All wings in Terraria

How to choose a form

Before starting work, you need to decide what the angel’s wings should be. You can make almost any product with your own hands. But whether it will serve faithfully depends on its owner and the intensity of use. So, products can come in a variety of sizes and shapes. In addition, you can use different materials. But they all have a different “lifespan”, so the nature of the party should be taken into account.

How to choose suitable wings:

• Size. When choosing a size, take into account the height and age of the angel. For a children's party you will need small wings, and for an adult party you can build real eagle fans. The size should also be taken into account so that the angel does not touch passers-by while dancing. It's unlikely that an angel would want to end the party plucked.
• Position. The wings can be folded or raised. It all depends on the wishes of their owner. For example, at a New Year's party, angels with folded wings look touching. And for a photo shoot of a baby or child under one year old, small wings spread out in a flapping motion are better suited.
• Form. When choosing a form, the only indicator is the master’s imagination. If you don’t have enough ideas, you can look through pictures on the Internet and choose the feathers you like.

Classic feathers and down

The most interesting option, despite numerous ideas, remains feather wings made from natural down. This product looks harmonious on an angel of any age and build. To build a product, you need to visit a craft store and purchase the necessary materials there.

For the craft you will need:

• Two sheets of thick A3 cardboard;
• Several sheets of white paper;
• Decorative or real feathers;
• Pooh;
• White napkins;
• Elastic band for fastening;
• Heat gun, PVA, scissors, pencil.

To make angel wings with your own hands, you need to select their shape and print the pattern on a printer. You can also draw one wing yourself and then repeat it symmetrically. When the pattern is ready, you need to attach it to the back of the future angel and figure out how the product will look. At the template preparation stage, the shape and span of the wings are adjusted.

Symmetrical wings are cut out of thick cardboard. The workpiece must be in the form of a single piece, so as not to fasten the individual parts together later. The blanks cut out of cardboard are pasted over with white paper. Again, apply the product to the back and mark where the harness will be attached. Glue an elastic band to the designated places and seal the attachment points with white paper. Trying on an aircraft. If you are comfortable in it, you can begin the main part of the work.

Templates and materials

Such a beautiful detail of the image of an angel can be made from all kinds of available materials. The base for them is most often made of cardboard. The cardboard is then decorated with materials that look like feathers. Elastic bands are attached to the back of the wings to make it easy to put on the shoulders.

Another base option is a rigid wire frame. It is bent into the desired shape and covered with elastic fabric. Then the base is also decorated.

By using your imagination, you can come up with an original decor for the base. The main thing is that the weight of such wings is not too heavy.

Templates can be simple in shape. The main emphasis is on the feathers themselves.

Or a multilayer openwork template is cut out, the shape of which looks like almost finished wings.

The most natural decoration is, of course, feathers. You can buy a boa and glue feathers from it to the template.

In feather pillows, you can choose light feathers, grease the template with glue and pour feathers onto it. They will stick well and quickly.

You can also ask people who keep pigeons, but they are unlikely to have the required number.

Therefore, they make imitation feathers from satin fabric, paper, tracing paper, cardboard, fabric ruffles, napkins and other available materials.

Related article: How to make a pony from “Friendship is Magic” from plasticine step by step with video

Paper or glitter wings

An excellent option for an angelic outfit would be a paper craft. Making angel wings out of paper with your own hands is very simple. True, this will take some time, but the result is worth it.

You will need the following materials:

• Cardboard;
• White paper;
• Glue gun;
• Rubber;
• Pencil;
• Scissors.

As a basis for the wings, you will need a paper blank on which the feathers will be attached. You can make it yourself without using a template, since the contours of the cardboard in the finished product will not be visible.

After cutting out a cardboard template, try on the wings and attach an elastic band to them. Next, they mask the place of its attachment and move on to the decor. To decorate the wings you will need paper feathers. They are drawn according to a template and cut out. You can also print the required number of blanks on a printer and save time.

To make the wings look airy, they are attached to the top edge. The bottom edge can be slightly curled using scissors.

To get a more original craft, milk tetrapacks are used to create the wings rather than ordinary paper. Cardboard bags covered inside with shiny paper will serve as durable and unusual decor. True, you won’t be able to print feathers on such paper, so you’ll have to draw them by hand.

