Every year, homemade jewelry becomes more and more popular. This is not surprising, because you can realize any of your ideas and create the most suitable products. That is why we have selected several master classes, among which you will definitely find something interesting.
Rope bracelet
Sometimes, even the most beautiful decoration can be made literally from scrap materials. In this case, the base will be the simplest rope.
For work we will need:
- rope;
- golden wire;
- small diameter brass tube;
- pliers;
- lighter;
- wire cutters;
- paper;
- centimeter.
Cut a piece of rope to the required length. We measure 1 cm on the tube, make a mark and cut it off. Fold the rope in half and put the tube in the middle.
Using a lighter, we process the edges of the rope.
Cut a short length of wire and bend the edge as shown in the photo. We secure it to a bent rope, wrap it several times and secure the second edge.
We make a hook from wire to secure the bracelet.
We fix this part on the second edge of the bracelet.
Stylish, original bracelet is ready!
This product looks good in different shades, so feel free to experiment.
Protective embroidery
It is believed that the most powerful amulet against evil forces is an embroidered bracelet. Since ancient times, a large number of protective symbols have been created, which are also used in amulets. Such symbolism is very often used in any amulets and not only in bracelets, but also in embroidery of clothes, necklaces and others. Such methods are often resorted to to protect the child. After all, children are pure and defenseless, and this always attracts any ill-wishers. When creating such a bracelet, you should pay special attention to what the craftswoman is thinking about during the work process, because the energy power of the protective jewelry will depend on this.
Related article: DIY plastic bottle vase for flowers with photo
To create you need:
- blue linen material or gray canvas;
- threads in the color of linen or bleach;
- wood beads to make a clasp.
We take the material so that it is 16 cm long and 24 cm high - cross. The length of our product can be adjusted depending on the size of the hand, leaving 1 cm for the fastener. We begin to embroider, while retreating 2 crosshairs from the edge on the top and on the left side. We should also have 2 crosshairs at the bottom. We finish the pattern at the same distance as on the other edges.
We embroider the pattern with a cross according to the diagram.
The essence of this weaving is to master several knots to secure the thread at the beginning of creation and at the end. In our case, we need to learn how to make forward and reverse knots.
We take threads of two colors, mostly red and white, the length should be about a meter. Lay out the threads on the table and secure with tape for convenience. You can use other fixation methods that are more suitable for everyone.
We leave the edge untouched and begin making knots in the order shown in the diagram. When the pattern is completed, we braid braids on both sides of the bracelet for ease of tying.
Stylish bracelet made of nuts
Let's prepare the following:
- cotton thread or twine;
- nuts – 18 pcs.;
- scissors.
Cut three threads of the same size and tie a knot at the top. We intertwine the threads like a simple braid. We put a nut on one of the threads and thus weave it, as shown in the photo.
Add a few more nuts one by one.
We repeat the same until all the nuts are woven in. After this, we do the usual weaving, as at the beginning of the bracelet.
The length of the bracelet depends on your preference. In this case, it wraps twice around the wrist.
Delicate lace
Other materials are also used to create bracelets. They can be made from ribbons and beads, as in the photo:
Article on the topic: 3D Fish cake made from sugar mastic. 50 ideas
Made from lace and beads using glue.
Weaving into a chain.
Or weaving lace from beads.
Lightning Bracelets
Perhaps the simplest option, which is perfect for beginners, is lightning bracelets.
We will need:
- lightning;
- scissors;
- pliers;
- clasps for bracelets.
First, trim off the excess fabric, leaving only the zipper. We attach a clasp for the bracelet on each side and press it with pliers.
A simple but at the same time cute bracelet is ready.
For those who want to make a more complex option, we suggest making an unusual bracelet from lightning.
You will need the following:
- several lightning bolts of the same color;
- scissors;
- glue gun;
- toothpicks;
- pliers;
- clasp.
First, measure the required size of the bracelet and cut off the excess part.
Trim the excess fabric from the three zippers and separate them. Lay out the zippers in a pattern and secure with hot glue. Using a toothpick, remove any remaining glue.
Attach the clasp to the bracelet with pliers.
This decoration will be a stylish addition to every look.
From polymer clay
We offer you another way to create the bases for polymer clay bracelets. We will need:
- polymer clay (you can use leftover material from previous crafts);
- knife;
- fimo-gel;
- metal bracelet.
- We take the remaining clay and roll it out to the desired thickness, about 3 mm. If you have a special paste machine for rolling out clay or plastic dough, then use it to roll out the material.
- Now we need to shape the future bracelet. Let's use a metal base. Carefully cover the bracelet with clay. Cut off excess with a knife.
Closed bracelets should be cut lengthwise to make it easier to remove them from the mold.
After the bases are ready, you should put them in the oven to bake for 30 minutes. Before putting a closed bracelet into the oven, you need to lubricate the seam with fimo-gel, then close the joint with clay.
Ready.
Master classes on creating the basics for polymer clay bracelets are in front of you.
Bracelet with pompoms
Jewelry does not have to be laconic or luxurious. In everyday life, you can safely wear something unusual or cute, delicate. For example, a bracelet with pompoms will definitely not go unnoticed by others.
We will prepare the following materials:
- yarn;
- device for creating pompoms;
- scissors;
- pins;
- pliers;
- chain;
- rings;
- clasps for bracelets.
First, we make pom-poms from threads of different shades. We use a special device for this.
We thread one pin through each pompom.
Cut off the excess part and bend the tip into a ring. If necessary, attach additional rings. We connect the parts together using a chain.
We attach fasteners to the workpiece on each side. The original handmade bracelet is ready.
This product will become a stylish decoration for any outfit.
Beads and ribbon: beauty is in the details
What to take: ribbons, beads, needle, thread.
How to do:
Insert the thread into the eye and tie a knot. Take the ribbon and make a triple fold in the form of an accordion.
Thread a needle through the resulting fold. String the bead.
Repeat until the bracelet is ready. Tie the resulting product with a bow.
Bead decoration
A bracelet made of beautiful beads is one of the easiest ways to decorate yourself. All handicraft stores provide a wide range of beads and related accessories, so the look and shape of the finished bracelet is limited only by the imagination and skills of the needlewoman.
For the first experience of making a bracelet from beads with your own hands, any suitable materials will do. For the base, you can take a chain, stretching or metal fishing line, or ribbon.
The range of beads is amazing: glass, wood, metal and others. By combining different types of beads you can get real masterpieces of costume jewelry.
And you can start your creative journey with the easiest bracelet to make. Different or identical beads are strung onto a stretching fishing line, then a knot is tied. The excess fishing line is cut off, and the ends are hidden under the beads.
