DIY Santa Claus made from beads. Santa Claus made of beads: master class

Volumetric Santa Claus made of beads.

This beaded Santa Claus is made using the parallel weaving technique. The scheme is quite simple.

The diagram shows 1 row of crafts in a circle between the lines: the top row is the front part, the bottom row is the back part.

We start work with the hat. We put a large bead on the wire, then we string two beads onto one end of the wire, and pass the other end towards it into the same beads. We string 2 more beads onto either end of the wire and pass the other one towards them. The result is the front and back of the figure, row 1 (in the diagram - between the bead and the first line).

Next, we string 3 beads onto either end of the wire, and pass the other through them towards each other. We repeat the process. Thus we continue the subsequent weaving. The main thing is not to confuse the parts of the sides.

BEARD. Row 10 from the front side (after the nose) - we collect 9 beads for the face (2 beige, 3 white, 2 beige), then we make a beard on the same wire (2 white and the end is passed into the 1st of these two, 2 more white and end in the first of these two, we make 9 such needles). Now we pull this end of the wire through 9 beads of the face, starting from the very 1st (as in the beard diagram).

LEGS. The weaving ends with black beads - 10 face beads. row, 9 back, 8 faces. Next, we add a new wire (at least 15 cm) to this row, passing it through the central 2 beads and weave the legs as in the diagram with the same weaving.

HANDS are woven on one separate wire. We string 5 beige beads, 3 white beads and pass the other end towards the 1st white. Next, follow the same pattern for the hand and pass the free ends to the right place to the figure through the entire row. On the other hand, at the extended ends of the wire, we continue to weave the second hand, performing the action in a ritual manner.

Weaving a white snowman

A craft like a beaded snowman will be interesting to make, even for your children, because this is everyone’s favorite character.

To create it, we will need:

• wire and fishing line;
• needle;
• multi-colored beads.

Before starting the master class, review the proposed diagram:

To braid the head, we need to make a piece of fishing line 60 cm long.

Strengthen the bead and start working.

Create the first row: string six beads.

We put on the next three beads and pass the needle in the opposite direction.

The same steps again, after stringing six more beads.

Judging by our diagram, we create a fourth ridge: we put on one white and one black, and then two white things.

Fifth row, we form the nose. We put three scarlet beads on the needle and turn it in the other direction, threading it into the hole of the penultimate glass.

Read

Weaving funny dogs from beads according to patterns

We repeat these steps again.

We string six light ones and push the needle in a different direction.

We make the next ridges in the same way, forming the head of the craft.

Weaving the body of a snowman

To do this, we need a fishing line 95 cm long to make thirteen rows. We do the weaving in the same way as the previous steps.

To create hands, take two white and nine brown pieces of glass, stretch the needle through the two future ones.

We pull the needle in the opposite direction, through six brown beads. Then five beads of light colors are added to the main part.

5 more pieces and make a backward movement, 8 more pebbles. The scheme is as follows: two white and 1 blue beads, 2 blue and a white thing, add five light ones. Stripes 9 and 10 are woven in white.

We remove all excess ends. Our snowman is ready!

Santa Claus symbol

From early childhood, the arrival of New Year's holidays is associated with familiar concepts: a Christmas tree, tangerines, sweets and, of course, the Snow Maiden and Father Frost. This pair is taken out of the pantry every year and takes pride of place under the elegant New Year's tree.

In addition, with the arrival of December, the image of Santa Claus begins to haunt us everywhere: in store windows, on the TV screen, on surrounding objects. What is there: candlesticks and candles, napkins and tablecloths, dishes, cards and paintings, Christmas tree decorations, and even on clothes you can see a portrait of a cheerful old man.

And lovers of handicrafts themselves would not mind creating some kind of craft with Santa Claus.

Beading

Beading has a long history. Even the ancient Egyptians loved to make jewelry from beads: necklaces, bracelets, nets for women's dresses. But bead production peaked in the 10th century. Venetian artisans perfectly mastered the art of creating beads and carefully guarded this secret. Craftsmen decorated clothes, shoes, bags and wallets, special cases for fans and other elegant accessories with glass beads.

The arrival of beads in America reduced the demand for familiar traditional Indian materials. So, for a ritual belt or headband, needlewomen began to use a new type of beads. And in the Far North, beads were used to make decorations for fur coats, fur boots, hats, and even for reindeer sleds.

Modern wizards not only decorate clothing and household items with bead embroidery, but also create entire items from beads. The products are very bright and shiny. Therefore, themed crafts dedicated to any holiday are in particular demand: Easter, March Eighth, Christmas and New Year.

Options for original jewelry

Real craftsmen can make original jewelry from beads that is not inferior in beauty to industrially produced costume jewelry. A Snow Maiden with beaded jewelry will certainly be a great success at both a children's party and a corporate party. Using ready-made patterns or your own imagination, you can make an original necklace, a tiara for a children's New Year's snowflake or princess costume, a pendant with a chain, a bracelet or a ring from beads, bugles, beads of different sizes.

