Men's shorts pattern

Pattern of men's shorts with elastic

The pattern for men's shorts with elastic was one of the first to appear on the site, which is clear from its serial number.
The pattern was built, as I already indicated, for the cheerful knitwear in the mice. Actually, this knitwear forced me to create a separate pattern, and not to dance from the existing one.

The drawstring from which the shorts were made is a rather flimsy material for a man, but due to the increased width of the shorts, it turns out to be quite reliable.

The pattern should be suitable for sewing simple men's family pants, if, of course, I remember them correctly. For panties it is better to use knitwear, but classic satin is also suitable.

Cutting men's shorts with elastic

The pattern for men's shorts is made without seam allowances; we will add them ourselves. The width of all allowances for sewing on a regular sewing machine is equal to the width of the foot, for an overlocker - the width of the stitch. We cut the pockets with an allowance of 1 cm, at the top - 2 cm.

The pattern for men's shorts with an elastic band already contains a one-piece waistband and a hem; nothing needs to be added except for processing allowances.

We will cut out two front and two back halves; there may be one or two pockets. I sewed one with a zipper.

Sewing men's shorts with elastic

Like other belt patterns of this type, this one is extremely simple.

If we make a pocket, then we start with it. We iron the entrance to the pocket twice and secure it with parallel finishing stitches. Iron the remaining sections of the pocket to the wrong side by 1 cm.

From the pattern we transfer the lines for the location of the patch pocket, sew the pocket with hand stitches or pin it and lay finishing lines at a width of 0.1 cm from the edge and, if desired, a second one the width of the sewing machine foot from the first.

Sew side, middle and crotch seams. You can change the order, it does not matter fundamentally. Press and press the seams. On the wrong side, iron the bottom and top seam allowances of the shorts with an elastic band by 1 cm.

note

The second time we iron along the lines that were transferred from the pattern. We baste the hem allowances to the shorts with an elastic band and secure them with finishing stitches on a sewing machine, departing 0.1 cm from the ironed edges.

At the top near the front middle cut in the waistband we leave a hole for threading the elastic.

We thread the elastic, specify the length, grind the ends together, sew up the hole using a typewriter.

We delete temporary lines.

Pattern for men's shorts with elastic (3858 Downloads)

data-matched-content-rows-num=”4.2″ data-matched-content-columns-num=”1.2″ data-matched-content-ui-type=”image_stacked,image_stacked”

Source: https://porivan.ru/vykrojka-muzhskix-short-na-rezinke/

Nuances and features

There are several options for creating a pattern with your own hands. One of the simplest is to rip open some old and unnecessary, but well-fitting pants or shorts, iron them and draw them on paper. Such details can serve as patterns. Another option is to download your favorite base from the Internet. And modify it accordingly, according to the features of your structure. Now there are a huge number of sites that can help you with this. Well, what is described above, take measurements yourself.

Large sizes have their own subtleties. After all, the structure of the figure is distinguished by the presence of a belly or voluminous buttocks. This should be taken into account when modeling. Before making a pattern, you should ask how a man prefers to wear shorts, because they often drop the waistband below the stomach. It happens that men like to pull their shorts higher. Here, too, adjustments need to be made.

To create a loose-fitting pattern, take a maximum of 50-60 millimeters. If there is a belly, appropriate changes are made. This helps not to restrict movement when walking.

You might be interested in Interesting pants patterns: step-by-step construction instructions

Sports shorts with an elastic band are perfect for practicing skills for a novice seamstress.

Athletic shorts

Decating is also an important part and is of great importance. Unfortunately, many materials shrink significantly after the first wash. For example, shorts can shrink by 7 centimeters. And it turns out that all the work done was in vain. To avoid this, decatification was invented. Experienced craftswomen do this before sewing. One of the easiest ways: soak the material in hot water. There is no need to add any products, then dry, smooth and start cutting.

