Watch the master class online: Master class on weaving a “Silver” collar

Good afternoon, friends, necklace collars are an accessory that will decorate and instantly give a festive look to any dress, blouse or top. It seems at first glance that it is difficult to create such a miracle, but the collars of a necklace or necklace can be made quite easily with your own hands.
Your Zest today he will tell you how to make wonderful, luxurious collar necklaces with your own hands from beads, sequins, beads, rhinestones, chains. All work will require a little effort and patience, they do not require great skills, any novice needlewoman can handle it.

First, read the description of the work, look at the photos of the applied necklace collars (there are more than 50 options in the article) to decide which model is closest to you, suitable for decorating your favorite item in your wardrobe. By the way, such collars can be either applied or sewn to clothing after production.

Whichever option you choose from the proposed collars, I have no doubt that this accessory will take its rightful place in your collection. After all, what is made with your own hands is more expensive and valuable. Now let's move on to how to make a necklace collar with your own hands.

Collar necklace “Gems”

Consumables

To make your own “Gems” collar necklace - a bright, stylish and elegant clothing accessory, you will need the following supplies:

Thin dark felt
Multi-colored beads and beads
Nylon thread
Beading needle
Chalk

How to do

Draw a sketch of the future collar on paper and cut it out - this will be a template.
Secure it to felt. Using chalk, starting from the center of the collar, draw the offices of the future design. As you can see in the photo, it represents several semicircles.
Along the inner edge of the collar, first sew a row of beads, then a row of beads. Then sew beads along the outer edge.
Sew a row of beads along the contour of each semicircle. Next, embroider each semicircle with beads, starting from the center and ending with the beads according to your drawing (it may differ from the photo).
You can sew the finished collar of the necklace onto a blouse or simply wear it over it; to do this, sew ribbons or a hook to the ends, which will serve as a clasp for the collar.

Ideas for creativity

Using the same technique, you can choose and make a collar-necklace with the following interesting options.

Ethnic motives

Option 1

Option 2

Cold radiance

In this version of the collar, large rhinestones are used, which makes the product blinding with its light. For work, you can choose adhesive rhinestones on the outline, which can be drawn with a chalk pencil (as in this version in the photo), or buy rhinestones that have holes for sewing to the fabric.

Advice: if this is your first time working with rhinestones, it is better to buy sew-on necklaces for making a collar. If you make a mistake in the drawing, it will be easy to tear them off and redo the work.

Option 1

Option 2

This version of the collar necklace uses rhinestones of different colors, shapes and sizes.

How to make a detachable collar with your own hands?

Here, every needlewoman must decide for herself which method of creativity is closer to her. After all, a collar can be sewn, knitted, woven from beads, decorated with sequins, beads, etc.

Take out the remnants of fabric, old denim, lace, rhinestones from the bins, and ideas are already creeping into your head. Read on and choose “your” decoration option.

DIY collar patterns

Here are patterns for triple “composition” collars. They consist of two layers of fabric from which the collar is made, and a lining material that helps the product attach to clothing.

This collar cut is suitable for both women and men; it will successfully complement any item from your wardrobe. And in the end, such a stylish collar deserves to be a separate piece of jewelry.

Transfer the collar template to a sheet of cardboard or thick paper and cut out the future model.
It is advisable to measure the neck length in advance.
For accuracy, fold the fabric in half (the cuts should match), pin them along the shoulder seams, sides, and neckline.
Then measure the length of the neck of the women's dress with which the collar will be worn.
It is better if the neck length is half a centimeter or a centimeter longer than the size of the pattern on the basting sections.
If the length is less than planned, then you need to make a new pattern by moving the center of the collar down, thereby lengthening it.
Trace the pattern twice or fold the fabric in half. To do this, use a pencil, pen or pale marker.
The intended layout should not remain on the cut out parts; cut off the marks close to the edge.
Cut out the intended material with the necessary allowances. Cut out the second part of the collar without allowances. Now you have two equal parts for the top and bottom, you can start sewing.
Next, grind the details of the collar, that is, connect two pieces of fabric and turn it inside out.

