How to make claws from paper: origami, on fingers, wolverine, dragon, do it yourself, diagram, predator, from iron, wood, cardboard, glove, plasticine

If you are going to attend a masquerade party and have fun, then you need to choose the appropriate image. The ideal addition to your look would be paper nails, so today we’ll look at how to make them.

What you need for work:

Paper. You can use plain paper or harder paper. It is more difficult to work with thick paper, but the resulting nails will hold better;
Ruler, pencil, glue;
Paints;
Scissors.

Materials for creating paper claws: list

The materials needed to create paper claws are simple and everyone has them in their home. Here is their list:

paper will do: A4 or notebook paper. You can use a denser texture. It is worth knowing that it is easy to make claws from ordinary paper, but they will not be wear-resistant. Thick paper is difficult to fold, but the product will be durable and will last longer.
Ruler and pencil.
Glue - PVA or another for paper will do.
Scissors.
Gouache or acrylic paint. You will need it if you want to change the color of the white claws.

Now sit back comfortably at the table and begin the process of creating the product.

Materials

Additional materials for creativity:

Foil.
Textile.
Nail polish.
Glitter.
Thread and needle.
PVA glue, brush.

When working with origami and materials, be sure to follow safety rules. Advise your child about the safety of working with scissors and other dangerous objects.

When instructing, be patient, and most importantly, stock up on paper and other materials. As practice shows, sometimes children’s imagination doesn’t stop on paper alone! Anything can be put to work, from an old shirt to cardboard and candy wrappers, and if your imagination allows, you can also add additional elements to the claws, which will be discussed below.

Paper claws for fingers - option 1: how to make from paper?

Paper claws for fingers
We present to your attention one of the simplest and most affordable ways to create realistic paper claws for fingers in origami style. To make such a product you will need a square of paper. If it is rectangular, you can give it the desired shape using scissors, and then to make paper claws, you just need to follow the instructions:

Fold the sheet in half diagonally. It is better not to bend the paper sharply, otherwise there is a possibility of wrinkles - perform the process smoothly but clearly.
Then unfold the piece of paper and draw a straight line along the fold line. You don’t have to do this if the line is already visible, but for convenience you should still draw it.
Fold the sides of the square to the strip that was drawn before. You have a figure consisting of two isosceles triangles - top and bottom.
Fold the created quadrilateral in half, bending 2 sides to the fold strip drawn in step 1 . Along this straight axis of symmetry, bend the sheet from left to right.
Place a point in the middle of the longest side, then connect this point to the vertex opposite this side.
After this, bend the sheet along the resulting fold. You can draw a line with a pencil, this will make the work easier.
Wrap the bottom triangle around and tuck the tip in so that the paper is secured.
Straighten the resulting product.

Paper claws for fingers
Similarly, create 9 more claws so that the effect of this accessory is stunning.
For more details on these instructions, watch the video below.

Predator Claws

Any image of a predatory animal will look even more original if you add claws to it. Any New Year's costume for a tiger, lion or cat can be complemented with a quick preparation that will take no more than 15 minutes. Practice with your children; we are sure that this format is suitable even for beginners. Detailed instructions are described below.

We offer instructions on how to make origami claws from paper in the image of a predator

To start the preparation, we will need a square sheet with equal sides. Alternatively, you can make soft claws from fabric, and then sew them to the glove with thread or PVA glue so that the ends do not separate. We fold a regular sheet from the “diamond” format into a triangle.

To do this, simply bend the sheet in the center. We wrap the extreme sides inward to the center line, which in turn forms the “horn” base. We fold the horn in half again and bend the bottom corner upward, forming a depression. Next we bend one end and open the pocket. That's it, the first claw is ready! You can make claws of different lengths and thicknesses, which will diversify their appearance.

How to make paper claws for fingers - option 2: from paper, origami

Paper claws for fingers
Here is another interesting option for creating paper claws for fingers from origami paper. Stages of creating such a stylish accessory:

Draw a triangle on A4 sheet of paper. This will be a template. The base of the figure with three corners must be the correct size so that the claw fits well on the finger.
Take the diameter of all your fingers and this will be your main measurement.
Consider the following: you will be wearing the accessory on bare limbs or wearing gloves. To the size you need, add another 5 mm for the allowances that are necessary for gluing the sides.

Part for paper finger claws

Cut out the resulting template blank and outline its contours on cardboard paper. Cut out the resulting figure with three corners and roll it into a “tube” in the form of a cone.
Now glue the sides together. To do this, we added 5 mm to the width on the sides.
Leave the cone tube for a while to allow the glue to dry thoroughly.
After the workpiece has dried, apply two marks diagonally on the cone.
Using them, cut the part into 3 parts . It is recommended to use a utility knife for this process. If you don't have one, use scissors.

Part for paper finger claws

Insert these parts - one into the other, adhering to the correct order, namely the one in which the connection was made up to this point.
It is worth paying attention that the elements are inserted at a small angle, otherwise the effect of “real claws” will not be obtained.
Connect the “joints” using adhesive tape or any paste.

Tip: If you made a mistake with the sizes, you can trim it a little so that the claws do not fall off the fingers.

To make these elements look more reliable and interesting, and to be comfortable to wear, you can glue the claws to old gloves. To do this, follow these steps:

Put the accessory (glove) on your hand and apply glue to the inside of the nail surface.
Then put it on the finger of the glove.
Wait a bit for the glue to dry.

Important: If gloves are made of materials such as leather, leatherette or rubber fabric, then gluing can be done directly on the hand, since such products are not capable of allowing glue to pass through. If the gloves are made of fabric material, before gluing the parts, put them on a pencil. This technique will help you glue the parts better and avoid getting your fingers dirty.

