shirt with a tie made of paper will be an excellent gift for dad, grandfather, brother, husband, boyfriend, godfather, uncle, nephew, father-in-law, boss, colleague, friend... A three-dimensional postcard with a 3D effect in the shape of a shirt with a tie made of paper looks very interesting, original and creative. The main value of such a postcard is that it is made by hand. In this article we will look at how to make a three-dimensional postcard with a 3D effect in the shape of a shirt with a tie from paper with your own hands.

Holiday style shirt and tie card

You will need: A4 colored cardboard, scissors, glue, markers, a simple pencil, decorative elements (buttons, glitter, threads).

Master Class

1. Make the base of the card from a piece of cardboard by folding it in half.
2. Draw a folded shirt on a piece of cardboard of a different color.
3. Cut out the shirt.
4. Glue the shirt onto the card.
5. Draw a tie or bow tie on cardboard and cut it out.
6. Glue a tie or bow tie to your shirt.
7. Write your wish and decorate it to your taste.

I recommend watching the video master class!

Formal shirt and tie card

You will need: A4 colored cardboard, scissors, ruler, glue, markers, a simple pencil, decorative elements (buttons, glitter, threads).

Master Class

1. Take a rectangle of cardboard and make a 2cm wide cut at the top for the collar.
2. Trim the excess edges of the strips on both sides.
3. Draw and cut out the tie on another piece of cardstock.
4. Glue the tie under the collar.
5. Write your wish and decorate it to your taste.

I recommend watching the video master class!

Postcard “shirt and tie” using origami technique

You will need: colored paper, markers, decorative elements (buttons, glitter, threads).

Master Class

1. Take a sheet of paper, fold it in half vertically, then straighten it out.
2. Fold towards the center of the edge.
3. Fold the top corners away from you to form a shirt collar.
4. Turn the collar down towards you.
5. Fold down the small strip at the top.
6. Fold the top corners towards you.
7. Make a tie or bow tie as shown in the image.
8. Write your wish and decorate it to your taste.

I recommend watching the video master class!

To create a large postcard, use half or a whole piece of whatman paper, and then follow the best version of the master class written above. Choose the most beautiful and favorite colors, decorate to your unique taste, because by giving a handmade card, you are giving a piece of yourself!

Loading…

Source: https://svoimirukamy.com/otkrytka-rubashka-s-galstukom.html

Postcard with a developing pattern

What do you need

• scissors;
• paper of two different colors;
• ruler;
• pencil;
• glue;
• thick film;
• black permanent marker;
• colored markers or felt-tip pens.

How to do

Cut out a rectangle measuring 19 x 14.5 cm from colored paper. Measure 1 cm on one narrow side and bend the sheet along this line. Then fold it in half crosswise. From the inside, on the side of the sheet where there is no bend, draw a smaller rectangle. Carefully cut out the resulting window.

Fold the card and trace it on a different color of paper. Add 0.5 cm on both long sides and cut out. Bend the piece along the marked lines. Lubricate narrow strips with glue and attach to the inside of the card. There is no need to glue the bottom part of the sheet. Then you will have a paper pocket.

Then glue the card together so that the holes are on both narrow sides. Cut out a rectangle measuring 15.5 x 8.8 cm from paper of the second color, and from paper of the first color - measuring 8.8 x 2 cm. Trace the larger shape on the film with a permanent marker and cut out.

Fold the small piece in half lengthwise. Glue the part up to the fold to the narrow side of the rectangle, put the film on top, and then attach the second part of the small part. Details are shown in the video.

Draw a tank, plane or something else thematic under the film with a pencil. You can write a congratulation, but the letters must be large. Color the picture or letters. Cover the image with film and trace along the outline with a permanent marker.

Insert the sheet with the design into the pocket of the card, and the film into the paper window. Only the outlines of the picture will be visible from the outside. But if you pull the part, a color pattern will appear. You can leave the card as is or sign it in the window.

DIY postcards for February 23: 23 ideas + 5 master classes

How can a child please dad on Defender of the Fatherland Day or another men's day (for example, International Men's Day or Father's Day)? The simplest and most touching way is to give a handmade card.

Handmade greeting cards are filled with notes of love and care, so they cannot be compared with store-bought counterparts.

Do you need original ideas on how to make a card for February 23? Read on. We have collected the most interesting master classes on creating beautiful congratulations for your dad, brother, grandfather or uncle.

Do-it-yourself voluminous postcards for February 23

“Like for dad”

What do you need :

• colored paper;
• sheet A4;
• markers;
• scissors;
• glue.

Instructions for a DIY postcard for February 23rd:

• Make a card template using A4 sheet and markers. Trace on colored paper .