Don't forget about seam allowances. This is an important point that can affect the result. Before sewing on a sewing machine, do not be lazy to sweep everything by hand. This may not seem necessary, but it plays an important role in the final result.

Men's patterns

Free patterns for sewing enthusiasts. Books on modeling and designing clothes, as well as home cutting and sewing. © 2011-2018 All patterns. Copying site materials is prohibited. All rights reserved.

Site Map

Source: https://all-vykrojki.ru/muzhskie-vykrojki

Patterns for men's trousers

The pattern for men's shorts for the site was one of the first to be created.
Catalog number 004. The shorts are short, you can sew them from a variety of fabrics, they are not designed for knitwear and elastic materials. On the old version of the site I mentioned that these were my first shorts in my adult life. I really like the pattern, I have sewn shorts several times from cotton and all sorts of viscose non-fabrics - I like the result. One note. A pattern for men's shorts with an elastic band, for example, is completely constructed with a one-piece waistband, but here you need to add another 5 cm to the upper cut of the pattern. During the first cutting, this feature was happily forgotten and, to get out of this situation, the waist line was lowered by 2 cm. The result was an almost denim fit, comfortable and familiar, and since then I almost always make shorts this way. But even with a waistband, the shorts fit well.

Pattern for men's shorts

Sewing things with your own hands is very cool, because manual labor is always valuable. And your loved ones will be pleased to receive such a wonderful gift. Today we will teach you how to sew men's shorts with your own hands.

To make good men's shorts, you will need fabric, matching thread, a zipper and buttons. The fabric can be cotton, linen or denim.

It is necessary to take the following measurements: waist circumference, hip circumference, product length (measured from the waist to the desired length). In addition, you need to leave a small allowance (from 2 to 8 cm) so that the shorts are not butted. It’s better to sew it in a little later than to cut a very narrow thing that will be uncomfortable to walk in.

Draw a pattern on special paper, you can print ready-made patterns from the Internet, or use old shorts. If you chose the latter option, then fold the shorts in half, lay them on the fabric and trace them. The pattern is ready!

If you like precision in everything, you can use our pattern for men's shorts:

How to sew men's shorts with your own hands

So, to sew men's shorts with your own hands, you need to cut out two front and two back halves of the product. Remember to leave some space for seams. Cut out all the pieces and start sewing them together.

First of all, let's deal with the pockets. Sew the corner to the lining, finish the seam and machine stitch it. Then sew the pocket lining to the front of the leg, turn the material inside out, sew a hem and two finishing stitches.

Important

Next, attach and pin all the blanks, sew the pocket and finish the seams. Using a separating stitch, we sew the edge of the pocket lining and the front half of the shorts. Sew the front halves together, while stepping back half a centimeter from the seam line.

We make a shelf (codpiece) that will cover the zipper. Its parts will be: one - double, the second - single. To sew a zipper to the product, you need to attach it to the right half of the shorts, cover it with a double piece of the codpiece and sew along the edge. After this, you need to go through a securing seam.

Now you can work on the single piece of the codpiece. Sew it right side to the left leg, turn it inside out, make a hem and secure the seam. Next, sew the zipper to the single piece. Once the snake is sewn on, turn the piece over and mark the seam line for the fly. Make two parallel lines along it.

Sew on the back pockets. First, sew the darts, then turn the fabric over and sew two strips to it, securing them with pins for security. Make a cut between the slats, turn the fabric inside out and sew the edges. Sew the first piece of fabric for the pocket, then the second and connect everything to the main fabric.

Next, sew the pocket and finish the seams. Sew on the button and your pocket is ready. Now you need to sew the side and crotch seams. Turn the trouser legs inside out, sew them and machine them. Don't forget to fold them in and finish them underneath. Your pants are ready!

Men's denim shorts

Old and unwanted jeans can be turned into great shorts. Fold the jeans in half, making sure the side seams are parallel to each other. Mark the length you need with chalk, then cut the legs along this line. If you hem the edges, leave an extra couple of centimeters for the seam allowance.

