Shambhala bracelet: meaning, how to select and prepare stones, list of things to weave. DIY Shambhala bracelet, one-color and two-color, for men: weaving patterns for beginners, master classes,

Shambhala bracelet: what is it, what is its meaning?

The Shambhala bracelet was named after an entire country. Just not real, but mythical. You can read more about it, for example, on Wikipedia .

Translated from the ancient Indian language, “Shambhala” means something like “place of peace.” The knots, which later replaced the stones, symbolized the mountains . celestial bodies influencing humans

IMPORTANT: The main meaning of the bracelet is to be a guide to harmony.

However, this decoration has many purposes:

Protect the owner from adverse circumstances. Moreover, regardless of the source of these circumstances.
Give fearlessness . This may seem strange at first. However, the Eastern sages believed that fearlessness grows precisely from harmony.
Give confidence in your own abilities.
Give good health. After all, physical health is often linked to emotional health.
Attract positive energy, imparting optimism.
Cleanse the aura. It was believed that the owner of the bracelet was learning to become a better person, beginning to better understand and accept the world.
Establish a connection with the subconscious . The owners of the jewelry sincerely believed that it helped them understand themselves better.

The mysterious Shambhala, after which the bracelet is named, has haunted the minds of many centuries.

How to choose the right stones to weave a Shambhala bracelet: tips, recommendations

Before you start making a Shambhala bracelet, it is worth finding out which stones are suitable for a particular person. People often focus on zodiac signs. We recommend that you read our articles about amulets for men and women.

It’s also worth deciding what kind of effect is expected from the bracelet:

Attracting love, which is based on mutual trust and fidelity - garnet, pink quartz, carnelian will help
Creating a family, procreation – rose quartz, malachite and agate
Health promotion – jasper, onyx, amber, citrine
Stress relief – labradorite, agate, citrine, moonstone, crystal, pink quartz
Protection from envious people - pearls, cat's eye, hawk's eye, coral, hematite, rock crystal
Attracting good luck in any area - selenite, agate, jade, malachite
Increasing luck in various kinds of lotteries - turquoise
Attracting success in money matters and, in particular, in your own business – amethyst, rock crystal, onyx
Sharpening intuition, assimilation of knowledge – yellow onyx, crystal, moonstone

INTERESTING: It is recommended to rely on intuition. If a stone attracts like a magnet, you should definitely choose it.

The Shambhala crystal bracelet looks beautiful and sharpens intuition

What is the meaning of the bracelet?

What important functions does the amulet perform?

Protective. Protects from the influence of negative circumstances. It will attract good luck and help in overcoming life's difficulties. The stones responsible for the function are: malachite, moonstone, agate, aventurine and jade.
Helps to find inner peace, confidence and fearlessness.
Provides connection with your own subconscious. You will begin to better understand life, its goals and meaning, and cleanse your aura.
Citrine, onyx, charoite, carnelian and amber resist diseases.
Coral, rock crystal, cat's and hawk's eyes, and hematite will protect from damage.
You can build family happiness with your other half by weaving rose quartz, carnelian, charoite, malachite and garnet into a bracelet.

Popular articles DIY candy bouquets: with fruits and flowers, step-by-step photos for beginners

There are stones that will help improve health, protect, attract love and luck: jasper, agate and turquoise.

Black color is chosen by people who cannot and do not want to live according to the rules established in society.

Red will help you find your soulmate and promote love and happiness. It will also give you vital energy.

Orange will protect you from depression, charge you with positivity and attract good luck.

If you are looking for your own path in life, weave with white threads.

For those seeking natural secrets, green is the color to choose. In addition, it will give financial well-being.

Shambhala bracelet - what you need for weaving: list

In order to create a Shambhala bracelet with your own hands, you will need to stock up on the following things:

Beads. Their role can be played by ordinary glass beads or even precious stones. Gems of natural or artificial origin are also perfect. If you don’t yet have the skills to create such bracelets, it is recommended to choose simpler materials.
Metal drill or ultrasonic drilling machine . It's easier to get the first option. However, all this will be needed only if the selected stones do not have holes.
Cord - about 2 m. Most often it is recommended to purchase a waxed one. However, some craftsmen prefer various cords made of leather and synthetics, and durable tapes.
A centimeter - it will help you measure the parameters for your future bracelet with maximum accuracy.
Sharp scissors.
Sewing needle.
Scotch tape , glue .
Any source of fire - it can be a lighter, matches, or candle.
thick sheet of cardboard and a paper holder - according to numerous reviews, these devices make it easier to attach cords.