When you are dealing with a collar that is cut out in one piece, keep in mind that after cutting out the allowances, you need to make cuts in the corners, as indicated in the figure. Otherwise, it simply cannot be turned right side out.

There is no need to rush to stitch the product: when such a collar is turned right side out, place a stitch connecting the collar with a wardrobe item (blouse, jacket, dress, etc.).

Below are patterns for a one-size-fits-all collar; its size will not and should not fit neatly along the lines of the neck of the garment.
Here are the most basic patterns for homemade detachable collars with allowances and fold lines.

DIY beaded collar: diagrams and photos of products

Making a collar from beads is quite difficult work, requiring painstaking work and perseverance. But a beaded product will turn even the most boring dress into a luxurious outfit. High-quality and beautiful things are expensive, and not every fashionista can afford them, but a beaded collar will add shine to the image and will look rich.

Here is a fairly simple collar pattern. It doesn’t matter what you string the beads on - fishing line or nylon thread, the main thing is not to tighten it. The collar should lie freely on the surface, and not “stand” on the neck.

The next collar will consist of beads and be held on a fabric base:

using a cardboard pattern, cut out two parts of the collar and the third from dublerin, which will be the base of the product;
sew all the details from the wrong side and turn them right side out;
attach ties from satin ribbons;
Start beading: in places where the beads or beads are larger, hook the stitches to the fabric backing of the collar. Thus, the beads will not hang chaotically, but will be harmoniously attached to the fabric.

Many patterns of beaded collars can be borrowed from the models on which beaded necklaces are woven. Instead of ties, attach special fasteners along the edges, which are mainly used to fasten bracelets and baubles.

Everything ingenious is simple. Even such extraordinary designs can look amazing, and even a novice needlewoman can master them.

DIY crochet collar

There is something vintage about knitted collars that gives them nobility and a special charm. Those representatives of the fair sex who are familiar with the basics of crochet can freely try to create something similar with their own hands.

"Lacy peacock tail"

And here is the pattern for knitting such an openwork collar.

Gothic collar

Collar "Lucien"

Collar "Ioannina"

Collar “Romantic”

DIY lace collar with photo ideas

If the width of the lace is less than the specified size, then the collar is made of two parts using a connecting seam. Fold both laces for narrow and wide frills and fasten the side sections by hand, stitch the braid to it with threads of the same color.

Fold the two collar pieces together, placing the top piece with the wrong side facing the right side of the bottom piece. Trim the edges and secure. If the idea is that the product should be attached to clothing and not removed on its own, then you can sew it into the neck of a blouse, dress, etc.

If the collar will be removable, then you need to trim the neck with cambric braid and sew a small button and loop on the inside.
You can make these lace collars yourself:

Collar made of beads, rhinestones and stones: how to make it at home?

Collar in the form of a necklace made of felt fabric and rhinestones with a chain

Stock up on the following materials:

Cut out two identical pieces of fabric - one from felt, the other from satin. Using glue, attach the rhinestones to the material, starting with the largest one, from which the design of the entire composition will proceed.

Glue on both edges of the chain as shown in the picture.

From the wrong side, glue the ribbons on both sides of the edges of the collar. At the end of the design, apply glue along the entire perimeter of the wrong side of the product and attach a satin scrap: this way the stages of work on the collar will not be visible and the ties will be better secured.

Now the update is ready, wait until the glue is completely dry before trying it on!

DIY fur collars

Making a fur collar is as easy as shelling pears. To do this, take a collar from your old coat or down jacket. Most often they are sewn removable. The collar itself is already ready; there is no need to cut, stitch or perform other sewing manipulations. You can decorate this collar in different ways:

sew braid or ribbons to its edges, which will then be tied into a bow;
pin its edges with a large, bright brooch;
come up with a knitted piece that will help the loose edges stay together;
connect the collar parts with a light ladies' scarf.

And you will get, for example, such cool collars:

DIY frill collar

At the time of its origin, the frill collar adorned men's toilets, and only after a long time was it borrowed by the opposite sex. This decoration will make even the most boring business outfit more romantic.

