A warm and cozy sweater is one of the basic things in a woman’s wardrobe. You can knit a sweater using either light and delicate mohair, melange yarn, or warm wool yarn. Sweater models are very diverse. A women's knitted sweater goes well with skirts, trousers and jeans. Knitted sweaters for women with knitting patterns and a description of knitting can be found in our article.
Women's mohair sweater with cowl collar with diagrams and descriptions
This very beautiful model of a women's sweater is suitable for a girl, a young woman, or an older woman.
The color can be chosen to suit your taste. We will now tell you how to knit a sweater for women of this model. You will need:
- 350 gr. mohair (50g./250m.) – knit in two threads;
- knitting needles No. 3 and No. 5.
Size: 46/48.
Knitting density: 16p. x 19r = 10 x10cm.
Knitting technique: we knit a wave pattern in accordance with the diagram. Inside out yarn overs in purl knitting pattern. Repeat from rows 1 to 36.
Description
We start knitting sweaters for women from the back. On the sp. No. 3 we cast on 83 pets. We knit the first row like this - 1 edge st., 3 l.p.*10 i.p.+3 l.p.* 4 times. Then we knit like this – 1 cr.st., 3 sts. purl stitch before rapport, *13 sts + wave pattern* five times, 1 cr.st. There should be six repeats in one row. The armhole is knitted like this - in the 93rd row we close off 5 loops on each side. Then cast off 2 stitches in every second row. 2 times, 1 loop twice. There should be 61 loops left. We continue knitting until row 136. Then we close all the loops.
We knit the front part of the sweater in the same way as the back. Only at 116 rubles. We begin to design the neck. To do this, you need to close the middle 13 loops and close 2 loops on both sides of these 13 4 times in every 2nd row. There should be 16 loops left on each side. In the 136th row, close all loops.
Let's start knitting the sleeves. Both sleeves are knitted in the same way. We cast on 44 loops. We knit the first row in the following way - 1 edge st., 3 lp*10 i.p+3 lp* 2 times. Then we knit like this - 1 cr.st., 3 sts. purl stitch before rapport, *13 sts + wave pattern* 2 times, 1 cr.st. There should be three repeats in one row. To expand the sleeves in the 10th r. From the beginning of the work, make an increase in the 1st stitch on both sides, and then every 10th row, increase the 1st stitch. 6 times. There should be 58 stitches on the needles. In order to get a sleeve roll, you need 84 r. make decreases - close 4 loops on each side, and then close every second row 1 time for 1 loop, nine times for 1 loop, and four times for 2 loops. There should be 12 loops left. At 114 r. close the loops.
All that remains is to assemble and tie the neck. Sew the sides and shoulders. Then we sew the sleeves and sew the sleeves into the armholes.
We knit a sweater with a collar. To knit it, you need to cast on 84 loops along the neckline and knit sp. No. 3 elastic band 1x1 seven rows. Then you need to change the sp. on No. 5 and continue knitting with an elastic band for another 43 rows. In 51st r. close all loops. A beautiful knitted sweater for women with mohair knitting needles is ready!
Spectacular pullover with a combination of patterns
Sizes : 36-38, 40-42 and 44-46.
Data for sizes 40-42 are given in brackets (), for sizes 44-46 - in double brackets (()). If only one value is specified, it applies to all 3 sizes.
Pullover length: approximately 65 cm.
You will need:
- 550 (600) ((650)) g of yarn type LINIE 14 CAMMINO from ONline red color Fb.16 (75% fine merino wool, 25% polyacrylic, 125 m/50 g);
- knitting needles No. 4.5 and
- one aux. spoke.
Facial surface : faces. rows - persons. loops, purl rows - purl. loops.
Relief pattern : The number of loops is a multiple of 6. Knit according to the pattern. In purl. rows of loops knit according to the pattern. Repeat in height from the 1st to the 12th row.
Paths from braids : Knit according to the pattern on 26 loops. In purl. rows of loops knit according to the pattern. Repeat in height from the 1st to the 12th row.