INTERESTING: If you want to follow the rules, you should make a bracelet of 9 beads. Either from 3, 12 – the selected quantity must be a multiple of 3.

Here's what you need to create your own Shambhala bracelet

Weaving a square knot

This weaving helps develop fine motor skills and attentiveness. For ease of understanding, we use multi-colored laces in our work. White is the main one, the knots are woven with a two-color cord. One side of it is blue, the other is yellow.

There is always a vertically located main blue cord in the center. To avoid inconvenience, first secure its ends with clamps. For these purposes, you can use the lid of a shoe box.
Under the blue main cord there is a two-color one. Its red segment should come out on the right side of the base, the yellow one on the left.
Throw the yellow end of the lace onto the warp thread. Then we pass it under red.
We draw a red cord under the main thread and throw it over the yellow one. We tighten it. This is our first square knot.
We put a yellow lace on the main thread, then pass it under the red one.
We draw a red cord under the base, throw it over the yellow one and tighten it again.
We tie knots one by one until the thread runs out. Ready! We can begin to study the technique of creating a Shambhala bracelet.

Square knot
Having mastered basic square weaving, don’t stop there. Experiment, find training videos and photos. Improve yourself and create your own unique pattern.

Weaving for beginners:

How to properly prepare stones to weave a Shambhala bracelet: tips, recommendations

If you want to make a Shambhala bracelet from stones that do not have holes, you need to prepare them. First you need to understand which stones are more convenient to process:

An ultrasonic drill can be used to shape any material. However, not everyone, judging by the reviews, likes working with him.
An ordinary metal drill can be used to make a hole in medium-density stones. That is, not too hard, but not brittle either. For example, in malachite, lapis lazuli, serpentine.
A diamond-coated tubular drill is recommended for processing harder materials. Craftsmen advise purchasing a drill with a diameter of 2-2.5 mm - this is the most popular option.

The procedure for drilling a stone is as follows:

To begin with, a mark is placed in the right place .
A patch is glued to the opposite side to prevent chipping.
literally 2-3 mm into the bowl, and a pebble is dropped into it.

IMPORTANT: By the way, the patch will help prevent the stone from slipping in the water. Therefore, you should not neglect its presence.

Next, a drill is applied and turned on at low speeds. It is better, according to reviews, to work gradually .
Every 15-20 seconds, the drill should be removed to remove debris from the hole.
Periodically, the drill should be wiped with sandpaper.

It is quite possible to make a hole in a stone for a Shambhala bracelet yourself

Shambhala bracelet for beginners: how to weave with your own hands, master class, diagram, photo

Before you start weaving a Shambhala bracelet according to a simple pattern, you need to cut the cord into 3 parts. They are all collected in a bundle and secured with something on the surface. For example, a paper holder on cardboard.

At the beginning of weaving a Shambhala bracelet, you need to fix the cords in this way

Next, the cord, marked in the picture with the number 1 , is superimposed on cord No. 2.

Scheme for starting to weave a Shambhala bracelet

Now you should take hold of cord No. 3. It is superimposed on piece No. 1.

Next, the Shambhala bracelet is woven like this

The first two pieces create a loop . Cord No. 3 is first passed under it , and then threaded into it and tightened. The first node can be considered completed.

Forming the knot of a Shambhala bracelet

In a similar way, you need to form several nodes. For example, 5 or 6.

Knots are an essential part of a Shambhala bracelet

Next, a bead on the middle rope . Or a stone. It is covered by a loop.

Placing a bead in a Shambhala bracelet

Then 2 more knots are made, after which the bead is strung again.

IMPORTANT: The beads must be looped as tightly as possible.

Stringing the next bead onto the Shambhala bracelet.
A similar algorithm is repeated several times. It is recommended to fasten the last knot with superglue.

The Shambhala bracelet chain should look like this

All that remains is to cut off the extra pieces of rope. And tie the ends of the bracelet together.