If desired, denim shorts can be decorated. To do this you will need a small grater and a utility knife. Using a grater, you can age individual areas of the fabric. Use a utility knife to make holes and pull out the threads along their edges. This is how you can sew original men’s shorts with your own hands without any special financial and physical costs.

Source: https://OtvetKak.ru/hands/vykrojka-dlya-muzhskix-short.html

How to take measurements

Taking measurements is a fairly easy process. Which does not require special skills and abilities and does not take much time.

Note! When taking measurements, the person for whom the shorts are sewn must stand straight, without straining, and also maintain good posture.

You might be interested in Description of hot fabric scissors: how to make it yourself

Also, the person being measured should not be wearing any bulky clothing that would allow the measurements to be taken incorrectly. It is better if he is as naked as possible or in thin, tight clothes.

Taking measurements

When taking measurements, you do not need to pull the tape too much. The waist is measured by placing a measuring tape horizontally on the floor, strictly at the waist. Hip circumference is also required. This is the widest part that covers the buttocks. Also shoot horizontally on the floor. Now you need to measure the circumference of one hip. To do this, it is worth grasping the thigh in its very upper part, also horizontally to the floor. The knee should be measured in a bent position at the level of the knee point. The angle should be 90 degrees. More seat height will be required. It is necessary to sit the person down and measure the height from the waist to the place where he sits.

You also need the length of the product. It is measured from the waist to the length you need: above the knee, knee-length, below the knee.

We sew men's shorts

Source

And even if you have already bought shorts for leisure, sew another one using our pattern - firstly, men's shorts sewn to individual measurements are a real exclusive, and secondly, such shorts will fit perfectly!

Pattern for men's shorts. Click to enlarge

Before you start creating a pattern for men's shorts, you need to take the following measurements:

Half waist circumference – 44cm

Semi-hip circumference (buttocks) – 50cm

Shorts length – 56cm

Constructing a pattern for the front half of men's shorts

From point A to the right and down, draw horizontal and vertical lines.

Length of men's shorts. From point A, set down the length of men's shorts according to measurement - point H: AN = 58cm - length of shorts according to measurement + 2cm.

Step line of men's shorts. From point A, vertically downwards, set aside 1/2 of the hip circumference according to the measurement plus 3 cm - point B:

AB=50/2+3 =28cm.

From point B, draw a horizontal line BG1 - the step line of men's shorts.

НН1 = 2cm

From point H1 draw a line parallel to line AT.

Waist width of the front half of men's shorts. From point A along the line to the right, set aside ½ the circumference of the hips according to the measurement plus 3 cm - point T: AT = 50/2 + 3 = 28 cm.

From point T, draw a perpendicular down; At the intersection with the step line we place point B1, and at the intersection with the length line - point H4. H4H2 is equal to 1cm.

We connect points H and H2 with a slightly concave line.

The width of the bottom of the front half of men's shorts. H2H3 is equal to 5cm.

TT1=1cm

Connect points A and T1 with a straight line.

Step width of the front half of men's shorts. From point B1 along the step line we set aside 1/10 of the girth of the buttocks to the right according to the measurement plus 0.5 cm and set point D: B1G = 50/10 + 0.5 = 5.5 cm.

B1B2=9cm.

Connect points B2 and G with a concave line, points G and H3 - connect with a concave line.

Additionally, build a one-piece zipper valance 4 cm wide and about 20 cm long along the length of the zipper.

The pattern for the front half of men's shorts is a green outline.

Construction of the back half of men's shorts.

Back seam of men's shorts. T1T2=2.5 cm.

Connect points G, T2 with a straight line and continue upward from point T2.

From point T2 upward we set aside 4cm and place point A1: T2A1=4cm.

Connect points A, A1 with a straight line.

