DIY crafts from light bulbs for kindergarten, school, for the New Year: master class, photo. How to make a New Year's, Christmas tree, snowman, penguin, Santa Claus and Santa from an old burnt out light bulb

A completely useless thing at first glance - a burnt-out incandescent lamp can be turned into an exclusive work that reflects the creative position of the author.

Unrealized creative ideas can be brought to life by making original crafts from burnt out light bulbs with your own hands. By involving children in this activity, you not only instill in them work skills, but also make the family even more friendly and united.

The significance of the holiday increases significantly when children take part in its preparation. Crafts from old light bulbs made by children with their own hands contribute to the development of their creative abilities and teamwork skills.

For a child, a master class with parents on making crafts from light bulbs with their own hands is joint creativity, not hard and boring work, but a fun game and fun with their closest people.

A photo of children against the backdrop of hand-made light bulbs for a significant event will decorate a family album and allow you to preserve memories of this holiday for a long time.

Warning

When working with glass, you should strictly observe safety precautions: work only with gloves and carefully remove the fragments after finishing work.

Children who are too young should not be allowed to work with glass products and light bulb crafts.

How to make a snowman out of a light bulb: description, photo

To create a snowman from a light bulb you need a frosted light bulb, threads, fabric, acrylic paints, glue

IMPORTANT: You don’t need a lot of fabric – 15 cm is enough.

Operating procedure:

• are cut out of fabric .

These are the triangles needed for a light bulb snowman

• is constructed along their lower edge . It is done simply - the threads are removed from the bottom of the triangle.

Light bulb snowman hat fringe

• Next, the triangles are sewn together in the form of caps and decorated.

Beads, pompoms, rhinestones and even braids are suitable as decor for snowman caps.

• Now you need to make carrot noses , and it is advisable to apply dashes with acrylic paint.
• All that remains is to glue the caps and noses to the light bulbs and use paint to depict the faces.

IMPORTANT: You also need to remember about the loops with which the snowman will be hung on the Christmas tree.

You get such cute light bulb snowmen

You can make snowmen from light bulbs not hats, but scarves. Another example of a snowman from a lamp from scrap materials

Personalized snowman light bulbs

Miniature light bulb vase

For work you will need: a screwdriver, pliers or a pocket knife. Using these tools, it is necessary to remove all parts located inside the flask. When doing this, proceed with caution, otherwise the product may be damaged.

The lamp with the internal elements removed is a ready-to-use vase. Such vases can be hung on a wire or a stand can be made for them. Plants that do not need watering, moss, or succulents are placed inside.

The material for the stand can be cork or any other material suitable for fixing the product.

How to make flowers, a bouquet from a light bulb: description, photo

This original bouquet is a selection of flowers in a vacuum. It is noteworthy that with each shake the flowers change their position, which means that the bouquet can look different.

Creating such a miracle is simple:

• To begin with, you just need to fill the light bulb almost completely with distilled water.
• Then glycerin and flowers are added.
• screw the light bulb socket tightly - and the bouquet is ready!

Several options for unique bouquets in a lamp:

A wonderful bouquet in a light bulb in delicate pastel shades

Soft yellow and white tones of bouquets in lamps

A little spring at any time of the year thanks to the lamp bouquet

The bouquet in the lamp can be contrasting

Stunning turquoise bouquet in a lamp

Manufacturing stages

You need to fold 5 light bulbs so that they form a pentagon or other shape.

Mark the contact points with a felt-tip pen, and then apply glue to the marked places and glue the lamps together. Glue can be replaced with adhesive tape. Place a working lamp inside the resulting figure.

The easiest way to make a lamp

Around the burning lamp, hang several burnt ones on a thin chain, cord, fishing line or wire.

How to make a Snow Maiden from a light bulb: description, photo

The Snow Maiden can be created like Santa Claus from the previous master class.

Or you can paint the light bulb more artistically:

• For example, according to the following sketch:

Sketch of the Snow Maiden and Santa Claus for creating toys from light bulbs

• You can prepare a sketch on thin paper , and then transfer it to a pre-primed light bulb .
• Next comes the most artistic part of the work - coloring.

IMPORTANT: It is best, as in previous cases, to use acrylic paints.