Cutting off excess on a Shambhala bracelet

Selection of stones and colors

The color of the beads can be selected in accordance with the element to which the zodiac sign belongs. For example, fire signs (Aries, Leo, Sagittarius) should give preference to various red, red-orange and orange shades in beads. Signs (Taurus, Virgo, Capricorn) entering the earth element are better off choosing yellow, yellow-brown, and brown tones. For Gemini, Libra and Aquarius (element of air), green, light green and blue colors are suitable. The rest of the zodiac signs (Cancer, Scorpio, Pisces) belong to the water element, therefore the colors should be similar to the aquatic environment, i.e. blue, lilac, blue-lilac, from bright and saturated to pale and translucent.

Article on the topic: Toy made of rubber bands on a slingshot and on a machine with photos and videos

All this knowledge for beginners in weaving a shamballa bracelet will be useful, because... all this will be useful in the process of work, and the direct weaving process can be examined using the example of a photo tutorial.

How to finish a Shambhala bracelet, how to weave a clasp: tips, recommendations, photos

If you want the Shambhala bracelet to be adjustable, you should finish knitting it by creating a special clasp. In this case, there is no need to connect the ends of the bracelet.

Instead, it is better to prepare a separate lace. It is desirable, of course, that it harmonizes with the bracelet both in shade and texture. If possible, it is better to completely cut off a piece of lace for the fastener from the main one in advance.

An example of double shamballa

With experience, you will want to weave a more complicated version of the bracelet, for example, a double shamballa bracelet.

How to weave double shamballa? Description below.

The length of the waxed cord increases to 3.5-4 meters, the number of beads is also doubled to 16 pieces with a bead size of 10 mm, depending on the size of the bead, more may be needed.

Weaving the beginning of the bracelet can also be done with a double flat knot, only not one knotted cord will be braided, but two. The diagram is presented below.

Related article: DIY paracord weaving patterns: instructions with photos

Having made a certain number of knots (4-8 pieces) for each knotted cord, i.e. those that pass inside the knot, beads are put on, and the working cords, first one, then the other, wrap the cords with beads in such a way as shown in the photo:

After wrapping, it is better to check again that the beads lie close to each other, and the bracelet weaving ends in the same way as it began, 4-8 pieces. double flat knots.

The clasp of a double shamballa bracelet is woven in the same way as for a single-row bracelet.

In a double Shambhala bracelet, and even more so in a triple one, you can create a large combination of stones or beads.

How to weave a two-color Shambhala bracelet: master class, diagram, photo

To weave a Shambhala bracelet so that 2 shades appear, you first need to collect 2 cords and one main one into a bundle. The main one will be practically unnoticeable - except perhaps in the area of the clasp. Therefore, in this case we can safely say that the bracelet will be two-color.

To begin with, the following blank is created for the bracelet:

Then the left cord is placed on the center one.

The blue cord for the bracelet is placed on the black one

Then the right lace is placed on the left. It should be threaded into a loop between other ropes.

The next stage of creating a Shambhala bracelet

The noose needs to be tightened. However, this must be done extremely carefully.

IMPORTANT: The middle cord must remain as straight as possible. Otherwise, the bracelet will turn out skewed in one direction.

Tightening the loop for the Shambhala bracelet
Next, the rope that is on the left should be placed under the central one.

Beginning of the formation of the second knot for the Shambhala bracelet

The newly made right cord is threaded under the left one and placed on the central one.

This is how the second knot for the Shambhala bracelet is tightened

Next, this cord is inserted into the loop, and the loop is tightened.

In a similar way, you need to make several knots called “square”. They will turn out to be two-color.

This is what two-color knots on a Shambhala bracelet will look like

Now you can thread a bead into the central cord .

Bead on the future Shambhala bracelet

in a similar manner to the previous one . Only this time it also covers the bead.

Covering a bead with a loop on a Shambhala bracelet

Then you can continue to weave knots . It is preferable that there are as many of them as in front of the bead.

At this stage, the future Shambhala bracelet looks like this

As soon as the master gets ready to complete the bracelet, he must tie a very ordinary knot . And then fasten it with glue and cut off the excess colored cords.

Fastening the blank for the Shambhala bracelet with glue

Meanwhile, knots are tied at both ends of the bracelet.