Square pattern : The number of loops is a multiple of 16. Knit according to the pattern. In purl. rows of loops knit according to the pattern. Repeat constantly from the 13th to the 36th row (= 24 r.).
Knitting density : average: 24 p. and 28 p. = 10 x 10 cm.
Back : Cast on 106 (116) ((126)) sts using double thread in a cross pattern, knit 1 purl. purl row and knit 6 cm. stitch, while in the last purl. row after every 5th stitch from the cross thread, add 20x (22x) ((24x)) x 1 purl. cross. = 126 (138) ((150)) p.
Distribute the loops next. way: chrome. p., 24 (30) ((36)) p. relief pattern, 26 p. braid track, 24 p. relief pattern, 26 p. braid track, 24 (30) ((36)) p. relief pattern , chrome P.
After 17 cm = 48 r. continue the relief pattern in the following. distribution: chrome. p., 24 (30) ((36)) p. relief pattern, 6 p. elastic from a braid, 64 p. = 4 repeats of a pattern of squares, 6 p. elastic from a braid, 24 (30) ((36)) p. relief pattern, chrome. P.
In this distribution, knit 26 cm = 72 r. (= 3 x from 13th to 36th row).
Then continue the trail. way: chrome. p., 24 (30) ((36)) p. relief pattern, 26 p. braid track, 24 p. relief pattern, 26 p. braid track, 24 (30) ((36)) p. relief pattern , chrome P.
To cut the neckline, after 62 cm of total length, close off the middle 30 (32) ((34)) sts and finish both sides separately.
To round the neck in every 2nd r. decrease 1 x 2 and 1 x 1 p.
At the same time, for the shoulder bevel from the outer edge, close in every 2nd r. 1 x 12 (14) ((16)) sts and 3 x 11 (12) ((13)) sts.
Before : Knit as a back, only for a deeper neckline, after 57 cm of total length, close the middle 12 (14) ((16)) sts and finish both sides separately.
To round the neck in every 2nd r. decrease 1 x 3, 2 x 2 and 5 x 1 p.
After 62 cm of the total length, make the shoulder bevel as described for the back.
Sleeve : Cast on 54 (54) ((59)) sts using double thread in a cross pattern, knit 1 purl. purl row and knit 6 cm. stitch, while in the last purl. row after every 5th stitch from the cross thread, add 10x (10x) ((11x)) x 1 purl. cross. = 64 (64) ((70)) p.
Distribute the loops next. way: chrome. p., 18 (18) ((21)) p. relief pattern, 26 p. braid path, 18 (18) ((21)) p. relief pattern, chrome. P.
Knit in this distribution, while bevel the sleeves on both sides in every 8th r. add 12 x 1 p. (in every 6th row 10 x 1 p., in every 4th row 6 x 1 p.) ((in every 6th row 7 x 1 p., in each 4th row 10 x 1 p.)) = 88 (96) ((104)) p.
Include additions in the relief pattern.
For the upper bevel of the sleeve after 41 (39) ((37)) cm of the total length on both sides in every 2nd r. bind off 6 x 5 (5) ((6)) sts, then bind off the remaining 28 (36) ((32)) sts.
Assembly : Sew shoulder seams.
For the collar, along the edge of the neckline, raise 96 (102) ((108)) sts (= number of loops is a multiple of 6) - back 40 (42) ((44)) sts, front 56 (60) ((64)) sts - and knit with an elastic band from braids according to the pattern (= 2 purl sts, 2 knit cross sts, 2 purl sts).
After 8 cm, close the loops using a cord-like method.
Sew in sleeves as marked, then sew side and sleeve seams.
Pink fashionable mohair sweater with openwork braids for beginners
A very delicate pink sweater with openwork stripes.
You can learn how to knit a sweater with such a beautiful pattern from the description. You will need:
- 380 g mohair (100 m/50 g);
- knitting needles No. 3.5.