Instructions for sewing a detachable frill collar:

First, cut out the pattern; it will have a shell-like shape. The larger the pattern, the more magnificent the collar will be. Fold the fabric material in half, with right sides facing each other, and cut out the two components of the collar. Stretch the resulting shreds a little.

Sew both flaps along the inner edge, placing them right sides together. Turn the collar right side out and iron the seam. Make a zigzag stitch on the front side right along the seam of the collar - this will help it retain its shape better.

Elevate the product by decorating it with bright buttons. From the inside, attach two fasteners with pins, at the bottom and at the top.

It's so easy and quick to make a unique and beautiful thing.

DIY collar: video master classes

Source

Video: how to make a necklace with rhinestones

Emerald necklace

Stylish trio

The collar is made in the form of three semicircles, in the center of which there are three large rhinestones imitating huge diamonds.

Ruby flowers

To make this accessory, you will also need ready-made sequin flowers (they are white in the photo). And for the lock there is a hook with a chain. Although you can choose any lock to suit your taste, for example, in the form of ribbons.

Jaguar spots

Predatory prints are still in fashion, so a necklace made in this version will be very relevant.

Winter patterns

In this version of the collar, in addition to round beads, you will also need cutting (in the form of short tubes) and a thread of sewing rhinestones.

Collar with original clasp

This model of collar, embroidered with beads and rhinestones, deserves attention not only for the beauty of the patterns, but also for the original solution for making the fastener. It is made from the front, not the back, so the collar has a pattern that matches the size of the collar.

Weaving collars from beads and beads, with photos and videos.

We begin our journey into the fabulous and magical world of beadwork, which never ceases to fascinate with its splendor and diversity. Every person who masters this skill can easily weave both beaded flowers and trees, as well as jewelry.

Rings and brooches, necklaces and necklaces, bracelets and earrings make up an incomplete list of beaded jewelry. It is possible to make things like a crown, headband and collar. This lesson will cover how to make a beaded collar.

Beaded collar

We begin the master class by listing the necessary materials and tools:

large black beads (3 x 4 mm), 706 pieces;
black beads 6 x 4 mm, 40 pieces;
black beads 8 mm, 100 pieces;
large chain, 10 cm;
two rings of 5 mm;
clasp;
bead thread;
two bead needles;
lighter;
round nose pliers;
pliers;
nippers or scissors.

The collar consists of three parts. The first base, and two halves. For halves, 8 mm beads and 3 x 4 mm beads are used.

Take a meter of thread and thread both ends into needles. We string two beads and one bead onto the first needle, and 8 mm onto the second bead. Move all the details to the center. We take two beads and thread them with needles from different sides. These beads act as a plug for everyone else. We will get a figure where the top and bottom consist of two beads, on the sides there is one large bead (KB). This is an integral link in the chain. The length of the chain consists of twenty links.

For each needle we collect one of the CBs, and complete the new link with two small beads (MB), threaded with needles in different directions, and covering the next link.

As a result of weaving we get a chain. For a beautiful finish, we bring the thread to one side, make knots, and hide the beads in the holes. If you are weaving a collar on a fishing line, singe the ends.

Let's expand the chain to five KB horizontally. There is already 20 KB vertically. We take a thread one meter long and thread the ends into 2 needles. Let's pass the needle into the first CB from the side. We string two small ones and one large one onto the left thread, and then close the link with two MB. We thread the right thread into the next CB on the right, and string one large one onto the left one, and close the link with two beads. We are performing the second chain, but it shares the right bead with the first chain. We weave the second row, and proceed to weave the next one. We work until we get a width of five KB.

In the final row, place five beads on the left thread, and thread the fifth with needles on both sides. Then we pass the right thread into the KB on the right. We put four small ones on the left thread, and we thread the last one with needles from different sides. We continue to weave the entire row until the very end. One half of the collar is ready. Let's make two identical halves.

Making the base for the collar. It will require two meters of thread. We thread the edges of the thread into two needles, and string four beads onto one of them, pushing them along the thread. Then we put on a 6 x 4 mm bead, thread it through the other side with a second needle, and we get the first warp link. Then we thread two MB on each needle, and a large one, 6 x 4 mm in the middle. We perform the next links in the same way until we use 20 KB. Half of the warp is woven.