This is what the Shambhala bracelet looks like after weaving

All that remains is to weave the clasp - and the bracelet is ready! It is woven according to the standard pattern from a separate piece of cord.

This results in a two-color Shambhala bracelet

How to weave a talisman yourself: step-by-step instructions

First of all, you need to drive one nail into a special board. Then we tie the cord into a knot and tighten it tightly.
You need to thread the lace to the 2nd nail, and then cut the rope by 6 cm. You need to string beads onto the second end of the rope in the order in which you designed the product. After the stringing has completed, you need to pull the rope and twist it around 2 nails, and then tie a knot.
We weave macrame. No more than two and a half meters of thread are cut from the spool. After retreating 2 centimeters from the nail, we braid the warp rope and tie a standard knot.
Now the left part of the long rope will stick out a little higher than the right. The top part is where you need to create a macrame knot. To do this, we need the left piece of thread, which we must pass under the main rope and bring it over the piece that is on the right.
The right cord is passed over the main thread and placed under the knot of the left rope.
The next loop needs to be made in a mirror image.
Finally, the left section must be passed over the main rope, and later passed under the loop of the right side. It is necessary to tighten the cords and get a second knot.

We recommend: Powerful amulet - Dzi bead “Aristocrat”: meaning and rules of wearing

In the same way, you need to continue weaving the bracelet until there are as many such knots as you planned.

How to weave a clasp from beads and threads, how to make a lock?

After we have created a magnificent macrame bracelet, we can transform it into the most fashionable jewelry in the Shambhala style.

You need to weave at least eighteen knots, take the first bead and stretch it to the very last knot. It is necessary to braid it with the same loop, starting with the rope that was higher in the previous loop.
Now we will try to create a clasp so that our bracelet can be easily put on the hand and its length can be easily adjusted.
Let's close the ends of the entire weave and form a round bracelet. Each end of it, on which various knots are tied, must be directed opposite each other, holding them in parallel.
After this, we take the side ropes and create the same knot around the two parallel ends of the Shambhala bracelet.
It is necessary to weave five such knots, and the product will be completely ready for use.

The Shambhala bracelet is not only a stylish accessory, but also a magnificent spiritual object that will help you find love, maintain order in your family or work, and much more.

Men's bracelet Shambhala: master class, diagram, tips, photos

The Shambhala bracelet can often be seen on a man’s hand. As a rule, it is most often made in dark colors and contains more knots than beads. But, of course, this is a matter of taste. After all, you can choose those beads or stones that will perfectly suit a man’s look.

2/3 of the length from the cord - this will be the base. Most of the cord needs to be placed 10 cm, perpendicular to it.

IMPORTANT: For the male version, it is recommended to choose a hard, large cord. For example, paracord.

Before making a Shambhala bracelet, the cords need to be folded like this.
Next, you can begin to form a knot. To do this, the left side must be passed over the center and under the right side.

This is how the knot for the Shambhala bracelet begins to form

Then the right cord is threaded under the center and left ones. And he gets out of this resulting loop.

Continuing the formation of the knot for the Shambhala bracelet

The knot can now be tightened.

This is how the knot for a men's Shambhala bracelet turns out

Then the same thing happens as described above. But at the same time it’s as if in a mirror image. That is, the role of the left cord will be played by the right one and vice versa. Thus, you need to create a whole series of nodes.

Knots for men's bracelet Shambhala

Then you can start stringing the beads. After each bead you will again need to make a series of knots. And so on until the end of the bracelet. Regular knots are formed at the ends

Alternating knots and beads in a men's Shambhala bracelet

To secure the bracelet, you can thread its ends into knots on opposite sides. If this is inconvenient, you can use large needles or sewing hooks.

Securing the ends of the Shambhala bracelet

All that remains is to decorate the ends - attach beads to them, for example. secured using the most common knots. The remains are cut off - and the bracelet is ready!

This is how a men's Shambhala bracelet turns out

You can believe that the Shambhala bracelet carries energy, or you can be skeptical about this information. In any case, such jewelry will perfectly fit into the image of any person and will serve as a wonderful way to express your “I”.

Types of materials

When creating a bracelet, you can use beads of different qualities. These can be wooden, glass and natural stone beads, large beads. Beads are also made from polymer clay - these are very original and beautiful products that are varnished. Unique patterns and shapes give the bracelets originality.