• Cut out the handle and “try” it on the front of the card.

• Apply glue to the cut out palm and thumb.

• Glue the pen to the card.

• Bend your finger and secure its tip with glue.

By analogy, bend the remaining fingers, write a congratulation inside - the postcard is ready!

“3D cut-ka”

To work, prepare :

• cardboard (white, colored);
• scissors / stationery knife;
• glue.

Step-by-step master class of postcards from February 23 with your own hands:

• Print a template with the wording or write the word yourself. Cut along solid lines.

• Fold the sheet in the places marked with dotted lines.

• Trim the piece with the text along the edges to a size of 13 x 18 cm and glue it to a 13 x 25 cm base.

“Volume inscription”

Take:

• paper (colored, patterned);
• colored cardboard 14 x 11 cm;
• glue;
• ruler, pen, scissors;
• double sided tape;
• CD spiders.

Let's start creating:

• Handwrite or print a template with the word “dad” on 2 sheets: color and with a picture. Please note: on patterned paper the letters should be slightly larger than on plain paper. Cut out the letters and glue them to each other.

• Attach to the back of the letters with double-sided tape.

• Glue a colored strip with grooved edges 5 cm wide in the middle of the product.

An easier way to make voluminous postcards for February 23rd with your own hands is to cut out the word “dad,” glue family photos to the back and place them on a stand made of paper clips.

“Shirt” - a beautiful DIY postcard for February 23

Option #1

Consumables : _

• shirt, tie template;
• PVA;
• scissors;
• paper (patterned, colored).

How to make a postcard for February 23:

• Print a template or draw a tie and shirt yourself.

• Don't forget to make slits for the collar.

• Fold the card in half.

• Make a tie template.

• Trace the tie onto decorative paper using a template and cut out along the outline.

• Glue the tie between the card slots.

• Fold the top corners to create a collar.

• Sign the craft with a felt-tip pen, but do-it-yourself postcards for February 23rd with applique look more original.

Option No. 2

You will need :

• paper (colored, patterned);
• colored cardboard 14 x 11 cm;
• glue;
• ruler, pen, scissors;
• double sided tape;
• CD spiders;

Let's get started:

• Draw on the back of the patterned paper .

• Cut out the tie and place it on construction paper folded in half; glue .

• Using two triangles, make a shirt collar and secure the parts with glue.

• Cut off any paper that extends beyond the border.

• Additionally , sew the tie on a sewing machine - this way your DIY postcards from February 23rd will look more voluminous and textured.

• Cut out from craft paper or cardboard . Make wavy edges.

• Write a message (for example, “You are Dad #1”)

• Attach the spiders to the note using double-sided tape. Cut the strip to the size of the card.

Such a gift can be proudly presented to dad on any men's day or given just like that, for no reason, as a sign of sincere admiration for the father.

With a little imagination, you can create many holiday cards in the “Shirt” style.

What other postcards for February 23rd can you make with your own hands, playing with office and men's accessories? For example, cards with multi-colored ties on a wire hanger look original.

hand drawings

If you are looking for a creative idea for a stylish present for Defender of the Fatherland Day, make a butterfly using the origami technique . This paper accessory can be used as a postcard or decoration for it.

For detailed instructions on how to fold a paper butterfly, watch the video:

3 ideas for a “snack”: original DIY postcards for February 23

What other child can make a greeting card for his beloved dad, grandfather, brother:

• in the form of a set with tools ;

• crafts decorated with a lush mustache ;

• cards with a soccer ball or dad's favorite movie character .

Whatever card the child chooses for Defender of the Fatherland Day, if it is made with his own hands, dad will be infinitely happy and grateful! Add your own touches to make the craft truly unique.

Source: https://wordofdecor.com/otkritki-na-23-fevralja-svoimi-rukami/

Carved postcard

What do you need

• sample;
• thin colored paper;
• scissors;
• thick colored paper;
• pencil;
• glue;
• felt-tip pen;
• ruler.

How to do

Print the template onto thin colored paper and cut out a rectangle. Trace it on a thick colored sheet and cut it out too.

YouTube channel Hand Made

Return to tissue paper. Cut the template along all the solid lines to create a design.

YouTube channel Hand Made

Fold thick paper in half and glue the prepared part to it. The ship will be on top, and a contrasting base will be visible through the sea and the anchor.

YouTube channel Hand Made

Print a small congratulatory inscription on colored paper, cut it out and glue it onto the card. Trace the letters with a felt-tip pen. Draw dotted lines along the contour of the glued element and the postcard itself, simulating stitches. Sign the composition from the inside.

YouTube channel Hand Made