Coloring the Snow Maiden light bulb This is how you can color the Snow Maiden light bulb

You can glue a little cotton wool to the Snow Maiden’s hat - this is fur

Toys and decorations for the New Year tree

The shape of incandescent lamps serves as an incentive to create Christmas tree decorations: heroes from fairy tales, penguins, various animals, snowmen and others. Lamps are painted with paints, covered with fabric or paper using decoupage technique.

Hats, mittens and scarves can be knitted or cut from a variety of fabrics or felt. Having awakened your imagination, you can surprise not only children with such crafts, but also all adults present at the New Year's party.

How to make a penguin out of a light bulb: description, photo

To create a penguin you need:

• Bulb
• Clay designed specifically for modeling. The fact is that such material can dry out and harden on its own after some time.
• Acrylic paints
• Cardboard

The operating procedure is as follows:

• A foundation is formed from clay , onto which the light bulb should be attached.

This is how the light bulb is attached to the foundation

• A circle with a hole is cut out of cardboard - through it the cardboard is put on the base.

Cardboard is placed on the base of a light bulb

• Then you need to prime with acrylic paint.

IMPORTANT: Everything is primed - both the light bulb itself and the clay, base, cardboard circle.

Light bulb penguin primer

• Next, the cardboard circle on both sides and are completely covered with paint .

Coloring a light bulb penguin hat

• All that remains is to paint the rest of the light bulb - to depict a penguin’s tailcoat, cover the tummy and muzzle with white paint again, and outline the eyes with a beak.
• The base can be decorated with snow motifs.

This is how a penguin can turn out from a light bulb

Decorative decorations

Using your creative imagination, fill the clear lamp bulb with soil, moss, small rocks, shells or twigs.

Such crafts are hung or mounted on a support, which is most easily made from thick copper wire. The stand also uses sticky silicone holders, sold in many stores.

How to make a Christmas tree out of a light bulb: description, photo

To create such a craft you need:

• Bulb
• CD
• Paper
• Scissors, glue
• Star, beads
• Threads

IMPORTANT: It is preferable to use wool threads.

Operating procedure:

• You need to to the widest part . It is preferable to use a special glue gun.
• Next, the same thread needs to be wound in a spiral until you can wrap the entire light bulb. Periodically, the light bulb will have to be flavored with glue.
• While the workpiece is drying , roll it out of paper .
• The roll is inserted into the hole of the disk.
• Next, the roll needs to be cut so that it consists of four parts - they will serve as a stand.

IMPORTANT: The whole part, located on the other side of the disk, will serve as a stump for the Christmas tree.

• placing the Christmas tree on this stump , gluing it.
• All that remains is to decorate the tree.

Christmas tree made from a light bulb

Oil candle

Remove all the parts through the hole drilled in the base, insert a cotton wick and fill the flask with oil.

Making a candle

Drill a hole in the base, get rid of the internal elements of the lamp, insert a cotton wick and fill the flask with melted paraffin. Then break the flask and clean the candle from fragments.

Various original crafts:

• Miniature plant in a lamp;
• In the same vase are plants that require little water (succulents, for example, cacti) or do not require watering at all (aerophytes);
• Various small objects in the flask, from gravel to coins. This easily accessible and stylish decor makes a big impression;
• Gifts in a light bulb: money, congratulations, messages, etc.;
• Spices, salt, miniature cookies in former light bulbs;
• Ladybugs from light bulbs in the garden;
• A miniature kerosene lamp made from a burnt-out lamp.

New Year's light bulb toy - snow globe

Quite a complex decor, but it is suitable for decorating a table or windows. With the correct design of the light bulb, it will delight you with the New Year's mood.

1. First remove the filament by pulling it out of the base.
2. Next, take a small Christmas tree, which you can buy in souvenir shops. Place her on a piece of cork. Insert the tree into the llama and place it in the desired position.
3. Fill the light bulb with glitter, make holes in the base and insert a ribbon through them so that you can hang the toy on the Christmas tree. Or you can install it on a special stand.