Step width of the back half of men's shorts: GG1=4cm.

The width of the bottom of the back half of men's shorts: H2H3=3cm.

We connect points G1 and 2 with a curved line. G1G2=1cm.

Connect points H and 2 with a slightly concave line. Connect points A1 and G2 with a slightly convex line, as shown in the pattern of men's underpants (red line).

The pattern for the front half of men's shorts is a red outline.

Men's shorts are cut according to a pattern on fabric with a seam on the side. You can cut the shorts unfolded without a side seam, if the width of the fabric allows.

When cutting shorts on fabric, allow 3 cm for the hem of the shorts, 4 cm for the gathering along the top, and 1 cm for all other seams. An elastic band 3 cm wide is measured around the waist with a slight stretch.

Source: https://dushka-li.ru/post224356620/

Men's shorts: pattern

Let's look at sewing and patterning knitted shorts with elastic. You won't believe it, but it's very simple. Even a beginner will be able to cope with the task. These shorts, which have side pockets, are very comfortable to wear. First you need to build a pattern on paper and then cut it out. Some can do it directly on fabric so as not to waste their time.

Pattern 1

This pattern is suitable not only for men's shorts, but also for shorts for teenagers, as well as for sewing family pants.

How to take measurements is already known. Therefore, they already exist: the length of future shorts, seat height, waist and hips.

Now you should prepare everything you need: fabric, paper, pencil, elastic band, scissors, sewing machine with sewing accessories, elastic band 250 millimeters wide, and interlining for pockets. There is no need for stationery if everything is done right away on the fabric.

1. You should start by building the front halves. From the waist line, lower the seat height. Now count 40 millimeters to the left. Make a smooth line creating the middle of the front.
2. Next, mark the hip circumference from the drawn seat line. From the drawn waist line, count the waist circumference to the left. Now set aside a couple of centimeters along the bottom line to narrow it. Connect the dots you got. Extend these points to the very bottom to create the sides.
3. Divide the seat line into two. These will be ironings. Next you need to draw the pockets. From the seat line, count 40 millimeters upward. Set aside 60 millimeters from the waist. Connect the dots. I'm done with this pattern.
4. Now construction of the rear halves. Attach the front halves, step back 80 millimeters from the sides, and transfer all the lines. Set aside 80 millimeters along the waist. Set aside 50 millimeters from the sides along the seat and 20 millimeters along the bottom. Connect everything.
5. Raise 30 millimeters along the central seam. Connect this at the waist. Decorate the middle of the back half. Next draw a pocket.
6. Cut out 2 pocket pieces. Lay out the parts on the material, circle, leaving allowances.

You might be interested in everything about stylish patchwork from Gella Chara

Note! If the fabric is elastic, then this will work, but if not, then it is better to leave more room for allowances.

1. Put 40 millimeters down on the hem. Widen the sides by 20 millimeters. Cut out all the details. Multiply the width of the elastic by two. It’s also worth adding the seam allowance, that is, another centimeter and a half. To calculate the belt, add 120 millimeters to the waist. And don't forget the seam allowance.

Pattern No. 2
Additional information! For sewing, it is better to use a zigzag stitch. This will stretch the fabric so that the seam does not tear.

Now sew all the details and the knitted shorts with elastic are ready!

Pattern of men's underpants

Every woman, receiving a sewing machine as a gift, first of all promises her men to show it in action by sewing their underpants.

And really, what better way to show care for your loved ones and show off your sewing skills at the same time? However, not everything, of course, depends on the sewing unit.

The quality of the fabric also plays a big role; it is best to take cotton knitwear, and, of course, a correctly constructed pattern.

This is especially important if you decide to sew a tight-fitting model for an overweight man (starting from size 56). It is also worth considering the figure (a man may have a belly, in this case it is better to choose a model of family briefs). In any case, you should always sew with love and patience, putting only positive emotions into your work.