By decorating a metal hairpin or invisible pin with beadwork, you can get an original hair accessory . Such things go perfectly with clothes in ethnic style. If the decoration is colorful, the clothes should be more strict, monochromatic (and vice versa), otherwise the costume will look funny and ridiculous. A set of beaded jewelry must be designed in the same style. This type of jewelry is especially suitable for girls, but it will also look beautiful on mature ladies in combination with an original suit.

In order for beaded crafts to turn out beautiful, even, symmetrical and last a long time, it is necessary to strictly follow the weaving pattern and choose high-quality material for work. The quality of the material used for threading is also of great importance: fishing line or monofilament. If you are careful while working and don’t get distracted by anything, you can easily make original New Year’s toys, keychains and decorations. They will serve as a wonderful gift and will perfectly decorate an interior designed in any style.

Flat figurine of Santa Claus made of beads

Making a flat figurine of Santa Claus is very simple, and you can use it not only as a Christmas tree decoration, but also as a decoration for a New Year’s card.

So, Santa Claus made of beads. The operation scheme is described below.

• 4 beads are strung in the middle of the wire;
• through the first, the ends of the wire are threaded into the ring;
• then 1 red bead is strung;
• the other end of the wire is pulled towards.

2. The face is woven in the same way as the hat:

• 1st row of 6 pink or beige beads;
• 2nd row: 1 white/beige bead, 1 green, 2 white/beige beads, 1 green, 1 white/beige bead;
• 3rd row: 2 white/beige beads, 1 red, 2 white/beige beads.

• 3 beads are put on one side of the wire;
• 3 beads are strung on the other side of the wire;
• 2 beads are strung on one end;
• the second free end of the wire is threaded through this pair of beads towards each other.

• Using the parallel weaving technique, rows of 2, 3, 5 and 7 beads are created.

• Beads are strung on one side of the wire in the following order: 4 red beads, 1 white, 1 pink;
• through all the beads, except for the pink one, the same end of the wire is pulled in the opposite direction;
• the wire with the finished hand is pulled to the body.

• the figure according to the pattern is woven to the end;
• the wire is secured along broaches.

Volumetric Santa Claus made of beads - diagram

This beautiful three-dimensional Santa Claus can be used as a keychain, a Christmas tree decoration, or just as a toy. He will be cute and pleasing to the eye in any case.

A voluminous Santa Claus made of beads is perfect for beginners. The figurine is made using the “parallel weaving” technique.

This is how a three-dimensional Santa Claus is made from beads; the weaving pattern looks like this:

1. a large bead is placed on the wire;
2. then two beads are strung on one end of the wire;
3. the second end of the wire is passed towards the first into the beads already put on;
4. a couple more beads are put on either end of the wire, while the other is passed towards.

Thus, the first row of the front and back sides of the figure is already ready.

1. 3 beads are strung on one end of the wire, the other is passed towards them again.
2. The fifth point is repeated again.
3. Then two rows of 4, 5 and 7 red beads are made in the same way.
4. The weaving of the cap ends with two rows of 11 white beads.

Next, 9 beads are collected for the face in the following sequence: 2 beige, 3 white, 2 beige. The beard is also made on the same wire:

1. 2 white beads are put on, and the end of the wire is pulled into the first;
2. the first point is performed 9 times;
3. Finally, the end of the wire is pulled through 9 “face” beads, starting with the very first one.

Weaving the legs is done with black beads, as indicated in the diagram.

Hands are woven on a separate wire:

1. 5 beige and 3 white beads are strung, the end is passed into the first white one;
2. Several more rows are made in a similar way;
3. finally, the free ends are passed into the proper place to the figure through the entire row;
4. the second hand is woven on the other side at the elongated ends of the wire, performing the steps in the reverse order.

In this simple way you get a wonderful figure of Santa Claus.

Keychain: Santa Claus made of beads

In order to make a wonderful keychain in the shape of Santa Claus, you will additionally need to take either a chain with a key ring or a special cord. It is not recommended to make an additional loop of beads, as it will not be strong enough.

The mount can be attached to any product, both flat and volumetric. To do this, you need to thread a wire through the top bead and connect it to a ring or cord.

If a new product is being woven for a keychain, then it is better to choose a larger bead, which is a pompom on Santa Claus’s hat, with wider holes.

You can also simply thread the fastener between the rows of beads.