Description
The sweater must be knitted according to the pattern and description.
Keep up with fashion - a thick sweater with a braid
The list of trendy items this season also includes a sweater with voluminous cable knitting. It is knitted from thick yarn (100 g is only about 25 meters). The diagram includes a size range with the following measurements: length - 58.5 - 61 cm, chest girth - from 91 to 117 cm, sleeves - 35.5 - 39 cm.
Necessary materials:
- yarn - 9 skeins of milky color;
- straight knitting needles number 20;
- curved auxiliary needle (or stitch holder);
- knitting needles on fishing line;
- big hook.
Step-by-step description of the process:
- We will start knitting from the bottom of the back. Cast on 22 stitches.
- Knit the first row in this order: P6, K8, P6.
- Turn the job around. Knit according to the pattern.
- Follow this pattern for two more rows.
- From the 5th row, knit like this: 6 p., 4 sts. on auxiliary needles at the back, 4 stitches. Knit the removed (this will be a braid for eight loops) 6 purls.
- To make braids, cross the stitches in every 8th row 3 more times.
- From the ninth row, knit 1 purl, 2 stitches. together purl. The penultimate loop is purl 2 together, purl 1. Knit 5 rows.
- Row 15 - purl 1, purl 2 from the second row, purl 1. Knit straight for seven rows.
- For the sleeve, cast on 7 stitches in the open method (with an auxiliary thread) at the beginning of the next 2 rows, and 6 stitches in the next two. (there will be 46 of them). Knit straight 6 rows.
- Before: knit 19 stitches, slip middle stitches. Cast on 8 stitches onto the holder. (open cast), knit a braid.
- When there are 14 rows on the needles, cast off 6 sts. at the beginning of the 15th and 16th rows and 7 sts. at the beginning of 17 and 18.
- Knit 7 rows, repeat row 9 for back. Make 5 more rows, repeat row 15. Work 8 rows and bind off stitches.
- Steam and sew the product along the side seams, crocheting a connecting post in every second row along the bottom edge of the joints.
- Tie the collar using the “pipe” technique.
Advice! Knitting braids on bulky sweaters with knitting needles can be described as follows: several stitches in a row are transferred to an additional knitting needle and held before work. Then knit the loops behind the removed ones, then the loops on the auxiliary needle.
Sweater knitted from melange yarn with patterns and descriptions for beginners
A sweater for women of such a simple model made of melange yarn is perfect for a beginning knitter. It is very easy to implement. This sweater is knitted using stockinette stitch, and the beautiful collar is knitted with 2x2 rib.
You will need: 250-300 gr. mixed melange mohair yarn; knitting needles No. 5 and No. 6.
Size: 36(38/40)42.
Description and knitting pattern
We start by knitting the back. To do this, in accordance with the size, dial 62 (70) 78 on needles No. 5 and knit 5 cm with an elastic band. Then go to sp. No. 6 and knit in stockinette stitch. In the first row you need to make decreases. To do this, we evenly distribute the following number of decreases in the row: 0(2)6. Next we knit according to the description and diagram below.
The front of a melange yarn sweater is knitted similarly to the back, but the neckline is knitted separately. To do this, at a height of 50 (51) 52 from the beginning of knitting, you need to close 8 (9) 8 central loops. Continue knitting each of the parts separately. Then in every second row, decrease 7 times on both sides, one loop at a time. The shoulders are knitted like on the back. At a height of 70 (71) 72 close the loops.
To knit sleeves, you need to cast on 5 needles 34 loops and knit 10 cm with an elastic band. Next we knit with stockinette stitch sp. No. 6. To decorate the bevel of the sleeves, you need to add 1 loop in every 14th row from the elastic 4 times, 5 times in 12 r. on the 1st loop and 6 times on the 1st stitch in every 10th row. After 45 cm from the beginning of knitting, we form the okat. To do this, 13 times in every 2nd row we make decorative stitches, decrease 1 stitch and cast off 2 stitches. 2 times. At a height of 60 cm, bind off 4 (6) 8 loops.