This model is one of the most popular underwear among both the younger generation and older men. More recently, numerous studies have confirmed the undoubted benefits of family briefs for men's health, especially in comparison with other styles.

Traditionally, men's briefs of this type are made from printed satin, but now, among the huge selection of different fabrics, you can choose any other to your taste. The main thing to remember is that natural fabrics are still the most comfortable for humans.

Advice

If you have chosen this particular model, then you will undoubtedly need a pattern of men's family briefs with already made allowances for seams, for hem and elastic band.

Print out the pattern, be sure to check that the scale matches the 10x10 square: its side should be exactly 10 cm long.

The pattern is designed for sewing size 48 panties. If the required size is larger, for example, you need size 60 panties, then we must calculate the difference. It comes in 12 sizes.

That is, we need to increase the circumference of the hips according to the pattern by 12 cm (6 for the front and back) and move the parts of the pattern apart by 12 cm.

However, due to the fact that overweight people have an even more individual figure than thin people, it is still better to compare the data with individual measurements.

Also below you can download a pattern of panties for sizes 50-52. And the link in the Word document provides sewing instructions.

Description.doc [27.5 Kb] (downloads: 517)

The undeniable trendiness of boxers has been undeniable for many seasons now, only gaining popularity, especially among young men. Therefore, if you decide to please your man with such a gift, he will certainly appreciate it. And if you also decorate your panties with an appliqué or some saying that only you two understand, you can add irony or an erotic note to the relationship.

The finished pattern is available for download using the link below. It is designed for size 50 - 52, hip volume 102-104 cm. It can be adjusted by changing the length to your liking for greater comfort.

note

The pattern itself does not imply changing the size, however, having some knowledge in constructing patterns, you can increase it by making, say, size 50 from 50 to 58.

boksery50-52.pdf [282.46 Kb] (downloads: 240)

Pattern of men's briefs with gusset

The next option for men's underwear is briefs with a gusset. Many men choose this particular model because of its convenience, rejecting all other options. Therefore, if you are sewing specifically for such a fussy person, you will need a pattern of men's swimming shorts with a codpiece insert.

Plavki_shorty_48.pdf [16.74 Kb] (downloads: 160)

The pattern is made for size 48. If you need a pattern of size 54 or 42, then it will need to be increased or decreased.

Video selection

We also present to your attention a selection of videos and master classes dedicated to sewing men's underwear. We are sure that they will be useful to you and will complement the information received in the article.

Source: https://webdiana.ru/dom-i-semya/rukodelie/2645-vykroyka-muzhskih-trusov.html

Download pattern Men's sports trousers 44.46.48.50.52.54.56.58.60.62.64

MBR01 sweatpants

– The trousers are straight at the waist.

Available in sizes 44-54, height 182, fullness
II
HOW TO CHANGE THE PATTERN ACCORDING TO HEIGHT

Recommended materials

footer, interlock, academician, knitted fabrics with elastane.

Product of medium volume, detachable belt at the waist, with an elastic band, patch rectangular pockets with a placket.

Don't forget to count fabric shrinkage!!!

Increase in hips 4.4 cm, -8.8 cm in volume.

Average consumption

with a fabric width of 180.0 cm, about 1.15-1.30 m for sizes 44 and 54, respectively.

Average consumption

with a fabric width of 150.0 cm, about 1.40-1.55 m for sizes 44 and 54, respectively.

WITHOUT SELECTING A DRAWING!!!

Depending on the type of material, it is recommended to lay out paper patterns to determine the exact consumption!!!

All patterns are given with seam allowances.

Patterns have marks and margins, we combine the printed lines!!! All documents, multimedia and texts posted on easysew.info are the intellectual property of the site administration (Article 1270 of the Civil Code of the Russian Federation).

Products - pdf patterns are for customers personal use. Resale of patterns is prohibited.

Public posting of links to download goods on the Internet, social networks and mass media is a violation and entails punishment in accordance with current legislation.