Natural stones, if chosen correctly according to the zodiac sign or other characteristics, can become an amulet for someone who wears a Shambhala bracelet. It will bring real health benefits and protect people.

Weaving a Shambhala bracelet, or rather its result, also depends on the quality of the material, for example, the cord. It should be thick and decorative. Silk cords are often used, but nylon and waxed ones can also be used. The knots that will be knitted look very prominent and beautiful on these cords. This is what craftsmen who undertake to make a Shambhala bracelet should strive for.

Shambhala bracelets are not only a beautiful decoration. Since ancient times, it was believed that these bracelets protect a person from negativity and give inner peace, as well as strength to overcome all difficulties in life.

A master class with step-by-step photos will help you make a Shambhala bracelet with your own hands.

Materials and tools:

Board for assembling jewelry
White waxed cord
Red beads – 5 pcs.
Scissors
PVA glue or clear nail polish

Manufacturing:

We begin to weave a bracelet from a board for assembling jewelry: it is very convenient to make accessories by stretching the main cord between two nails of the board. However, it is not at all necessary to have this tool: you can weave a shamballa bracelet without it, without fixing the warp cord anywhere. If we have a board for assembling decorations, we tie the end of a waxed cord around it. Then we measure 50 cm of the cord, starting from the nail, and cut it off.

We string the prepared beads onto the same piece of white cord, using its second (untied) end. Then this end of the cord can be tied to the second nail of the board, which is located at a distance of 30-50 cm from the first.

We unwind the second piece of cord - its length should be at least 2 m. We tie the main thread of the bracelet with this cord at the beginning of the weaving (we tie a regular but strong knot).

We position our blank for the Shamballa bracelet so that the main cord is positioned vertically, and the knot we just tied is at the top. On both sides of the knot we see two long pieces of cord, 1 m long. Take the left part of the cord: pass it under the main vertical thread and place it on top of the right cord.

Now we take the right cord, pass it over the vertical thread and bring it into the loop formed by the left thread.

We carefully tighten this combination and see that the cords are tied into a kind of knot.

This is the basic macrame knot that underlies all Shamballa bracelets.

Popular articles Fun of the day: making a scented candle at home

In the same way, close to the first macrame knot, weave the second one. Only this time we start with the right cord and complete the combination with the left thread.

40 macrame knots - this is exactly how much we need to knit at the beginning of the shamballa bracelet. Don’t forget to alternate the role of the cords: we start one knot on the right, the next one on the left.

We move the first red bead to the macrame knots and begin to weave it into the product. To do this, we braid the bead with a regular macrame knot.

And tighten the cords tightly.

After this, we weave three empty macrame knots and move the next bead to the weaving. We braid it with a macrame knot, then weave three knots and move the next bead. Using this pattern, we weave all five red beads into the bracelet.

After the last bead, we need to knit 35 macrame knots - 5 less than there were at the beginning of the decoration. We will weave 5 more knots later - thereby balancing the number of knots on both sides of the Shamballa bracelet.

On both sides of the bracelet, retreating 5 cm from the main thread, we tie one regular knot and cut off the cord beyond the knots. At the same time, we cover the nodes themselves with PVA glue or transparent nail polish to fix them.

Now we are making an adjustable clasp for the bracelet: here we will knit another 5 macrame knots. We connect the bracelet into a circle and put together both ends of the cord with knots. Using side cords we braid a macrame knot around them - exactly the same as all the knots on the bracelet.

Then we tighten the cords and weave 4 more knots around the two ends.

The clasp is almost ready, but we need to get rid of the side cords that will no longer be needed. We tie them into two strong knots on the wrong side of the bracelet and cut them off with scissors. Don’t forget to lubricate the knots with glue so that they don’t unravel.

We have a shamballa bracelet with an adjustable clasp. Thanks to the fact that we braided two ends of the bracelet with five macramé knots, we can now move the bracelet apart and close it so that it can be worn on any wrist.

And thanks to this video, we suggest you familiarize yourself with how to create an openwork Shambhala bracelet:

We also suggest, if you are interested in needlework, that you read our following articles:

About the shibori technique
About bead weaving
About creating bracelets from red thread
About the kazansha technique