Product assembly. Sew shoulders and sides. Sew in the sleeves. Cast on 84 stitches along the neckline. Knit in the round with an elastic band of 18 cm. In every second r. make 1 yarn over from two knit stitches in the middle of the front neck. Next row knit according to the pattern. Your knitted stylish sweater made from melange yarn is ready!
Sweater with a beautiful raglan
This model is distinguished by elegance and simplicity. It is made from DROPS NEPAL yarn (65% wool and 35% alpaca, 75 meters per 50 gram skein), but you can take any other yarn with a similar meter. For size M you will need 600 g. Knitting needles are recommended No. 5.5 circular.
Let's get started:
The sweater is knitted in the round from the neckline. We cast on 66 loops on the knitting needles, divide them into back, front, sleeve and raglan loops. We knit 2 rows in the round using garter stitch. Then for the back we knit 2 rows back and forth, not in a circle, in order to form a neckline, then we knit in the round. The raglan is knitted according to the pattern below, the rest of the fabric is knitted in stockinette stitch.
Having reached the end of the raglan (you need to check the given pattern), we put the sleeve loops on additional knitting needles and knit the front and back parts in the round to the desired length, while making additions according to the pattern to expand the fabric. On the sides below the raglan we continue knitting according to the raglan pattern. Having reached the incision site, we separate the front and back parts on the sides and finish separately in order to make the incision. We knit the last 4 rows in garter stitch. We close the loops.
We knit the sleeves in the same way, making decreases to narrow them, according to the pattern. We knit 7 centimeters at the end of each sleeve with a 2*2 elastic band.
https://youtu.be/https://youtu.be/3Y0fWvcfSp8
_
Original white women's knitted sweater with a round yoke with diagrams and descriptions for beginners
A very delicate white sweater with a round yoke will suit most girls and women. Read on to learn how to knit a stylish and youthful sweater. Knitting a round yoke is not particularly difficult, and at the same time it looks very feminine.
You will need:
- 750 gr. cotton and viscose yarn (120 m/50 g);
- straight and circular knitting needles with numbers 3 and 3.5.
Size: 44-46(48-50).
Description
The main pattern is knitted according to pattern 1. The placket pattern is 1 p. persons.p., 1 rub. purl loop. The yoke is knitted with the following pattern - pattern 2, knit circles, purl circles - we knit the loops in accordance with the pattern, and purl the yarn overs.
We start knitting the back of the sweater with a set of loops 98 (106) per sp. No. 3. Knit the next 7 centimeters with a 2x2 rib. In the last row of elastic, add 35 (37) stitches evenly along the entire length. Next we knit with the main pattern using knitting needles No. 3.5. Having knitted 32.5 centimeters from the beginning of the fabric, bind off 2 loops on both sides and then cast off 1 stitch 8 times. and 2 pets. alternately in each second row. When the length of the fabric reaches 39 cm, you need to put the loops aside.
The front part is knitted similarly to the back.
Knitting sweater sleeves begins with a set of 50 (54) stitches per sp. No. 3. Continue knitting with an elastic band for 6 centimeters. In the last row of elastic, evenly add 29 (25) cm. Using knitting needles No. 3.5, continue knitting with the main pattern, starting from the arrow in pattern No. 1. To create a sleeve bevel, you need to add 16 times one loop in every sixth row. Having knitted 40.5 cm from the edge of the part, you need to bind off two loops in each second row, alternately eight times, 1 stitch each. and 2 pet. There should be 83 stitches left on the knitting needles. Place the loops at a height of 47cm. We knit the second sleeve in exactly the same way.
Knitting a yoke begins with collecting all the postponed loops on a circle. No. 3.5. We knit the next row with knit stitches. Then touch the edge loops and knit two loops together 11 (12) times. Result – 361(380) pets. We continue knitting the yoke pattern. Having knitted according to pattern No. 2, we switch to circle knitting needles No. 3 and knit 2.5 centimeters with a strip pattern. In the fifth circle, evenly distribute the decreases - six times, 2 stitches each.