Benefits from inoperative LED lamps

DIY crafts from LED light bulbs:

• The LED lamp is wrapped in threads, possibly multi-colored, symbolizing eco-style;
• Non-working lamps painted in different colors can serve as decor together with working lamps;
• Floating decorations made from painted lamps in the nursery.

Joy is brought not only by the results, but also by the creative process itself. Get satisfaction and inspiration, create yourself and give the joy of creation to your children.

How to make Santa Claus out of a light bulb: description, photo

Even novice crafters can make Santa Claus out of a light bulb. To do this you need:

• Use a marker the character's face on the light bulb.
• Paint the face , and the rest of the light bulb with white
• Using acrylic paint in black and pink colors, the face is drawn in more detail.

IMPORTANT: You need to paint the base of the light bulb with red paint - this will be the header.

• The top of the cap is decorated with a pompom and a loop. An ordinary piece of cotton wool can serve as a pompom.

This is how Santa Claus is created from a light bulb

You can make a real hat for Santa Claus from a light bulb

Photos of DIY light bulb crafts

How to make a rooster out of a light bulb: description, photo

The procedure for making a rooster from a light bulb is as follows:

• First of all, you need to degrease the light bulb, otherwise the paint may not adhere well to it. Nail polish remover is perfect for this purpose.
• Then you can paint the light bulb with white acrylic paint and let it dry.

IMPORTANT: It is advisable to apply two coats of paint.

• Now you need to paint the cockerel with yellow paint . Here, too, it’s worth creating two layers.
• Now you can sketch out the outlines of the cockerel. To begin with, it is preferable to use a regular simple pencil, and then you can move on to a thin layer of black paint.
• Be sure to coat the workpiece with varnish.
• Since it is preferable to decorate the base, it is worth making, for example, a comb or a New Year's hat. For example, plasticine may be suitable.
• You need to insert a loop into the cap or comb .

IMPORTANT: If you want to paint a hat or comb, you should first coat the plasticine with flour - this way the paint will stick better.

• The cap or comb also needs to be varnished.

This is how you get a cockerel from a light bulb

How to make a minion out of a light bulb: description, photo

You can create such a toy as follows:

• First, the light bulb is degreased
• Then you need to prime it with white paint.
• Next comes yellow. You can apply it with a regular sponge. It is preferable to create two layers
• Next, the eyes

IMPORTANT: It is recommended not to leave a gap for the eyes when painting with yellow paint, but to paint the eyes in a separate step.

• Now the glasses and mouth are drawn.
• As for the overalls draw that too . Or you can cut out a pattern from paper, try it on felt , and then cut out the blank from felt. The suit is glued with glue.
• If you need to create a hairstyle , you can use ordinary woolen threads.

Light bulb mionion

How to prepare a light bulb for remodeling

Before starting the creative process, it is necessary to prepare the light source, namely: remove its internal contents. For this you will need:

1. Working surface. You can take a thick sheet of paper, cardboard or something else. They will act as a bedding for the glass that appears during disassembly of the light bulb.
2. Pliers.
3. Screwdriver.

Reference. Don't forget to wear thick gloves - they will protect your hands from cuts.

After this you can start disassembling:

1. First you need to find the contact - it is usually located at the bottom. Grasp the pin with pliers and begin to gently loosen it. Continue this manipulation until you hear the crunching sound of the wires breaking.
2. The second stage is contact extraction. Usually there is quite thick glass around the base, so the light bulb must be held firmly. Additionally, you may have to carefully chip away small pieces of glass around the base. When it is released, be sure to remove the contact.
3. Next, we proceed to clean the base from any remaining glass. Use a screwdriver to remove any pieces of glass remaining on the inside of the base.
4. Remove the leg, electrodes, holders. Then wipe the inside surface.

Using the resulting blank, you can create many original interior items.

Florarium

Of course, a lush bouquet of cut flowers will decorate any room. But even with the use of special means, it will not live long. Unusual florariums can be an excellent alternative:

1. Place a small amount of soil inside the flask. You can also add small pieces of bark and sand. Using tweezers, carefully place them inside the future florarium.
2. Use a syringe to water the prepared soil. This way you will avoid splashing.
3. Take the tweezers again and place the plant in the soil.

Reference. If you don't have the time or desire to care for a living plant, you can take an artificial composition instead.