Now we will make the middle of the base. To do this, we type 1 MB for each needle, and two MB in the middle. This link is the middle of the base. If you want to make the neckline round, weave the collar on a fishing line. The neckline of the collar will be sharp if woven on a beaded thread. Let's finish the second half of the base and connect all three parts together.

To do this, take a meter of thread and put a MB on it. We thread the first needle into the KB halves, and the second needle into the two MB warps. We take one small one and thread it with needles from different sides. We draw the thread on the right into the CB halves, and the thread on the left into two small warps. So we connect the whole row. We do the same with our other half. The final phase of the work is to add the chain and lock using connecting rings.

Video: Sparkling beaded collar

Openwork beaded collar

Consider weaving an openwork beaded collar.

Craft materials:

Beads 4 x 3 mm, 449 pieces.
Beads No. 10, 25 grams.
“Droplets” 10 x 15mm, 14 pieces.
Beads 8 mm, 15 pieces.
Line with a diameter of 0.25mm.
Bead needles.
Scissors.

Choose the color of the consumables as desired. It depends on what kind of clothes you want to decorate with a collar.

Let's make the base of the collar. To do this, take two meters of fishing line, thread a needle into one end, and make a ring of seven beads at the other. To do this, we will thread them into a needle, move them to the very end, and tie the main line to the end. Following the diagram, we will collect 1 MB, large, and one bead. Let's thread a large bead in the opposite direction, tighten the fishing line, put three MB on it, and thread the needle into the third bead of the finished ring.

We string four beads and pass the needle to the third one from the place where the fishing line comes out. Then we string five beads and go through the third one from the top. Let's pick up four beads again, going into the 3rd one. There will always be four parts at the top.

We make a pendant from below, putting on MB and KB. We return to the large one, string three more smaller beads, and go through the third one from the top. Repeat until there are fifteen pendants. Only the base is ready for now.

Let's take one and a half or 2 meters of fishing line and embroider it with beads. Let's put one MB on the line. Then we put it on the base, in the first gap between the pendants, in the middle of them. Having put on two more beads, we tie the base of the fishing line to the tip and cut off the excess. The result is a cross made of beads, which we pass with a needle clockwise, and bring the thread down from the right bead. On this thread we collect 16 beads and 1 MB.

Move on to the next link, insert the needle into the middle bead, add two more, and form a cross. We will repeat the operation that we did in the first link. We get an arc that goes around a large hanging bead. We repeat this weaving until the end of the row. We continue to weave, stringing the pendant with a drop and a bead at the beginning of each row. Arcs of sixteen beads are located one below the other. The rows are completed with a drop and a bead. Each new row must begin one link further, and end it one link earlier than the previous one. This will give the collar a rounded shape. When the collar is ready, 14 droplet beads will be suspended at the bottom around the circumference of the collar.

We looked at the second master class, which discussed how to weave openwork beaded collars with your own hands using video materials. Such collars are elegant and can make any festive dress look elegant.

Video: Lesson on beading an openwork collar

vnitkah.ru

Collar necklace “Pearl”

This snow-white collar necklace will sparkle on your neck so that looking at you, they will say - all in pearls.

However, the collar can also be made of black pearls; this will not hurt to wear it with a contrasting color item.

Consumables

Thin, light-colored felt (if the collar is white, as in the first photo)
Large, medium and small pearl beads
White nylon thread
Beading needle
Hook clasp

How to do

Draw the future collar on paper, focusing on the photo.
Cut it out. You have a template. Attach it to felt and cut it out.
Then, starting at the outer edge of the felt piece, sew beads underneath the pearls. As you work, change the size of the beads from row to row.
Attach a hook as a clasp.

DIY beaded collar: useful tips

Stylish detachable collars came into fashion several years ago, but only this year they gained enormous popularity among women.

The new trend has literally conquered the catwalks and store shelves, and now every famous designer considers it his duty to include it in his collection.