It is advisable to join the finished parts using a knitted seam. Congratulations! An elegant women's white sweater with a round yoke is ready!
https://youtu.be/https://youtu.be/DFExeoZCmfg
_
Sweater with jacquard yoke
A very feminine, beautiful and quite simple sweater, with the exception of the yoke with a jacquard pattern, which you will have to work on to get such a stylish new thing.
To work you will need:
- DROPS AIR threads (70% alpaca, 23% polyamide, 7% wool, 150 meters per 50 grams) in two shades. It is not necessary to use this particular yarn; you can choose a thread with a similar yardage.
- Circular knitting needles No. 5.
Let's get started:
We cast on 80 loops on the knitting needles and knit several rows with a 2*2 elastic band to form the neckline, evenly adding loops around the circle to expand the fabric. On the back we knit 2 additional rows, going back and not closing the circle.
Next we knit in the round again. According to the pattern, we begin to knit a jacquard yoke pattern according to the pattern. When the yoke is knitted, we put the sleeve loops on additional knitting needles and continue on the front and back parts on circular knitting needles until we reach the desired length, evenly adding loops on the sides for a slight expansion, according to the pattern. We finish the work with several rows of 2*2 elastic.
Then we return to the sleeves and knit each of them on circular knitting needles in stockinette stitch, finishing the knitting with a 2*2 rib.
Original white women's sweater with braids with patterns
A white cable sweater is not difficult to knit, although it may be difficult for beginner knitters.
If you follow the diagrams, everything will definitely work out. You will need:
- pure wool yarn;
- knitting needles No. 4 and 4.5.
Description
The rib of the sweater is knitted with needles No. 4, the main pattern is sp. No. 4.5. After knitting the elastic, you need to make 25 decreases evenly in one row. All other reductions are indicated in the diagram. The front part is knitted like the back up to 36 cm, and then you need to switch to knitting according to pattern No. 2.
Sweater with pockets
An excellent model for outdoor recreation. This sweater features original large and stylish patch pockets. It is quite simple to make; there is no need to knit the armhole and sleeve head; the product lies gently along the contour of the body due to the pattern and soft yarn.
For it you will need:
- DROPS AIR threads (70% alpaca, 23% polyamide, 7% wool, meter 150 meters in 50 grams). It is not necessary to use this particular yarn; you can choose a thread with a similar yardage.
- Knitting needles number 5.
Let's get started:
The sweater is knitted in separate pieces and then assembled.
For the pattern, you can use a pearl pattern: alternately knit the front and back loops in the front row, the back row - according to the pattern. Next front row: change the order and knit over the knits - purl and over the purl - knit.
First we knit the back according to the pattern given below. Here we immediately start knitting with a pattern, without an elastic band. Then we knit the front part in the same way, but with a deeper neckline.
We start the sleeves with 2*2 elastic and then move on to the pattern. We check the sleeve with the pattern.
Then you need to knit 2 patch pockets, starting with a pearl pattern and ending with several rows of 2*2 elastic.
Next, we assemble the parts and tie the neck with an elastic band.
Women's raglan sweater
To knit the very popular raglan sleeve, watch this video.
The diagram below shows how you can knit raglan.
Ways to reduce raglan sleeves.
Reducing the loops using raglan sleeve needles.
Decorative decrease in raglan sleeves.
Oversized cotton sweater
Step-by-step visual master class on video of knitting a sweater from start to finish. The yarn used is Vivchari Cottonel 75% cotton and 25% acrylic. It took 400 grams of yarn.
Part 1.
Part 2.
Part 3.
This video shows how to crochet the edge of a product. The method is very simple and fast, and the product has a neat and finished appearance.