When all the claws are glued, paint using gouache. You can use acrylic paints instead.

How to make paper claws for fingers - option 4: from paper, origami, video

Another option for creating unusual paper finger claws in the style of Freddy Krueger , which does not require any special paper folding skills, material costs, or a lot of time. The method is simple, but the result will surprise you. You only need A4 paper .

Paper claws for fingers

Follow the instructions below and you will definitely get this product using the origami technique:

Take a landscape sheet and make a square out of it. To do this, fold the paper so that you get a quadrangle, with a triangle at the top and a rectangle at the bottom.
Cut a rectangle and unfold the sheet.
Fold the square in half to create a rectangle.
Fold the resulting rectangle in half to create a four-layer square.
Cut the paper along the fold lines to create four equal squares. Each small square is a blank for a claw, resulting in four claws.
Fold the square in half diagonally to create a triangle. Carefully iron it along the fold lines. After this, unfold the sheet.
Fold the side of the square to the fold line.
Turn the paper over to the reverse side and fold the bottom (that is, the one whose vertex lies on the bend line) triangle upward.
Wrap the untouched side around the triangle you made in step 6. If you folded the left side, wrap the right side. If you bent the right one, the left one.
Tuck the corner into the “pocket” formed in step 7.
Do all the steps three more times with the remaining blanks. Make as many claws as you need. Ready.

Paper finger claws - the creation process

Freddy Krueger's Claws

Quite a vivid and interesting example of a character who inspired horror in children. Interestingly, the claws can be used as decoration for a Halloween costume or for role-playing games.

It doesn’t take long to make them, and with a flight of fancy there are no restrictions on color and materials. The claws can be made of a thick layer of paper on top of foil, then they will be quite dense and durable, which will allow you to play without fear of damaging them.

Note: For additional strength, you can cover your claws with tape!

We offer instructions for origami Freddy Krueger's claws step by step.

For production we need a standard sheet of paper. We make a basic square blank by folding one edge of the sheet. We do not cut or tear off anything. The claw will be made exactly according to this paper format. Next, we turn the workpiece over and compare the sharp tip with the accompanying horizontal line.

Thus, we get an irregularly shaped pentagon. Where one is strictly correct, at 90 degrees, and the other is a broken angle. Now we bend the edge with a broken angle towards the center of the overall workpiece to form a regular square with identical sides.

We turn the workpiece over, turn away the inner side of the sheet and make a curved end from the triangular base. Now, according to the creator’s wishes, all that remains is to bend the pocket or leave it altogether. In particular, a long, non-curved corner will be more comfortable for small and narrow fingers. For those who have thicker fingers, it is better to fold the edge, so the claw will sit more tightly in place.

How to make an origami paper claw - option 5: from paper, video

Paper claws on fingers
With the release of the movie "X-Men" , the number of Wolverine who want to have the same legendary claws as his has increased. This has led to an increase in demand for various types of accessories. But why spend a lot of money if the accessory can be created at home from simple materials that are always at hand. To create origami paper claws for one hand, you will need:

6 A4 sheets (it’s better to take dark colored paper to make them look more realistic). If this is not the case, then white will do.
Scissors.
Thin tape.
Insulating tape.

Once you have prepared the necessary materials, you can get to work:

To begin, place the blank paper sheet horizontally, fold it in half and iron it along the fold strip so that it is more clearly visible.
Accelerate it and you will see that it is divided into two fragments - upper and lower.

Blank for paper finger claws

Then bend the bottom fragment halfway, leaving 5 mm from the edge of the leaf to the fold.
Straighten the workpiece and you will already see two fold strips.
Fold the bottom piece of paper in half, and then fold it to the middle of the sheet 2 times.
Roll the other side in the same way, but turn the sheet over first.
Take one of the extreme corners of the already folded turnover and bend it so that you end up with a straight triangle.
Fold the corner of the second side in the same way.
Then we will make sharp spears out of them. To do this, tuck the folds on both sides.
Now iron the fold lines and straighten them. It turned out to be 2 fold strips. Take scissors and cut the edge of the paper along the top lines.
Fold the remaining edges again and fold the sheet in half. Glue the edge that was cut and the bottom one with tape, and leave the third one untouched.
You've got some kind of “arrows”, for safety, take scissors and make a rounded sharp edge. You will need three such blanks - for one hand.

Blank for paper finger claws

Take a white sheet of A4 . Fold the corner on the right and bottom and begin to roll it along a diagonal line into a tight tube. To prevent such a blank from unfolding, glue the tip with tape or glue.

Blank for paper finger claws

Now make a semblance of a snail shell by rolling a tube, as in the photo above. Take the tube by the edge and bend it four times. Take a piece of tape and use it to seal this “snail” so that it does not unwind.
Make 2 more of the same blanks .
Take these “snails” and glue them with tape so that you can comfortably hold them between your fingers. Use adhesive tape to secure them again.
When you glue the sticks together, you will have a trident and three target blanks.
Now take one piece and place it on a stick with the cut edge.
Secure with tape the places where the sticks connect to the blanks.

The claws are ready. You can please Wolverine fans with such an amazing gift or complement your outfit for a costume party.

Paper claws for fingers

Decorating claws

Sometimes it’s not easy to find good enough materials, and you have to figure out a lot yourself. Any additional materials will be used to help with needlework. For example, using scissors you can make a beautiful fringe on the claws, which will add an interesting “winter” look, like a fluffy snowflake.

In this way, metal claws can be given the appearance of broken iron, and if you want to do something interesting and original, you can always decorate the claws with stones, beads, or embroider something on them with beads. Fabric based claws can be folded into a glove and sewn. There is no limit to the imagination; here you can use decoration for any occasion.