Source: https://easysew.info/men/bryuki-sportivnye-muzhskie-detail.html

Pattern of men's family panties, how to sew men's panties

The pattern of family briefs is not as easy to make as it might seem, especially boxers for men with bodies starting from size fifty-six. Inaccurate calculations will lead to the fact that the panties begin to compress some parts of the body, and the threads in the seams will break.

The pattern of such panties is almost a separate part of men's trousers, so in order to create an accurate pattern and sew the details, it is necessary to do a little calculation and adjust a lot after fitting. After that, based on these calculations, you can create an excellent pattern and work with it for a long time, not only when cutting panties, but also to work on simple summer shorts with an elastic band.

The easiest way to make a pattern is on graph paper.

Men's family boxers should be loose, hygienic, comfortable, and therefore the materials for sewing boxers should be soft, simple and thin, but at the same time they should be strong and have a stable color. It is recommended to use chintz, satin or plain calico for sewing panties , 90 or 150 centimeters wide.

What measurements should you take for men's underpants, step-by-step instructions.

Let's look at the pattern of men's underpants, created with small shorts without inserts.

• To create a drawing for a boxer pattern, we use the following measurements: St = 41 centimeters, Sat = 50 centimeters, Oh trouble. = 55 centimeters.
• For example work, we took measurements: 176-96-82.
• St is the waist circumference.
• Sb - hip circumference (measurement across the buttocks).
• Dinner. - thigh circumference in higher places.

To prevent the finished item from being too tight, allowances for loose wearing are used when creating patterns. Increases for sewing family boxers: Pb tall. = 2 centimeters, Pb bad. = 6 centimeters. For this size, let’s take an increase of two cm at the waist and six cm at the hips.

Constructing a pattern for men's underpants

Let's start building the pattern by creating a vertical line on a piece of paper with the vertex located at point A.

• From this point down we set the seat height: AN = 0.5 C6 + 1 = 0.5 X 50 + 1 = 26 centimeters and find out the length of the family panties using the formula:
• AN2 = AN + 7 (increase) = 26 + 7 = thirty-three centimeters.
• We will do the calculations sequentially: first for the front part of the product, then for the back part.

How to cut men's family boxers

To make it easier to cut and sew the fabric, we transfer the drawings of both halves of the product pattern to another piece of cardboard along with our allowances.

Allowances in the drawing are indicated in centimeters.

It will be easier for you to use the created product patterns with allowances when laying out the fabric. At the same time, with this pattern you will remember that you need to create seam allowances. The patterns may need to be changed after some time, so it is better to make test boxers, make sure that the pattern and calculations are accurate, and then transfer everything onto cardboard. These patterns are easier to use when cutting and laying out the material.

Both parts of the product must be cut out completely . To do this, simply combine the side seams of their parts together, then instead of four parts you only have two. Both halves of the product can be cut without side seams.

The boxer brief pattern can be created without side seams. This will not only make it easier to create the product, but will also reduce the number of seams. But it’s not always easier to work with such a pattern. It is much more convenient to make it from 2 parts, and if necessary, along the side seam you just need to put everything together.

Layout of panty pattern pieces on fabric.

When folding the patterns of both sides of the halves of the product onto the fabric, you need to follow the direction of the grain thread on the patterns and fabric. Thread directions for different material widths are marked with arrows.

Look at the fold line of the material for each width of material. If the fabric is 90 centimeters wide, fold the fabric in half along a special thread.

In this case, for pant size 176-96-82 you will need 1.04 meters of material.

With a material width of 140 centimeters, we fold the material using a special thread (across the fabric). In our case, the fabric consumption for the size of this product 176-96-82 is 0.52 m.

If you need to sew men's boxers of a large size, somewhere in size 56 and above, then the pattern of the product must be made with an insert for the back half. The layout of the product will have to be changed a little and an auxiliary wedge added to it.