Return to content
Green women's sweater with hood
A sweater with a hood of this model is ideal for walks, trips out of town and informal meetings, both for girls and women. Such a beautiful and original sweater with a hood and a beautiful pattern will become an indispensable item in your wardrobe.
You will need:
- 600-700 gr. Merino Air sheep wool yarn (130 m/50 g);
- knitting needles No. 4.5.
Size: 36/38 (40) 42/44.
Knitting an elastic band – 2 edge loops + loops multiples of 4. Knit rows – 1 stitch + 2 stitches + 1 stitch. Purl knit according to the pattern. The diagram shows only knits.r., and purl.r. knitted according to the pattern. We repeat the rapport between the edge loops. Pattern with braids (A) – loops are multiples of 4 and two edge loops. Knitting is carried out according to pattern No. 1. Repeat rows 1-4, complete rows 5-6. Pattern with braids (B) - loops in multiples of 8 and two edge loops. We knit according to pattern No. 2. We knit once 1-14 r. and repeat 5-14 rubles. Honeycomb (pattern) - loops are multiples of 4 and two edge loops, knit according to pattern No. 3 with 1-4 r.
Pattern A - the sequence is as follows: elastic band - 28 rubles, 34 rubles. pattern A, 74 rub. pattern B, 30(34)38 honeycomb pattern. Total 166(170)174 rows depending on size.
Pattern B - the sequence is as follows: knit 68 rows with an elastic band, 42 r. pattern A, 22 r. honeycomb pattern. Total 132 rows.
To knit the back of a sweater with a hood, we need to cast on 114 (122) 130 stitches. and knit with pattern A. After 40.5 centimeters from the beginning of knitting (this is approximately 110 rubles), we close eight loops on each side for the armholes. After 59 (60.5) 62 centimeters from the edge of knitting for bevels, close in every second row 7 (8) 9 stitches. at both sides. After 61.5 (63) 64.5 cm from the edge of the knitting, close the loops.
We knit the front part of the sweater with a hood like the back, but to knit the neckline we use 55.5 (57) 58.5 centimes. we close the central 12 loops and finish the resulting two sides separately. To get a beautiful round neck, we close off 1 x 4.5 x 2 and 1 x 1 stitches in every second row. Focusing on the back, close the loops.
To knit the sleeves of a sweater with a hood, we need to cast on 58 (62) 66 stitches. and knit with pattern B. In each. in the eighth row we add one loop 13 times and in every sixth row three times one loop, in the subsequent eighth row one loop 1 time and in every sixth row one loop 1 time. After 49 centimes. (32 rows) from the edge of the product, close all loops.
Start knitting the hood from the left half. To do this, cast on 18 stitches. and knit with a braided pattern (A). Additionally, we cast on from the set edge for the side bevel on the right in every second row 4x6 and 4x7 stitches. and include them in the pattern. After 21.5 centimes. from the edge we close 1 st to round it inward on the right. and every 2nd row 4x1.4x2.1x3.1x4 stitches. After 29.5 centimes. put all the loops aside. Symmetrically knit the right side and connect the set-on loops with a knitted seam and connect the back seam.
We assemble the product. To do this, we sew the shoulders and sew the hood to the neck of the sweater. We sew in the sleeves, sew the sides and sleeves at the seams. Congratulations – your beautiful hooded sweater is ready!
Sweater with long back
One of the highlights of modern sweaters is the elongated back. Consider this version of a women's sweater. By the way, this feature can be used for any other pullover model, simply by knitting the back part longer than the front part.
For the model in the photo below you will need:
- DROPS AIR threads (70% alpaca, 23% polyamide, 7% wool, meter 150 meters in 50 grams). It is not necessary to use this particular yarn; you can choose a thread with a similar yardage.
- Knitting needles number 5.
We start knitting from the back, then the front and sleeves. We make all the details according to the pattern using stockinette stitch, on the sides of the front and back and for the sleeves we use the pattern shown in the diagram.
We sew the finished parts together, leaving slits on the sides. We tie the neck with an elastic band 2*2.