From a component of business style, it has turned into something that attracts the attention of others, lifts the mood and adds brightness. Therefore, it is not surprising that the demand for them is growing.

DIY beaded collar: useful tips

From the history

It all started with Miu Miu, a line of youth clothing from the Italian fashion house Prada. It was these guys who made the proposal to wear the products separately from the rest.

The idea inspired the public so much that within a few months people with a variety of collars appeared on the streets.

This trend has not lost its leadership position to this day for the reason that it gives a breadth of choice and self-expression. The accessory itself is beautiful and unusual.

Alas, stores are not always able to satisfy the needs of capricious girls: they are confused by the price, shade, shape and many other nuances that do not allow them to make a purchase.

In order not to be left on the sidelines of fashion, you will have to buy threads, a glue gun, dissolve old beads and create a beautiful collar with your own hands.

Difficult, you say? Not at all! The detailed instructions given in this article will help you create a truly masterpiece.

DIY beaded collar: useful tips

Popular types and step-by-step instructions

The easiest way to get a fashionable item is to tear off a stand from an unnecessary shirt and sew beads onto it. You can complement it with chains, spikes, weaving, buttons, and stones, which will help you create something exclusive.

If you are not looking for easy ways, then pay attention to the list and master classes presented below.

Necklace

The product received this name for the simple reason that in appearance it represents this decoration. It will be an ideal addition to an evening outfit, because it looks luxurious and rich.

To make it you will need:

material that will serve as the basis of the necklace. It should come in three different sizes. For example, 5, 7 and 11 mm. However, you can take matter in a different format;
2 needles;
thread;
scotch;
manicure or regular scissors.

Working on a necklace includes several points:

Thread a meter-long thread into both sharp objects so that both ends are threaded into the ears and tied in knots.

On the first one we place 3 miniature beads, moving them to the middle.

We first put the next small piece on the second one, and then pull it through the first one. This way you will have a diamond made of several components.

We place 1 bead on both needles and repeat the third stage, so that in the end we get another geometric figure.

Tape the workpiece to your workbench to make it easier to continue. If you don't have the tool, skip this step.

Continue weaving diamonds in the above manner. At the end you will have the base. The final length depends on your needs and desires.

The next line is created by the middle components. It is attached with a new thread to the beginning of the row, and a transition is made in the middle, designed to divide the collet into two parts. For convenience, start weaving from half and carry it out according to the scheme described in the previous paragraphs. But remember that now each figure must be attached to the base.

The last stage is the placement of large components. Join the row with the second bead, which is in the middle of the second line.

After you finish making the accessory, sew it to the blouse or dress. Some girls wear similar attributes as an independent original element. If you want to add to their list, attach a chain or ribbon with a clasp.

DIY beaded collar: useful tips

Openwork

It turns out to be very gentle and romantic, so in most cases it is complemented with light chiffon or silk dresses.

List of what you need:

bag of beads No. 10 (25 grams);
beads 3x4 mm – 450 pcs., 8 mm – 15 pcs.;
scissors;
fishing line, 0.25 mm thick;
droplets – 14 pieces, size 14x10.

Choose the colors of the things you use yourself. It will depend directly on what you are going to decorate. If the collar becomes “independent”, it is better to use traditional universal colors: white and black.

Step-by-step instruction:

For the base, cut 2 meters of fishing line, thread one end into the eye, and form the other into a circle. To perform this action, we string 7 large components, move them “to the bottom” of the fishing line and connect it to the main part.

We place large and small parts + 1 bead. We thread the large bead in the opposite direction, tighten the thread and put 3 small units on it. We place beads on the needle and get a ring.

Next, we place 4 more pieces, thread the needle into the third one and make a pendant from the bottom. To do this, you need to string beads and place the needle in the third bead from the top. The total number of such pendants is fifteen. Once you have made them, the attribute base will be ready.

Put a small bead on the two-meter one, connect it to the base between the resulting pendants. Then we string 2 more components, tie the ends, remove the free centimeters with matches or a lighter.

The resulting cross should be threaded with a needle, the thread should be brought to the bottom, and 16 pieces of beads + a miniature bead should be strung.