Large wings with feathers

According to the instructions, you can learn how to make large angel wings with your own hands. The first step is to do the following:

1. 
   Take the wire and bend it to the shape of the wings.

   Read also:  GCD "Teremok" with applique elements
2. Cut out two wings from transparent paper and glue them in shape to the wire.
3. Cut 4 blanks from chintz.
4. Cover the workpiece with chintz and apply glue around the perimeter.
5. Carefully glue the feathers in one layer so that the wire is not visible.
6. Sort tail feathers by size.
7. They need to be secured from the bottom up and start, first of all, with the large ones.
8. To make the first row, lightly coat the tip of the feather with glue and secure it under the chintz.
9. Next, you need to glue the feathers along.
10. Make the next two rows of feathers in the same way, which are slightly smaller in size.
11. On the other hand, do everything in a similar way.
12. At the end of the process, glue 2 rows of the smallest feathers so that the ends are hidden.
13. In places where gaps are visible, glue down parts of the fluff boa and comb it out.

Feathers can be replaced with goose feathers, if possible, although the price will be a little more expensive.

Durable fabric crafts

You can make angel wings with your own hands in about an hour. But a simple craft will last no more than one matinee, since its quality will certainly suffer from the child’s active rest. In order for the product to serve more than once, you need to pay attention to more durable models. For example, wings made of fabric.

Lace or ribbons

You can make wings from lace or ribbons. To create a craft you will need:

• Wire;
• White fabric or lace;
• Threads, needles, scissors;
• Template paper;
• Rubber.

To begin with, as usual, you should decide on the size and shape of the wings. For the fabric version, hanging folded wings are suitable. A blank is made from paper and then cut out. The wings should be closed together using a strip of paper.

The wire is bent according to the shape of the paper blank, repeating all the bends of the template. The ends of the wire are twisted together and wrapped with adhesive tape so that sharp edges do not damage the finished product. You can immediately attach an elastic band to the wire frame and try on the product. The frame is covered with white fabric and secured around the entire perimeter.

The next step is preparing the fabric for decoration. Lace or thin white fabric is cut into strips of equal width. The size of the stripes depends on the size of the wings themselves. Their width is approximately 10−15 cm.

Fabric strips are attached to the base, starting from the bottom. Using several stitches, sew the strip onto the top edge, leaving the bottom one free. Place the parts one on top of the other, hiding the place where the previous one was attached with the next strip.

Making wings from isolon

Izolon is a type of building material that serves as a substrate for linoleum and laminate. The material is budget-friendly in terms of price and footage. Izolon is a translucent material, the design is light and airy.

You may be interested in Review of programs for creating cross stitch patterns

Required materials and tools:

• wire;
• isolon;
• scissors;
• glue gun;
• insulating tape;
• decorative elements.

Wings from isolon
Work procedure:

1. It is necessary to create a frame from wire and cover it with isolon. Carefully secure the edges using thread and a needle.
2. To attach the wings, you can use an elastic band or decorative ribbons.
3. Cut feathers from isolon. To create a natural effect, feathers can be of different sizes and shapes. The largest elements are attached to the bottom, the top feathers should be the smallest in size. The work is carried out with a glue gun.
4. The upper edge can be treated with decorative elements: boa, satin ribbon, rhinestones, natural feathers.

Attention! The most natural wings are made from down and feathers.

Handmade from disposable tableware

Even the most unusual materials can serve as the basis for angel wings. For example, disposable paper plates. Unused utensils left over from a picnic should not be thrown away.

Cardboard plates are the ideal material for paper wings. It’s interesting to make such a craft with your own hands, and creating it won’t take even an hour.

You will need the following materials:

• White cardboard plates;
• Hot glue;
• Scissors;
• Tape or rubber band for fastening.

One of the plates will serve as the basis for the craft. The rest of the dishes should be cut to form crescents. The plate halves are glued to the base starting from the top edge. Place the plates one on top of the other, imitating folded feathers.

These wings will be useful for a short performance in the theater or a small miniature at a school party. If you don’t want to make bulky feather wings for the sake of a one-minute performance, such a craft from plates will come in very handy.

Air tulle flight

Another way to make angel wings involves using tulle and... a hanger. To create a cherub costume you will need two wire clothes hangers, a piece of white tulle and thread.

Step-by-step master class:

• Hooks are cut off from hangers.
• The wire frame is unbent and wings are formed from it.
• The frame is applied to the tulle and outlined.
• The parts are covered with the resulting pieces of fabric, sewing their edges to the frame.
• Fasten the two halves together at the ends, securely fixing the wire. The joint can be sealed with adhesive tape.
• The rest of the tulle is cut into strips.
• The strips are sewn onto the fabric with several stitches, forming dense rows.
• Having filled the wing completely, shake the craft.

An angel costume is a classic for any New Year's party. And beautiful wings will allow their owner to become a real celebrity. You just need to be creative and be inspired.