Beadwork in the interior

You can assemble an original garland from beautiful snowflakes or stars and hang it on the New Year tree. Snowflakes made from beads or seed beads also look beautiful as decoration for a child or adult’s carnival costume. Here's what you can weave from beads to decorate your interior:

• A miniature box or basket for storing various household items;
• Decorative decorations in the form of birds, flowers or butterflies that can be attached to curtains, curtains or blinds;
• Original coasters for dishes. True, they cannot be used for hot dishes, since the fragile beads may not withstand sudden temperature changes;
• Beautiful napkins in the shape of flowers, snowflakes, stars, which can be used to decorate a table in the kitchen or living room.

Also, in the interior of a living room or bedroom, paintings embroidered with beads and glass beads will look very beautiful on the wall. These can be landscapes, still lifes and even portraits - it all depends on the level of skill of the needlewoman.

Santa Claus and Snow Maiden made of beads, MK

As always, I found a bunch of amazing bead toys for you on the Internet. Here is Santa Claus, the Snow Maiden, and the Snowman, and even wonderful voluminous keychains with a New Year's theme. I think this composition will win more than one competition) These figures are woven using the brick weaving technique. You can, of course, weave with mosaics, but then it is more difficult to achieve stability in the shape of the figure.

The numbers on the diagram indicate the rows.

First, you and I will weave a Snow Maiden from beads. Here is its complete diagram. We weave the fabric according to the Snow Maiden pattern. Then we sew it into a tube - this is the body. Don’t forget to widen the Snow Maiden’s caftan at the bottom.

We tighten the top of the head and sew down the head.

And this is the hand of the Snow Maiden made of beads. It is also woven using the brick weaving technique. But only a narrow part, marked with a large number of arrows. Then we collect beads and weave a mosaic along the long part of the arm. And we also sew it into a tube. Sew to the caftan.

We trim the edges of the caftan, both bottom and top, using the principle of beaded fur.

You can also extend the braid or just long hair for the Snow Maiden.

Santa Claus is woven using the same principle only from other colors of beads. Also an important part of Santa Claus is a big red nose and a big white beard. Don't forget to make a beautiful hat for Grandfather.

In general, of course, by the way, such figures are not for beginners. But if you really want it, you can try it.

The staff is also woven with a mosaic - we add thick wire in the middle for rigidity. Well, the main thing is to design the composition and photograph it beautifully)

And for those who have not yet ventured into three-dimensional figures of Father Frost and And here is Father Frost and the Snowman. Snow Maidens from beads, you can weave a flat keychain.

There is also a snowman.

This is a very simple and very cute Christmas tree.

And this is a New Year's pendant

And what is New Year's Eve incomplete without? That's right, this holiday is not complete without decorations! Decorate your interior with beaded snowflakes

Nowadays, waterproofing materials are one of the important components in construction and, of course, when renovating a house or apartment. It is also important to know how to buy from, for example, a company that has been on the market since 2008. The gratitude and consistency of clients speaks volumes.

How to make a snowflake from beads - diagram with description

Let's start with simple patterns for weaving snowflakes from beads for those who are coming into contact with such creativity for the first time. It was precisely according to these instructions that my daughter and I wove our first snowflake. Of course, you need a little diligence, but dexterity comes quickly and the beads on the wire will soon be deftly folded into patterns. The main thing is to start! But what a delight it is when a winter, but so warm New Year’s snowflake appears on your palm, as if by magic.

For the craft we will need:

• Beads (for beginners it is better to take beads with a diameter of 3 millimeters)
• Wire for beads 0.3 mm thick
• Scissors

Cut the wire 40 centimeters long. We put two beads on it. We skip the first bead, and thread the wire through the second.

Now we tighten the loop and we get two beads one above the other. The tip of the wire should remain small on one side, about 4 centimeters, and large on the other. This will be the main length. Next, we put 2 beads on the short end of the wire, and 3 on the other.

From the side where there are 3 beads, we thread the wire into the outermost bead and carefully tighten it.

Next, we put on one bead and thread the other end of the wire from the other side towards it. Tighten well. Thus, the first ray of the snowflake is ready.

Let's move on. I hope everything works out for you. We make the second ray. We string 6 beads onto the long part of the wire. We move the outermost one, and thread the tip of the wire through the second one from the edge.

We tighten and adjust the beads well and weave the next step. Also, working through the long part of the wire, we put on two more beads and thread the tip through the bead that the skewer is pointing at, i.e. third from the left.

Like this. We tighten the wire, carefully distributing the resulting new ray of snowflakes. Now a long wire comes down from the outer bead, and we need to thread it in such a way that it is directed as shown by the red line.

We take the wire out in different directions and weave the next rays by analogy with the second, also stringing 6 beads.

After the next ray, we again draw the wire in the opposite direction and so we should get a six-pointed snowflake.

Now we connect and twist the wire, cut off the excess. This is such a beauty.

However, if some points remain unclear, you can watch this master class in a video. Moreover, this is not the only snowflake that can be woven from such beads.

At first glance, everything is very complicated, but following the diagrams, any needlewoman will be able to create such stunning snowflakes. These snowflakes are more complicated.