The next step is to thread a needle into the middle of the link, arrange two large beads, and form a cross to form an arc. We repeat the described steps until the row ends, from the next line we repeat all movements. The formed arcs should be located one above the other. Finish the rows with a drop. There should be 7 of them in total.

The resulting necklace will become a universal decoration that can add zest to any look, both evening and business.

DIY beaded collar: useful tips

Pearl accessory

This attribute goes perfectly with high heels, a beautiful floor-length dress and an elegant hairstyle. It adds femininity, sophistication, and tenderness to the fair sex. Unlike previous options, here you won't need threads and won't have to sew.

To create an accessory from pearls, we suggest preparing:

cardboard or felt;
ribbons;
artificial pearls;
glue gun

The work process is very easy and does not take much time.

To begin, prepare a pattern of any shape, depending on your wishes. Draw it on a landscape sheet, cut it out, transfer it to cardboard or felt.

Now let's start decorating. The result will please you if you take this stage seriously from the very beginning and arrange pearls and other desired elements on the material in advance in a symmetrical pattern. Using a glue gun, attach everything to the cardboard, arranging it in the desired order and filling the entire surface with it.

If you like to sew or embroider, you can complement the product with multi-colored stitches along the edge and between the pearls.

The last step is to create the clasp. The easiest option is to use a chain with a carabiner. But if you want the decoration to look more delicate and airy, use satin ribbons. Carefully make holes, stepping back a couple of centimeters from the edge, thread the ties and secure them with hot glue. Ready!

DIY beaded collar: useful tips

These things are easy and simple to do with your own hands. It is enough to have the desire and the necessary preparations. You can wear them with different outfits. They look equally impressive with any clothing: shirt, dress, blouse.

You may also be interested in:How to make epoxy resinHow to make a doll from polymer clay?Kanzashi for beginners from tape

Video - how to make the base for a collar and necklace

Ideas for creativity

Charm

Tenderness

The work uses cotton lace fabric, which is sewn on top of thin blue felt.

Pearl daisies

Pearl placer

Starry sky

Lilac Rhapsody

Royally

Option 1

Option 2

Collar necklace with pearl clasp

The clasp on this necklace collar is beautifully made in the form of a string of mother-of-pearl-lilac pearls.

Pearl luxury

Framed with pearls

Collar necklace “Gold placer”

Consumables

Velor and non-woven fabric
Fabric with sequins
White nylon thread
Hook clasp

How to do

Cut out one piece of fabric with sequins, interlining and velor measuring 50x7 cm.
Glue the reverse side of the velvet piece with non-woven fabric.
Then place this piece and the sequin piece together, wrong sides in, and sew along the edge with a blind stitch.
Make a clasp: sew a golden bead on one corner and a loop on the other.

Beaded Collar

Modern fashion trends sometimes take on unusual shapes. For example, this applies to a now popular accessory - a beaded collar. In any case, such an interesting thing looks quite unusual and decorates even the most boring outfit. Of course, high-quality items cost a lot of money, and therefore not all fashionistas can afford them. However, do not be discouraged: your own hands will help you to be on the crest of the fashion wave. They will help you create truly original beaded collars with your own hands. Well, we'll tell you how.

Master class “Beaded Collar” - simple and easy

You can make a chic beaded collar in two ways - using weaving or without it. The last option seems simpler to us. Before you make a beaded collar with your own hands, stock up on the following materials:

a small piece of fabric;
a piece of dublerin;
1 m satin ribbon;
22 bags of beads;
bead needle;
threads chosen to match the color of the beads and fabric;
pins;
scissors.

Using paper or cardboard fabric patterns, we cut out four parts of the future collar in pairs.

We cut out the same details from dublerin. In both cases, do not forget about seam allowances.

Using an iron, we attach the dublerin to the fabric, and then connect them together with a machine seam.

Having cut the satin ribbon in half, we sew its halves to the narrow parts of the future collar.

We sew the remaining paired parts to the collar, leaving holes for turning. We sew the holes by hand.

The most painstaking and monotonous work remains - decorating the collar with beads. To do this, string 12 beads onto a needle and sew the resulting arch to the base using several stitches.

We gradually sheathe the entire product with such turns.
The junction of the collar parts can be decorated with a large beautiful button or brooch. However, this is not necessary.

Collar necklace “Confetti”

You will need

Suede fabric
Nonwoven
Round sequins in matching colors
Threads to match suede
Needle
Ribbons for ties

How to do

Make a template for the future collar out of paper.
Then, according to the template, cut out two pieces of fabric and non-woven fabric.
Glue each fabric piece with non-woven material.
Then sew sequins of different colors onto one part of the collar. Sew them randomly and so that they overlap each other.
Now sew the pieces together.
Sew on the tie ribbons.

Collar necklace “Youth style”

You will need

Suede fabric
Nonwoven
Gold-tone beads
Long piece of chain
Nylon thread needle

How to do

Prepare a collar template.
Using the template, cut out two pieces each from fabric and non-woven fabric.
Glue each fabric piece with non-woven material.
Then take one glued piece and sew a chain along the entire edge. The result is a contour from a chain.
Then, inside this outline, sew beads in gold to create a pattern as in the photo. Or you can come up with your own pattern.

DIY collar made of beads

A do-it-yourself beaded collar will definitely add a touch of originality and individuality to any of your outfits. Moreover, this is a very fashionable trend of our time. Therefore, to always be on the crest of a fashionable wave, spend a couple of hours to weave such an original accessory.

Tools and materials Time: 4 hours • Difficulty:

beads 6 mm, 4 mm and 3 mm;
4 mm bicone;
needle and fishing line for working with beads;
silver chain;
lobster clasp;
one nail for forming decorations.

A beaded collar is a unique necklace that can easily complement any blouse or even a T-shirt.

Made from beads with your own hands, it will add bright accents and give a good mood to its owner.

Step 1: start weaving

We cut a piece of approximately one and a half meters long from a skein of fishing line. We string 3 4 mm beads on it, and cross both tails into another bead of the same size.

Since the weaving will be in one thread, the resulting element should be located at the end of the piece of fishing line.
Then we string a bicone, a 6 mm bead, a bicone onto the thread, and send it to the same bead from which the thread comes out, but we move from the opposite side.

Step 2: String more beads

The next step is to string three large 6 mm beads onto a needle and form another cross (the needle should come out of the bead of the previous segment). Thus, we form only three rows of such beads.

Step 3: round off the product

The next segment is rounded off by the product. To do this, the thread must come out of the side bead of the last segment. We string 3 more beads on it and form another cross.

For the next segment we use a pair of beads, since the remaining two will replace the beads from the previous rows. We weave to the end of the row. Then we change the size of the beads and add bicones according to the picture. That is, we string a 3 mm bead and a bicone and form a cross.

In this way we continue to form rows of beads from top to bottom and bottom to top. At the end, the caliber of the beads changes according to the picture.

Step 4: decorate the edges of the collar

In the end you need to form a total of three rows using only smaller beads and bicones. This is necessary in order to harmoniously connect the edges of the collar with each other. We form exactly the same second part of the collar and connect them together using beads. At the end, add one 8 mm bead between the beads of the last one.

We design the second edges of the elements somewhat differently. On each of them we attach a small piece of chain to which we attach parts of the clasp. The part that will be with the carabiner should be slightly shorter so that you can easily adjust the size of the collar.

The second side must be decorated with an additional segment. For this, we string a bicone and a bead onto a nail, and form a loop right above them using pliers. Using this loop, we attach the segment to the last link of the chain.

Without a doubt, a collar made with your own hands from beads according to our master class will make your outfit the centerpiece of attention at any event!

Christina All posts by the author (1123)

Collar necklace “Spring freshness”

You will need

Thin felt
Lace fabric
Multi-colored beads
Nylon thread
Needle

How to do

Make a collar template from paper.
Using the template, cut out a collar from felt.
Cover the felt collar with lace fabric.
Then randomly sew beads as in the photo or as your imagination tells you.

Get inspired by new ideas

And at the very end, I suggest you look at a few more photo ideas for creativity, more complex options for making necklace collars with your own hands.